• 설비공학논문집
• /
• 제16권10호
• /
• pp.889-894
• /
• 2004

Infrared (IR) detectors are widely used for many applications, such as temperature measurement, intruder and fire detection, robotics and industrial equipment, thermoelstic stress analysis, medical diagnostics, and chemical analysis. Quantum detectors commonly need to be refrigerated below 80 K, and thus a cooling system should be equipped together with the detector system. The cooling load, which should be removed by the cooling system to maintain the nominal operating temperature of the detector, critically depends on the insulation efficiency of the cryochamber housing the detector. Thermal analysis of cryochamber includes the conduction heat transfer through a cold well, the gases conduction and gas outgassing, as well as radiation heat transfer, The transient cooling characteristics of an infrared detector cryochamber are investigated experimentally in the present study. The transient cooling load increases as the gas pressure is increased. Gas pressure becomes significant as the cooling process proceeds. Cool down time is also increased as the gas pressure is increased. It is also found that natural convection effects on cool down time become significant when the gas pressure is increased.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.744-751
• /
• 2018

This study aimed to provide the information on the thermal sensation and the amount of clothing worn of junior high school students in winter classroom the relation with their climate adaptability. Total usable questionnaires were obtained from 467 male and female students. The questionnaire included general characteristics, physical characteristics, self awareness of body shape, climate adaptability and subjective thermal sensation in winter classroom. The data were analyzed using SPSS Statistics 18.0 for frequency analysis, factor analysis, chi-square analysis, t-test and correlation analysis. The results were as follows. The average body type based on BMI was normal($20.1kg/m^2$ ). Females perceived their body type as thinner than males. They wore more (8.67 garment items compared to 8.14 for males). Only about 25% of students voted the thermal sensation to neutral(47% cool~very cold, 28% warm~very hot). Females were more sensitive to the cold, perceived less healthy, and wore more garments in the cold. Students felt colder in winter classroom when their cold adaptability was lower and they actively adjusted thermal insulation against the cold. It is recommended to suggest the guidelines for the proper indoor temperature and for the wear behavior in classroom in the perspectives of increasing the learning efficiency and improving the students' climate adaptability.

• 한국농촌건축학회논문집
• /
• 제21권2호
• /
• pp.1-10
• /
• 2019

This research aimed to identify characteristics of housing repairs for the weak class in rural area. Data are analyzed by the status according to year focusing on voluntary activity of the Korean Institute of Rural Architecture that is performing more than 10 years. The results are followings. First, approximately 63.3% of residents living in benefit houses are 70s and 80s in their age. They are weak in financial and physical and they have more than two weak points. Second, housing repairs were performed total 1,990 cases among 797 houses and average 2.5 cases per one house. Repair work in house interior is at the highest, the next is repair work in kitchen, repair work related to restroom, repair work for housing structure improvement, and repair work for insulation in order. Third, repair work required difficult work process and high cost is tend to decrease recently. However, work changing of wallpaper and papered floor and performing in outside is tend to increase because it has simple work process and low cost. Finally, barrier free needs to be more actively reflected for the weak class in rural area.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.106-115
• /
• 2019

Recently, metal cases are widely used in smart phones for their luxurious color and texture. However, when a metal case is used, electric shock may occur during charging. Chip capacitors of various values are used to prevent the electric shock. However, chip capacitors are vulnerable to electrostatic discharge(ESD) generated by the human body, which often causes insulation breakdown during use. This breakdown can be eliminated with a high-voltage chip varistor over 340V, but when the varistor voltage is high, the capacitance is limited to about 2pF. If a chip capacitor with a high dielectric constant and a chip varistor with a high voltage can be combined, it is possible to obtain a new device capable of coping with electric shock and ESD with various capacitive values. Usually, varistors and capacitors differ in composition, which causes different shrinkage during co-firing, and therefore camber, internal crack, delamination and separation may occur after sintering. In addition, varistor characteristics may not be realized due to the diffusion of unwanted elements into the varistor during firing. Various elements are added to control shrinkage. In addition, a buffer layer is inserted in the middle of the varistor-capacitor junction to prevent diffusion during firing, thereby developing a co-fired product with desirable characteristics.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.8-14
• /
• 2019

Many electrical socket-outlet fire accidents take place not only in homes but in the offices each year. The causes are mostly faulty constructions, managerial problems and carelessness. Construction and managerial flaws can be resolved by regular or special inspections, but carelessness is not solvable through inspections. Such carelessness can be related to the consumption capacity of electrical socket-outlets presently, the rated current of electrical socket-outlets is based on 16A. However, even at 16A, the heat generated in the insulator of an electrical socket-outlet varies due to such factors as part damage and environmental conditions of use. To explore this situation, the study conducted an experiment to analyze thermal relationship by applying 10A, 20A, and 30A currents. To secure reliability, the study employed thermal analysis simulation and compared the thermal relationship in the same current value. The experimental and simulation values were found to be similar and therefore, diverse current values were replaced with the simulation. At 30A, the temperature was found to rise to at least $169.9^{\circ}C$ which had worked as a sufficient amount of energy to bring the insulation aging of insulator.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.73-79
• /
• 2022

In this study, real fire tests were performed on representative combustibles of residential facilities to analyze the fire behavior and combustion characteristics in a small residential space. The considered combustibles were a sofa, a combination of a desk and a chair, and a combination of a mattress and an electric mat. A compartment space fire test was performed using the room corner test equipment prescribed in the KS F ISO 9705 specification. Three real fire tests were conducted by placing the combustible material inside a small compartment with insulation and finishing materials and by igniting the combustible material. Results showed that the peak heat release rate and peak smoke production rate occurred in the combination of the mattress and electric mat. Furthermore, from the result of the fire rate analysis, it was estimated that the fire risk of the mattress and electric mat combination was the highest, followed by the sofa and thedesk and chair combination.

• 조명전기설비학회논문지
• /
• 제16권2호
• /
• pp.59-64
• /
• 2002

본 논문에서는 전계해석을 통하여 금속성 파티클이 GIS 스페이서의 여러 위치에 부차되었을 경우 립이 파괴전압특성에 미치는 영향을 분석하였다. 또한, 립-스페이서의 여러 위치에 금속성 파티클을 부착하고 립의 모양, 길이, 두께 등의 변화에 따라 얻은 파괴진압특성 실험결과를 전계해석의 결과와 비교·검토하였다. 전계해석의 결과 립의 연면에서의 전계집중이 다른 부분에 비하며 완화되어 절연파괴시 발생된 스트리머의 진전이 억제될 수 있다는 것을 알 수 있었으며, 실험을 통하여 파괴전압이 상승된다는 것을 확인할 수 있었다. 또한 립의 길이와 두께 등에 따라서도 파괴전압 특성이 달라짐을 알 수 있었다. 또한 립의 끝단을 라운드 처리함으로써 파괴전압 특성을 더욱 향상시킬 수 있음을 전계해석과 실험을 통하여 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.104-110
• /
• 2007

본 논문은 권선내부에 온도계가 설치된 지상변압기를 제작하여 부하운전에 따른 배전용 변압기의 온도상승 특성과 절연유의 유전특성 변화를 관찰하였다. 관찰결과 배전용변압기의 경우 과열점은 세 권선 중 두개의 권선이 접하고 권선의 약 2/3 높이에 위치하고 있으며, 과열점과 절연유 상부 간에 약 $17[^{\circ}C]$의 일정한 온도차를 확인할 수 있었다. 또한 절연유의 정전용량특성은 온도와 선형적인 관계로 감소하는 특성을 보이며, 그 기울기는 열화율과 무관하게 -0.0106의 일정한 값을 관찰할 수 있었다. 이 결과는 수명손실의 정확한 계산과 열화진단을 위한 기구로 활용할 수 있을 것이다.

• Journal of Acupuncture Research
• /
• 제21권6호
• /
• pp.233-248
• /
• 2004

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with monkshood cake, slice & black pepper cake. objectively, to be used as the quantitative data through the measurement of temperatqre, and to grasp the thermodynamic characteristics of moxibustion with monkshood cake, slice & black pepper cake. Methods : We have selected of the moxibustion with monkshood cake, slice & black pepper cake. indirect moxibustion. We make a comparative study of the thermodynamic characteristics of moxibustion with monkshood cake, slice & black pepper cake. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results & Conclusions : 1. We can design the moxibustion with monkshood cake that it has thermodynamic characteristics of 173sec effective combustion time, $44^{\circ}C$ maximum temperature, $0.22^{\circ}C/sec$ ascending maximum temperature, if we use 3mm thickness or 3mm and below of monkshood cake and the moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^3$. 2. We can design the moxibustion with monkshood cake that it has thermodynamic characteristics of 205~271sec effective combustion period time, $44.6{\sim}46.1^{\circ}C$ maximum temperature, $0.18{\sim}0.24^{\circ}C/sec$ ascending maximum temperature, if we use 3mm thickness of monkshood cake and the moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $480{\sim}720mg/cm^3$.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.105-113
• /
• 2019

본 연구에서는 원자력발전소용 비안전등급케이블 2종(보안상 A사, B사로 지칭키로 함)을 대상으로 가속열화 기간에 따른 독성 특성을 분석하였다. NES 713 시험장비 및 규격에 의거하여 비노화, 20년, 40년으로 가속열화한 케이블에 대해 피복재 및 절연재로 구분하여 시험하였다. 시험결과 20년, 40년 가속열화 케이블의 독성지수가 비노화 케이블의 독성지수보다 높았으며 A, B사 케이블 공통적으로 20년 가속열화 케이블에서의 독성지수가 높게 산출되었다. 이는 급증한 일산화탄소의 방출량과 더불어 염화수소와 브롬화수소의 할로겐계 가스 방출량이 높은 것이 주된 원인으로 파악되었다. 또한, 피복재와 절연재를 구분하여 분석 시 A, B사 케이블 일부 피복재의 독성지수가 높게 나타났다. 또한, 피복재와 절연재의 독성지수를 구체적으로 분석하고자 미국 국방성 규격인 MIL-DTL을 적용하여 독성지수 허용치 초과 여부를 판단하였으며, 이 중 절연재의 경우 상당량 초과하여 방출되는 결과를 보였다.