• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.367-370
• /
• 2008

In this paper, the effects of the position and the angle of the auxiliary probes on the measurements of the low frequency ground impedance with the fall-of-potential method are described iud the testing techniques to minimize the measuring errors are proposed. The fall-of-pot ential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position and angle of auxiliary probes. In order to analyze the characteristics of ground impedance due to the location of the potential probe, ground impedances were measured in case that the distance of current probe was fixed at 50[m] and the distance of potential probe was located from 10[m] to 50[m]. Also, the potential robe was located at 30[$^{\circ}$], 40[$^{\circ}$], 60[$^{\circ}$], 90[$^{\circ}$], and 180[$^{\circ}$]. The results could be help to determine the location of potential probe when the ground impedance was measured at grounding system.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.551-564
• /
• 2020

High-stress and complex geological conditions impose great challenges to maintain excavation stability during deep underground mining. In this research, large anisotropic deformation and its management by support system at a deep underground mine in Western Australia were simulated through three-dimensional finite-difference model. The ubiquitous-joint model was used and calibrated in FLAC3D to reproduce the deformation and failure characteristics of the excavation based on the field monitoring results. After modeling verification, the roles of mining depth also the intercept angle between excavation axis and foliation orientation on the deformation and damage were studied. Based on the results, quantitative relationships between key factors and damage classifications were presented, which can be used as an engineering tool. Subsequently, the performance of support system installation sequences was simulated and compared at four different scenarios. The results show that, first surface support and then reinforcement installation can obtain a better controlling effect. Finally, the influence of bolt spacing and ring spacing were also discussed. The outcomes obtained in this research may play a meaningful reference for facing the challenges in thin-bedded or foliated ground conditions.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.21-29
• /
• 2016

In this paper, optical tracking and analysis was carried out to find the optical properties with respect to various geometric design parameters of collimator lens which is very efficient when collect the light. As a result, a whole, ellipse incident part can obtain a high light efficiency and a narrow beam angle, and angled cylinder incident part is confirmed to obtain high efficiency and a narrow beam angle at a certain height or more. When Transmission part have a specific surface which can reflect the light in forward direction, a good optical properties was confirmed.

• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.254-260
• /
• 2023

A sensor system has been developed that uses an ultrasonic sensor to detect the downhill slope on the side of a forest road and prevents a vehicle-type forest machine from rolling down a mountainside. A specular reflection of ultrasonic wave might cause severe issues in measuring distances to targets. By investigating the installation angle of the sensor to minimize the negative effects of specular reflection, the installation angle of lateral monitoring ultrasonic sensor could be determined based on the width of road shoulder. Obstacles such as small rocks or piece of log in a forest road may cause the forest machine to be overturned while the machine riding over due to excessive its posture change. It was determined that the laser sensor could be a part of a sensor system capable of specifying the location and size of small obstacles. Not only this sensor system including ultrasonic and laser sensors can issue a warning of dangerous sections to drivers in forest forwarders currently in use, but also it can be used as a driving safety sensor in autonomous forest machine or remote-control forest machine in the future.

• 한국지반공학회지:지반
• /
• 제11권2호
• /
• pp.29-36
• /
• 1995

본 연구에서는 여러 가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형토조에 설치하고 레이닝(raining)방법으로 지반을 조성한 다음 재하시험을 하여 그물식 뿌리말뚝의 타설경사각과 극한지지력 사이의 관계를 비교분석 하였다. 모형말뚝은 0$^{\circ}$, $10^{\circ}$, 15$^{\circ}$, 20$^{\circ}$의 타설경 사각을 갖는 직경 5m의 강봉에 모래를 입힌 것으로 직경이 6.5mm, 길이가 300mm가 되도록 하였다. 그리고, 모형 원형 얕은기초를 제작하여 재하시험을 수행한 다음 극한지지력을 구해 부리말뚝의 극한지지력과 비교하였다. 실험결과 타설경사각이 15$^{\circ}$일때 극한지지력이 최대가 되었다. 타설경사각이 15$^{\circ}$인 뿌리말뚝의 극한지지력은 원형 얕은기초의 극한지지력과 비교하면 2.2배이고, 연직으로 타설된 뿌리말뚝의 경우와 비교하면 22%의 극한지지력 증가효과가 있었다. 반면에 타설경사각이 20$^{\circ}$인 경우의 극한지지력은 연직 뿌리말뚝의 극한지지력보다 5% 감소된 값을 가짐을 알 수 있었다. 하중-침하 량곡선은 타설경사각이 없는 경우에 전반전단파괴 형태를 나타내며, 타설경사각이 $10^{\circ}$인 경우, 하중은 극한지지력에 도달한 후 일정한 값을 유지하는 양상을 보인다. 타설경사각이 15$^{\circ}$, 20$^{\circ}$로 증가하면서 하중은 극한지지력에 도달한 후에도 계속 증가하는 경향이 있다. 따라서, 타설경사각이 있는 경우의 뿌리말뚝은, 극한지지력을 초과하여 하중을 받더라도 급격한 파괴에 이르지 않고 점차로 변위가 증가하는 연성 (ductile)거동을 보일 것으로 예상된다.라이스토세와 홀로세까지 큰 변화없이 식물상과 식생이 지속적으로 명맥이 유지되고 번성하였다, 이는 한 반도가 여러 차례가 기후 변화에 따라 식생대의 이동은 있었으나 식물상의 멸종을 가져올 정도의 환경적 격변을 겪지 않고 비교적 안정적인 환경이 장기간 지속되었음을 의미한다. 아울러 기후가 변화할 때마다 식물들리 서식, 생존할수 있는 다양한 피난처가 한반도의 도 처에 산재되어 있었음을 뜻한다,.sening trend)을 나타낸다. 이러한 퇴적상 변화는 저조선에 서 만조선으로의 조간대 지형과 주조수로의 지형.수력학적 특성이 다음과 같기 때문이다. a) a general decrease in width b) a general decrease in depth c) a general decrease in maximum and average current velocities d) a general increase in contents of suspended mud e) a general decrease in grain size of the bottom sand and an increasing abundance of muddy deposits. 우리나라 서해안 조간대 퇴적층(체)의 수직 층서(vertical stratigraphy)는 지난 3여년동안의 수십개의 vibracoring(주상시추)에 의하여 매우 흥미롭고 중요하게 밝혀지고 있는바 이것은 현세(Holocene)와 선현세(preHolocene: 11000 years BP)의 오랜시간 경과에 따른 조수환경 변화의 수직퇴적 과정과 기후 해수면 변화의 현상에 원인이 있다고 해석된다.(박용안 외, 1992-1995)결과적으로 서해안 조수퇴적체(층)의 분지주변(basim margin)진화과정이 밝혀지 고 있다.confusely in the middle of 19th century.rds of foreign origin

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.284-288
• /
• 2005

This paper proposes the direct detection method of phase angle for the power source, which is based on the PLL method. The proposed method using a bidirectional photo-coupler is used to directly detect the zero crossing of phase voltage and calculate the angular frequency in the controller based on a M/T algorithm. Through the method, the additional installation space in the traditional method using a potential transformer can be minimized and it can be easy to design. The paper presents straightforward schematic circuits, design and experimental results.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.208-213
• /
• 2008

Since The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing solar flat-plate collectors. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal system is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal solar flat-plate collectors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.402-406
• /
• 2000

In the Over-The-Range, the outlet size is limited by the industrial standards. Therefor to enlarge the volume of cavity, the installation height of ventilation fan is become small, the system resistance is higher than before. For that reason, the important design variables such as the diameter of a fan, the scroll expansion angle, etc. which play the significant role on flow rate and noise, are confined. In this study, we made an experiment of the diameter of fans relation to scroll expansion angle and investigated flow rate of the length of fans in enlarged cavity volume of OTR, and then we designed the new scroll to improve the flow rate and noise level. As a result, flow rate increased to 110% compared to current scroll and the blade passing frequency of a fan is disappeared by inclined cut-off shapes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.252-253
• /
• 2013

In this paper, we introduce the insulation of aluminum truss dry installation method for construction for the development of the Angle. Features of the development of anchor bolts have been identified as no risk of fire, and ease of construction, which has the advantage of being the adiabatic efficiency is increased. In future research, to study the angle of the field on the Application of the development for the construction.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.335-341
• /
• 2011

This paper presents an improved orientation strategy for energy-efficiency in photovoltaic (PV) panels. Conventionally, PV panels are tilted with the site's latitude angle or the difference between the latitude angle and the solar declination angle. A monthly-based orientation strategy has been proposed and analyzed in this study. The proposed strategy implies that the PV panels are tilted with the monthly-based angle that achieves the maximum incident radiation. Furthermore, the impact of using the proposed orientation strategy and three conventional strategies on the produced power and on the PV system design features has been investigated in detail. A Japanese city (Fukuoka) and an Egyptian city (Al-Kharijah) have been considered as locations for the PV power system installation. The results showed that the proposed strategy achieved an increase in the power produced from the PV power systems at the two different sites, and consequently the required solar cells area can be saved. Therefore, the cost of the PV power system components can be reduced including the solar cells area and the land area.