• 제목/요약/키워드: Instrument flight

검색결과 103건 처리시간 0.024초

중형 과학로켓을 활용한 천체 X-선 관측실험 결과 분석 (AN X-RAY EXPERIMENT WITH TWO-STAGE KOREAN SOUNDING ROCKET)

  • 남욱원;최철성
    • Journal of Astronomy and Space Sciences
    • /
    • 제15권2호
    • /
    • pp.373-389
    • /
    • 1998
  • 천문대 X-선 연구팀에서는 3년의 연구기간 동안(1995 - 1997)천체 X-선 관측시스템을 자체개발 하였다. 이 관측 시스템은 한국 항공우주연구소에서 개발된 2단 과학로켓에 탑재되어, 1998년 6월 11일 오전 10시(KST) 태안의 한 발사 장에서 발사되었다. 이 실험의 목적은 X-선 관측 시스템의 성능시험과 X-선 배경복사 관측으로 설정되었다. 로켓은 성공적으로 발사되었고, 발사 후 약 140초 동안 각종 데이터들을 지상 국으로 전송하였다. 수신된 데이터들을 분석한 결과 X-선 관측시스템은 최종 도달고도에 이르기까지 정상적으로 동작하지 못하였음을 알 수 있었다. X-선 검출기부는 발사 후 약 32초까지 그리고 신호 처리부는 발사 후 약 55.7초까지 정상적인 동작을 하였다. 이 연구에서는 55.7초까지의 데이터들을 바탕으로 X-선 관측시스템에 대한 기능점검을 수행하였으며, 이에 대한 결과를 보고하고 시스템의 오 동작 원인에 대한 토의를 하였다.

  • PDF

비행검사용 항공기를 이용한 김포국제공항 GBAS 비행시험 및 성능평가 (GBAS Flight Testing and Performance Assessment using Flight Inspection Aircraft at Gimpo International Airport)

  • 정명숙;배중원;전향식;이영재
    • 한국항공우주학회지
    • /
    • 제43권1호
    • /
    • pp.49-61
    • /
    • 2015
  • GBAS는 Differential GPS(DGPS) 개념을 활용하여 공항근처 23NM 반경 이내에 위치한 항공기에 정밀위치서비스와 정밀접근서비스를 제공하는 시스템으로, GBAS 지상장비는 공항에 설치된 이후에 지상 및 비행시험평가를 통해 그 기능 및 성능을 검증하도록 되어있다. 본 논문에서는 김포국제공항에 설치된 GBAS 지상장비에 대해 비행검사용 항공기를 이용한 비행시험 방법 및 결과를 분석하여 기술하였다. 시험 결과 김포공항의 GBAS 신호통달범위 내에서 VDB 데이터가 오류 없이 정상적으로 수신되었으며, VDB 전계강도, 보호수준, 코스정렬 정확도 등도 평가 요구조건을 충분히 만족시키는 것을 확인하였다.

Construction of an Improved Tandem Time-of-flight Mass Spectrometer for Photodissociation of Ions Generated by Matrix-assisted Laser Desorption Ionization (MALDI)

  • Moon, Jeong-Hee;Yoon, So-Hee;Kim, Myung-Soo
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권5호
    • /
    • pp.763-768
    • /
    • 2005
  • An improved tandem time-of-flight (TOF) mass spectrometer for the photodissociation (PD) study of ions generated by matrix-assisted laser desorption ionization (MALDI), MALDI-TOF-PD-TOF, has been designed and constructed. Recording a full spectrum with better than unit mass resolution even in low mass range has been achieved without reflectron voltage stepping which was needed in the previous version. Other aspects of the improvement, such as those in the data system which now allow 10-100 times faster spectral acquisition than with the previous instrument, are described. Rationale for the ideas which have led to the improvements is presented also.

공역의 구조적 변경에 따른 위험평가 절차 연구 (A study on Risk Assessment Procedure for the Structural changes of Navigable Airspaces)

  • 김도현;김웅이
    • 한국항공운항학회지
    • /
    • 제20권1호
    • /
    • pp.13-18
    • /
    • 2012
  • 'Navigable airspace' means an airspace at and above the minimum safe flight level, including airspace or flight procedures needed for safe takeoff and landing. Airspace may be established as needed and may be abolished, and in some cases may be limited to airspace management. These are absolutely based on risk assessment. Safety is the state in which the risk of harm to persons or of property damage is reduced to, and maintained at or below, an acceptable level through a continuing process of hazard identification and risk management. 'Risk' is the assessed potential for adverse consequences resulting from a hazard and 'Risk assessment' involves consideration of both the frequency and the severity of any adverse consequence. This paper proposed 'risk assessment procedure' for the structural changes of Navigable Airspaces through literature reviews relevant to manuals on airspace management and risk management.

비행고도 상에서의 우주방사선 관측 및 모델 비교 (Radiation Dose Measurement and Model Comparison at the Flight Level)

  • 이원형;김지영;장근일
    • 한국항공운항학회지
    • /
    • 제26권2호
    • /
    • pp.91-97
    • /
    • 2018
  • High-energy charged particles are comprised of galactic cosmic rays and solar energetic particles which are mainly originated from the supernova explosion, active galactic nuclei, and the Sun. These primary charged particles which have sufficient energy to penetrate the Earth's magnetic field collide with the Earth's upper atmosphere, that is $N_2$ and $O_2$, and create secondary particles and ionizing radiation. The ionizing radiation can be measured at commercial flight altitude. So it is recommended to manage radiation dose of aircrew as workers under radiation environment to protect their health and safety. However, it is hard to deploy radiation measurement instrument to commercial aircrafts and monitor radiation dose continuously. So the numerical model calculation is performed to assess radiation exposure at flight altitude. In this paper, we present comparison result between measurement data recorded on several flights and estimation data calculated using model and examine the characteristics of the radiation environment in the atmosphere.

THE EFFECT OF ATMOSPHERIC SCATTERING AS INFERRED FROM THE ROCKET-BORNE UV RADIOMETER MEASUREMENTS

  • Kim, Jhoon
    • Journal of Astronomy and Space Sciences
    • /
    • 제14권1호
    • /
    • pp.87-93
    • /
    • 1997
  • Radiometers in UV and visible wavelengths were onboard the Korean Sounding Rocket(KSR)-1 and 2 which were launched on June 4th and September 1st, 1993. These radiometers were designed to capture the solar radiation during the ascending period of the rocket flight. The purpose of the instrument was to measure the vertical profiles of stratospheric ozone densities. Since the instrument measured the solar radiation from the ground to its apogee, it is possible to investigate the altitude variation of the measured intensity and to estimate the effect of atmospheric scattering by comparing the UV and visible intensity. The visible channel was a reference because the 450-nm wavelength is in the atmospheric window region, where the solar radiation is transmitted through the atmosphere without being absorbed by other atmospheric gases. The use of 450-nm channel intensity as a reference should be limited to the altitude ranges above the certain altitudes, say 20 to 25km where the signals are not perturbed by atmospheric scattering effects.

  • PDF

항공기 강하 성능과 FMS 강하 정보에 기반한 표준계기도착절차와 계기접근절차의 운항 효율성 향상에 관한 연구 (A Study for Enhancing Efficiency of STAR and IAP for the Prospect of Aircraft Descent Performance and FMS Descent Guidance Information)

  • 이충섭;이현진;백호종;박장훈
    • 한국항공운항학회지
    • /
    • 제31권1호
    • /
    • pp.79-91
    • /
    • 2023
  • In response to the recent surge in aviation demand, major airports and aviation authorities continue to make efforts to formulate arrival and approach procedures that take into account efficient aircraft separation, noise and environmental issues of carbon (CO2) emissions. In order to ensure efficient traffic control and environmental issues, as a result, a new concept Trombone, Point Merge, etc. have been introduced and widely used in the domestic airspace. However, these new concept procedures which do not properly reflect the characteristics of the aircraft operation performance and the FMS vertical descent guidance hinder flight efficiency as well as bring in turn negative factors such as level-off flight and the use of drag device at the busiest phase of the flight descent operation, like the Continuous Descent Operation (CDO). Accordingly, throughout modification the current Standard Terminal Arrival Route (STAR) and Instrument Approach Procedure(IAP) that reflect the aircraft descent performance and the FMS guidance, the flight operation safety and efficiency is expected to be improved eventually. We herewith analyze and propose the way of improving flight efficiency in the arrival operation procedure by supplementary modification which consequently contribute to the aviation industry international competitiveness.

모델기반 자동코드 생성과 실시간 운영체제 기반 무인기용 비행제어시스템 탑재 프로그램 개발 (Development of Embedded Program for UAV Flight Control System using RTOS and Model-Based Auto Code Generation)

  • 김성환;조상욱;김성수;유창경;최기영
    • 한국항공우주학회지
    • /
    • 제39권10호
    • /
    • pp.979-986
    • /
    • 2011
  • 본 논문에서는 소형 무인기용 센서 및 임무장비 통합형 비행제어 시스템의 탑재 프로그램 개발에 대해 다룬다. 비행제어 시스템은 센서 및 임무장비를 관장하는 장치관리시스템과 제어 프로그램 및 임무 수행 알고리즘을 연산하는 제어연산시스템의 두 부분으로 구성된다. 장치관리시스템의 탑재 프로그램은 TI사의 DSP/BIOS 실시간 운영체제를 기반으로 개별 센서 및 외부 임무장비를 위한 시스템 드라이버들과 각각의 서브시스템 관리를 위한 태스크들로 구성된다. 제어연산시스템의 프로그램은 모델기반 개발기술을 이용한 자동 코드 생성 기술을 적용하였다.

T-103 훈련기의 환기와 난방 시스템 개선에 관한 연구 (A Design and Application of the Ventilating and Heating System of T-103 Trainer Aircraft for Improvement)

  • 정대한
    • 한국군사과학기술학회지
    • /
    • 제16권3호
    • /
    • pp.277-284
    • /
    • 2013
  • In this paper, the ventilating and heating system of T-103 trainer aircraft were investigated and redesigned to improve its poor performance. The ventilation system of the trainer was designed to increase the mass flow rate of fresh air by using air intake valves. The flow-in air through the air intake valve is supplied to the cabin by the ram effect of aircraft and the propeller. And the additional heating system was installed to improve the temperature of the cabin inside. The wasted heat from the exhaust gas of the engines was used as heat source of the additional heating system by installing an heat exchanger around the exhaust nozzle. The additional fresh air and the heated air enter the cabin via two ducts mounted under the instrument panel and behind the pedal in the cabin. The additional ventilating and heating system can be controlled by the first pilot and the secondary pilot individually using the control knob equipped separately. After mounting the additional ventilating and heating system, evaluations such as inspection of parts and component, ground run-up test, in-flight test, user test, etc. were conducted. The result of the tests was sufficient to meet the requirements of the manuals, and the pilots were satisfied with the additionally mounted systems.

비행 운동 시뮬레이션을 위한 좌표계 변환 (The Coordinate Conversion for Flight Dynamics Simulation)

  • 백중환;황수찬;김칠영
    • 한국항행학회논문지
    • /
    • 제3권2호
    • /
    • pp.139-146
    • /
    • 1999
  • 비행 시뮬레이터는 엔진 모듈, 항법장치 모듈, 계기 모듈로 구성된다. 여기에는 두 가지의 문제점을 가지고 있다. 첫째는, 각 모듈별로 사용하는 좌표계가 서로 다르다는 점이다. 이를 해결하기 위해 본 논문에서는 각기 독자적인 좌표계를 일치시키기 위한 방법을 고안하였다. 둘째는, 지구 형태가 완전한 구 모양을 따르고 있다고 가정하고 구 삼각공식을 이용하여 거리와 방위각을 계산하게 되면 많은 연산량이 요구된다. 본 논문애서는 근거리 비행시 구 삼각공식 대신 평면 근사화 방식을 사용함으로써 우수한 결과를 얻음을 확인하였다. 연산 속도는 구 삼각공식 사용시 $4.95{\times}10^{-4}$초에서 평면 근사화 방식을 사용시 $1.648{\times}10^{-4}$초로 향상됨을 확인하였다.

  • PDF