• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.4 no.2
• /
• pp.1-7
• /
• 2008

GSHP(Ground Source Heat Pump) has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the system reliability has been key issues and barriers to insure a better system performance as designed originally in ISO (international standard organization) standard. This paper introduces a systematic method to verify its intended design target so called as ISO performance data based commissioning technology for a water to air GSHP system. The commissioning technology starts from are to the international standard ISO performance data of a GSHP model and to compare its installed operation data and to calibrate and tune to the target optimum operation parameters. Results indicated that cooling capacity could be raised up to 76.6% from 46.6% from this proposed commissioning technology.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.190-200
• /
• 2007

A pyrogen type igniter was designed to satisfy the requirements of KSLV-I Kick Motor system. To insure the reliability of the igniter before the production of the flight model, we have been performed the structure, environmental, combustion tests. The hydraulic test was carried out to confirm the strength of the components of the igniter. The shock and vibration tests were considered to check whether the igniter operates normally under the severe environmental condition. The combustion tests were also performed to understand the ignition characteristics with the variation of initial condition. Finally, we confirmed that the igniter could provide the acceptable energy to ignite the propellant of kick motor at the ground test.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.1-9
• /
• 1999

Surgical treatment was performed on the 39 cases out of 76 cases of entrapments of the thoracic outlet. The remaining 36 cases of entrapments were treated by conservatively. The operated cases were categorized as follows. They were 34 cases of scalenus anticus syndrome, 1 of cervical rib syndrome, 2 of costoclavicular syndrome, and 2 of hyperabduction syndrome. 1. Scalenus anticus syndrome : Anterior scalenotomy was performed by simple sectioning of the attachment to the first rib. 2. Cervical rib syndrome : Complete decompressive resection of cervical rib sometimes required both anterior and posterior approaches to avoid over-retraction of the brachial plexus. 3. Costoclavicular syndrome : Partial decompressive claviculectomy was undergone instead of conventional total claviculectomy. 4. Hyperabduction syndrome : The resection of coracoid process was performed as well as conventional tenotomy of pectoralis minor muscle to insure free up-and-down moving of neurovascular bundle at the time of hyperabduction. Every diagnostic maneuver was tested at the time of operation to observe whether or not neurovascular decompression including restoration of radial pulse was sufficient. Despite of the postoperative vascular restoration was inmediate, neurogenic symptoms were improved slowly. Because this entity is essentially chronic nerve injnry, its recovery needed a couple of months or several. Although improvement was slow, ultimate results were definite. Complication was not observed.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.107-115
• /
• 2006

Control charts are important tools of statistical quality control. In 1956, Duncan first proposed the economic design of $\bar{x}-control$ charts to control normal process means and insure that the economic design control chart actually has a lower cost, compared with a Shewhart control chart. An moving average (MA) control chart is more effective than a Shewhart control chart in detecting small process shifts and is considered by some to be simpler to implement than the CUSUM. An economic design of MA control chart has also been proposed in 2005. The weaknesses to only the economic design are poor statistics because it dose not consider type I or type II errors and average time to signal when selecting design parameters for control chart. This paper provides a construction of an economic-statistical model to determine the optimal parameters of an MA control chart to improve economic design. A numerical example is employed to demonstrate the model's working and its sensitivity analysis is also provided.

• Journal of Korean Society for Quality Management
• /
• v.7 no.1
• /
• pp.15-25
• /
• 1979

Recently ('70~'76) the average annual export expansion rate was 31.7% (the foremost rate in the world). In '77 the export amounted to 10 billion dollars, and 12.7 billion dollars in '78. The tendeney has been to increase yearly. In view of the structure of export goods, the major export products have been changed from primary industrial materials (86% of the total export in '76) to industrial products (82% in '75). These trends are due to the remarkable progress in the technology advancement. Only 33.6% of the total export items can compete with those of advanced industrial countries in both of price and non-price competitiveness, therefore ours stand in weak position to that of advanced industrial countries. In order to promote good will and strengthen international competitiveness, the major stress of this paper is first of all on the problems of Quality Control, which covers the present states and derived problems of Quality control. These are investigated and analyzed to insure the rational application of Quality Control to the major export goods with a view of the establishment of the direction and systematic improving means of Quality Control.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.565-571
• /
• 2005

The method to decide media sphericity on the filter has been investigated. The sphericity, the ratio of the surface area of an equal volume sphere to the real surface area of the particles, is one of major physical characters of media affecting the bed expansion during backwash. The media in each treatment plant may have different sphericity, and the sphericity of the media in the filter may be changed as backwashing has been conducted regularly for a long time. Media from twelve water treatment plants under KOWACO have been collected and selected to insure various and practical sphericities. The sphericity of each media has been calculated by using well known equations. For example, Kozeny equation, Dahmarajah equation and so on. The experiment results have indicated that the sphericity of each water treatment plant is different. Although the sphericity values measured by different methods were turned out to be diverse values, the order in the magnitude seemed to be the same. The sphericity values of sand media were in the range of 0.71-0.82 and those of anthracite were placed between 0.49 and 0.56 by the Dharmarajah equation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.95-107
• /
• 2000

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity, so that the dredging project which is composed of excavating, removing, transporting, storing and disposing dredged material must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe manner. The most important point in dumping operations is an estimating and reducing the impacts of discharges at the dumping area. One of the most effective method for the reduction of ecological impacts at dumping area is using the schematic process composed of the sophisticated plan, precise work and predicting/reducing the impacts based on the numerical model and field observation. In this study, the numerical model is used to predict the near-field spatial fate and begavior of effluent discharged from Confined Dumping Facility(CDF) located near coastal area. To to this purpose, reappearing of tidal current was preceded. The model is then applied to Mokpo harbor, where capital dredging and maintenance dredging are conducted simultaneously and the CDF is under construction;. In the series of model case study, we found that the near-field behavior of effluent discharged from CDF was governed by the receiving water condition, outfall geometry, characteristics of efflent and CDF operating conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1731-1737
• /
• 2007

The Korea electricity wholesale market is operated under the cost-based-pool system and the government regulation to the new generation capacities in order to insure the resource adequacy. The goal of government's regulation is the electricity market stability by attracting proper generation investment while keeping the reliability of system. Generation companies must mandatory observe that government plan by now. But if the restructuring is to be complete, generation companies should not bear any obligation to invest unless their profitability is guaranteed. Namely the investors' behavior will be affected by the market prices. In this paper, the system dynamics model for Korea wholesale electricity market to examine whether competitive market can help to stabilize is developed and analyzes the investors behavior. The simulation results show that market controlled by government will be operated stable without resulting in price spike but there is no lower price because of maintaining the reasonable reserve margin. However, if the competition is introduced and the new investment is determined by the investor's decision without government intervention, the benefits from lower wholesale price are expected. Nevertheless, the volatility in the wholesale market increases, which increases the investment risks.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.15
• /
• pp.239-261
• /
• 2001

There are many kinds of risk in int'l trade by internet network, such as credit risk, mercantile risk, contingency risk, exchange risk, physical risk and the risk on internet network. Especially, risk management against credit risk and the risk on internet network are very important. The former is conventional but more important these days. The latter is a new risk that has been incurred owing to the int'l trade by internet network. The system of risk management against the former are firstly, to surely research credit of counterpart by internet, secondly, to certify the entity by password or fingerprint, thirdly, to pay the price under a letter of credit, fourthly, to use the system of int'l trade such as bolero, trade card, finally, to use the authority of electronic trade services. The system of risk management against the latter are firstly, to install the firewall on the own computer network, secondly, to entrust the management own computer network to the network security services firm, thirdly, to electronically communicate with counterpart through the certification authority, finally, to insure against the own network risk with the security insurance company.