• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.83-94
• /
• 2013

The purpose of this study is to offer basic data about prototype conservation of the Orijangnim, natural monument No. 404. For this study, March to August 2010, was a literature surveys and field research, and based on this, the Delphi survey of local residents and experts meeting were diagnosed with forest back ground, spatial extent, in the form of forests, flora and vegetation of the surrounding area, so examined closely the original form. Range of the Orijangnim was presumed from Jacheon middle school entrance($N36^{\circ}05^{\prime}59.9^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.9^{{\prime}{\prime}}$) to Odong of Hwabukmyeon village entrance($N36^{\circ}05^{\prime}31.0^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.5^{{\prime}{\prime}}$). The Orijangnim in the original form of the existing forest surrounding the village along gohyeon river going back a long S-shaped about 2km is considered. The investigated vascular plants consist of total 198 taxa : 2 forms, 20 varieties, 179 species, 152 Genera, 72 Families. Most of the 60 kinds of large land plants lots of whole plants accounted for 33.3%. A main vegetation of the Orijangnim have been distributed 473 objects of 21 species, and evergreen conifers is 19% to 92 objects, on the other hand, deciduous broadleaf tree is 79% to 373 objects, so the Orijangnim can be maxed forest that deciduous broadleaf tree is dominant. When consider the composition purpose of forest, environment of location, tree size, surrounding flora and vegetation, because an original vegetation of Orijangnim is suggested Zelkova serrata, Salix glandulosa, Celtis sinensis Pers., Quercus variabilis, Quercus acutissima , Sophora japonica L., Cornus walteri Wanger. we must restore around such species of tree. Cedrus deodara (Roxb.) Loudon, Chaenomeles sinensis, Prunus yedoensis Matsum., Ginkgo biloba , Pinus thunbergii Parl., Populus tomentiglandulosa T. Lee is considered to have been planted in the last.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.26-37
• /
• 2015

This paper aims to review all landscaping elements of Donggwoldo by building and identify the palatial garden landscaping characteristics and landscaping methods in a bid to explore landscaping methods applicable for modern-time gardens of Korea through Succession of Tradition. The research methodology was adopted by which the palatial gardens appearing in Donggwoldo were observed according to garden elements to identify their characteristics. Garden elements in Donggwoldo include oddly shaped stones, ponds, buildings and Madang, borders and areas, and trees. Their characteristics were analyzed, and as a result they are outlined as follows. Location : Buildings in Donggwoldo were located in the optimal areas within the Myungdang (the best location), with the building sites being created by transforming the natural topography positively according to the existing topography and uses. Tree planting : The construction of the buildings involved using the existing trees. There were no specific principle and method of planting trees, and no specific criteria for choosing the kind of tree. Symmetrical planting was adopted and its is considered embracing the viewpoint of making gardens based on the expression of Yin and Yang. Strongly symbolical kinds of trees were also adopted. Bangji : it takes a nearly circular shape in palatial gardens, and such shapes represent conceptual and abstract symbols. They were also frequently used as the place of public entertainment. Pavilions : they did not take a certain standard shape. They had diverse shapes, including a triangle, square, pentagon, hexagon, and octagon and cross. Oddly shaped stones : Oddly shapes stones and stone cases were deployed mainly near the bedroom and the crow prince's residence and in the rear garden. Hwagye : it appeared mainly in the back of the bedroom, the crown prince's residence, the princess's residence, and other women's quarters. Chwibyeong : it was installed for the purpose of drawing the natural energy like a natural inlet instead of being the nature-dividing wall. Korea's garden composition method was very different from the Western and Chinese method. Overall, Chosun palatial garden style was characterized by strict and Confucian features, while the garden construction method adopted the Taoism thought. Yet, the gardens had a carefree aspect.

• Analytical Science and Technology
• /
• v.32 no.6
• /
• pp.243-251
• /
• 2019

Microplastics (MP) are found in large quantities in the oceans, posing a major threat to the ecosystem. In Korea, MPs have been reported to be detected in sea salts. In order to analyze MPs, information on their composition, size, and shape is required. FT-IR microscopy is used frequently to measure sizes larger than 20 ㎛. Recently, however, Raman microscopy, which can analyze ultrafine plastics below 20 ㎛, has been applied extensively. In this study, 10.0 g samples of commercially available salts were dissolved and filtered through a 45 ㎛ mesh filter with a size of 25.4 mm × 25.4 mm. These filtered samples were then analyzed by both FT-IR microscopy and Raman microscopy. A total of four MPs, including three polyethylene (PE) of size 70-100 ㎛ and a polypropylene (PP) of size 170 ㎛, were detected by FT-IR microscopy, while 10 MPs, including nine PE of size 10-120 ㎛ and one polystyrene (PS) of size 40 ㎛, were detected by Raman microscopy. Approximately, 1,000 MPs/kg was estimated, which was almost two times higher than the previous reported levels (~550-681 particles/kg in sea salts); this is because Raman microscopy can detect much smaller MPs than FT-IR microscopy. A total of 113 particles were found using Raman microscopy: Carbon (35, 31.5 %), minerals (28, 25 %), and glass (16, 14.4 %) were dominant, forming around 70% of the total, but MPs (10, 8.8 %) and cellulose (5, 4.5 %) were also found. Raman microscopy has great potential as an accurate method for measuring MPs, as it can measure smaller size MPs than FT-IR microscopy. It also has a reduced sample preparation time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8836-8843
• /
• 2015

This study was performed to investigate the antiproliferative activities of supercritical extracts from phalsak(Citrus hassaku Hort ex Tanaka) and yeagam(Citrus iyo Hort. ex Tanaka) against human cervical carcinoma HeLa cells and the chemical compositions of the extracts. The anticancer properties of supercritical extracts were demonstrated using the MTT assay and Hoechst 33342 staining and the compositional analyses were conducted by using gas chromatography-mass spectrometry(GC-MS). The peel extracts of both species exhibited similar antiproliferative effect. The antiproliferative activity of the flesh extracts was not detected up to $400{\mu}g/mL$, whereas peel extracts of phalsak and yeagam reduced cell viability with 87.16% and 92.95% at $400{\mu}g/mL$, respectively. There was a dramatic increase of the apoptotic body formation in the cell treated with peel extracts while no apoptotic body formation detected in the cell treated with flesh extracts at 100, $200{\mu}g/mL$. By GC-MS analysis, 27 and 31 kinds of compounds identified in flesh and peel of phalsak, while 27 and 29 kinds of compounds were identified in flesh and peel of yeagam, respectively. 1,1,4,4-Tetramethyl-2-tetralone(20.86%), alloimperatorin(8.15%), limonene(11.23%), and auraptene(7.29%) were major in peel of phalsak, whereas limonene(22.19%), linalool(11.23%), and ${\gamma}$-sitosterol(9.12%) were major in peel of yeagam.

• Journal of Animal Environmental Science
• /
• v.13 no.2
• /
• pp.129-138
• /
• 2007

A natural deodorizing agent (NDA) was made using pine cone byproduct, and its effects on malodor emission and composting were analyzed in this study. NDA was manufactured by mixing pine cone byproduct with three species of microorganisms and water containing mineral nutrients and molasses, and then by incubating for 48 hours at $30^{\circ}C$. Lab scale experiments were done with three treatment groups, T1 (control, sawdust treatment), T2 (microorganisms and sawdust treatment group), and T3 (NDA and sawdust treatment group). During composting, temperatures reached over $55^{\circ}C$, a minimum temperature for the inactivation of pathogenic microorganisms. No differences were found in physicochemical composition of compost among treatments. However, it was observed that over usage of NDA could obstruct temperature increase, since the biodegradation rate of organic matter of NDA was relatively low, Nitrogen loss due to ammonia gas emission, which normally happens during composting, was reduced by using NDA, and hence the nitrogen level of final compost was higher in T3 than in others. During experiment, it was found that ammonia gas emission was entirely lasted through compositing duration, but the $CH_3SH$ and $H_2S$ gases were produced only at early stage of composting. The ammonia concentration trapped in $H_2SO_4$ solution during 31 days of composting in T1, T2 and T3 was 12,660mg/L, 11,598mg/L and 7,367mg/L, respectively, showing distinguishable reduction of ammonia gas emission in T3. The emissions of $CH_3SH$ and $H_2S$ gases were also remarkably reduced in T3. Based on these obtained results, usage of the deodorizing agent made with pine cone byproduct could reduce the emission of malodor during composting, without any deterioration of compost quality.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.522-528
• /
• 2005

Effects of packaging and storage temperature on the quality and shelf life of mungbean sprouts(vigna radiata (L.) Wilczek) were studied Mungbean sprouts were packaged in polypropylene films(PP) and oriented polypropylene films(OPP) with 200 g, 250 g, and 300 g and stored at $4^{\circ}C,\;8^{\circ}C$ and $12^{\circ}C$, respectively. The deterioration of quality of mungbean sprouts during storage was caused by wilting of hypocotyl, abscission of cotyledon and softening of tissue. Total weight loss never exceeded $1\%$ and no visible signs of shrivelling of mungbean sprouts were observed. At $4^{\circ}C,\;30{\mu}m$ of OPP film per 250 g mungbean sprouts provided the optimal atmosphere composition(i.e. $3\%\;\O_2\;and\;5\%\;CO_2$). A shelf life of 6 days was achieved with these conditions. Hardness of hypocotyl, when deterioration in freshness began, was about 1,027.2 g when considerably deteriorated Hunter b value was 13 in deteriorated hypocotyl, vs. 11 for hypocotyl of fresh mungbean sprouts was accelerated by fluctuating storage temperature by the increment of storage time. It also was found that the optimum shelf life period was estimated to be 6, 2 and 2 days for 4, 8 and $12^{\circ}C$, respectively.

• Journal of Mushroom
• /
• v.13 no.1
• /
• pp.56-62
• /
• 2015

A lipase producing bacterium was isolated from button mushroom bed, which showing high clear zone on agar media containing Tributyrin as the substrate. The strain was identified as Burkholderia cepacia by analysis of 16S rDNA gene sequence. Crude lipase (CL) was partially purified from 70% ammonium sulfate precipitation using the culture filtrate of B. cepacia. Immobilized lipases were prepared by cross-linking method with CL from B. cepacia and Novozyme lipase (NL) onto silanized Silica-gel as support. Residual activitiy of the immobilized CL (ICL) and immobilized NL (INL) was maintained upto 61% and 72%, respectively. Biodiesel (Fatty acid methyl ester, FAME) was recovered by transesterification and methanolysis of Canola oil using NaOH, CL and ICL as the catalysts to compare the composition of fatty acids and the yield of FAME. Total FAME content was NaOH $781mg\;L^{-1}$, CL $681mg\;L^{-1}$ and ICL $596mg\;L^{-1}$, in which the highest levels of FAME was observed to 50% oleic acid (C18:1) and 22% stearic acid (C18:0). In addition, the unsaturated FAME (C18:1, C18:2) decreased, while saturated FAME (C16:0, C18:0) increased according to increasing the reaction times with both CL and ICL, supporting CL possess both transesterification and interesterification activity. When reusability of ICL and INL was estimated by using the continuous reaction of 4 cycles, the activity of ICL and INL was respectively maintained 66% and 79% until the fourth reaction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.125-132
• /
• 2006

The below is the results of physicochemical analysis of 40 breeding lines of colored barley (CB) whose systems are different Water content of CB No. 24 showed the lowest value of 7.4% while CB No. 9 showed the highest value of 10.8%. Crude protein of CB $9.7{\sim}12.9%$ range was found. Crude fat content of CB No. 6 showed the highest value of 4.35% while CB No. 34 showed the lowest of 1.35%. Crude ash content of CB No. 31 showed the lowest value of 1.20%. Ca content of CB No. 10 showed the highest value of 717.50 mg% while general barley showed the lowest value of 442.82 mg%. Mg content of CB No. 10 showed the highest value of 1320.00 mg%. Cu content of CB No. 20 showed the lowest value of 2.20 mg% while CB No. 33 showed the highest value of 6.25 mg%. K content of CB No. 20 showed the lowest value of 723.24 mg% while CB No. 1 showed the highest value of 1002.50 mg%. Mn content of CB No. 28 showed the lowest value of 31.72 mg% while general barley showed the highest value of 94.56 mg%. ${\beta}-Glucan$ content of CB No. 25 showed the lowest value of 5.20 mg% while CB No. 28 showed the highest value of 4.46 mg%.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.327-339
• /
• 1989

Cassiterite, tantalite, columbite and tantalian rutile are found as accessory minerals in Soonkyoung tin-bearing pegmatites. These minerals occur as finely disseminated specks of up to micro-size in diameter and coarse grain size varying from 0.5-50mm in albite, muscovite and quartz assemblage. Cassiterite geneally shows a moderate to intense pleochroism, having a color brownish yellow to deep reddish brown. The substitution of $Ta^{+5}$, $Nb^{+5}$, $Ti^{+4}$ and Fe* for $Sn^{+4}$ in cassiterite ranges 0.01-0.10 mol%. The zoned cassiterite give a higher Ta/Nb ratios in margin than the ratios in core. This is due to the preferential $Ta^{+5}$ affinity to lower temperature during the crystallization of cassiterite. Tantalite-columbite and tantalian rutile occur in cassitertie with exsolution texture and/or infiltrate into the micro-fissures of cassiterite with micro quartz vein. The compositions of tantalite-columbite show the wide ranges of $Ta_2O_5$ : 14-46 wt.%, $Nb_2O_5$ : 60-28 wt. % and FeO*: 10.15 wt.%. The variation of chemical composition in tantalit-columbite exhibits the decreasing trends of $Mn^{+2}/M^{+2}+Fe^*$ with $Ta^{+5}/Ta^{+5}+Nb^{+5}$ increasing. These trends of vatiations indicate that the Ta/Nb fractionation are enhanced by higher Ta-complex activity in late stage of pegmatite consolidation and lower activity of F in agreements with the F-and Li-micas not to be developed in Soonkyoung tin-bearing pegmatite.