• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.70-78
• /
• 2011

The paper aims at developing a more reliable and accurate BWIM(Bridge Weigh-In-Motion) algorithm using measured strain data and examining its efficiency with various tests on bridges. It proposes a BWIM algorithm using density estimation function and average modification factor for moment-strain relationship. Density estimation function has been proved to be reliably applied when multiple axle loads are estimated. An average modification factor is applied to minimize overall error that can be encountered between theoretically computed moments and measured strains at multiple locations in a bridge. The developed algorithm has been successfully examined through numerical simulations, laboratory tests, and also by field tests on a multi-girder composite bridge.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.179-191
• /
• 2002

This paper presents a systematic approach to the seismic nonlinear analysis and retrofit strategies for existing bridges with isolation system using retrofit slate function newly proposed in this study. A seismic retrofit scheme using sliding base isolation system was presented to reduce the seismic hazard for bridge structures. In this study, two types of isolation systems such as lead bearings and sliding isolators were used. The behavior of sliding isolators was modeled by a triaxial interaction model. And three types of earthquakes such as El Centro, San Fernando, and the artificial were used as earthquake ground excitations. Seismic response analyses of the bridge before and after retrofit were effectively carried out by using a three-dimensional nonlinear seismic analysis program, IDARC-Bridge. Also, this paper proposes a retrofit state function for easily representing the efficiency of a retrofit scheme.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.799-804
• /
• 2000

The joint treatment of concrete is one of the technical problems in top down construction method. Joints created wit the top down construction result in serous weakness from the aspects of both structural and water-barrier function. Several case studies for the insepction of top down construction joints of column in SRC structure using radar and infrared thermography method. The advantages and limitations of these methods for non-destructive inspection in top own construction joints are investigated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.811-816
• /
• 2000

The joint treatment of concrete is one of the technical problems in top down construction method. Joints created with the top down construction result in serious weakness from the aspects of both structural and water-barrier function. Ultrasonic method was used for the inspection of top down construction joints of column in SRC structure in this study. As a result it has been verified that the semi-direct measurement method is more effective than the other methods for detecting the voids of construction joints.

• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.358-365
• /
• 1995

This paper presents another system of multi-level skip-lot sampling plan, which can directly retum to normal inspection from any skpping inspection level when a sudden shift for the worse in the process mean occurs. All the other properties of the proposed sampling plan are similar to those of the Choi's(1993) plan. The formula of the poerating characteristic function for the proposed n-level skip-lot sampling plan is derived. Sone poerating characteristic properties for the proposed plan are graphically compared with those of the Choi's plan.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.199-201
• /
• 2010

본 논문에서는 광케이블과 소형렌즈를 검사하기 위한 고해상력 투영검사기를 개발하였다. 개발된 고해상력 투영검사기는 30V/7A 전원장치에서 할로겐램프를 연결하여 원격장치로 램프의 밝기를 조절한다. 개발된 고해상력투영검사기는 관련기술을 확보하였고 수입대체효과를 가져올 수 있다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.135-143
• /
• 2000

The vision system is easy to use the exclusive use as a independent computer system but it is not much popularization by reason of expensive and difficult to adapt to the various fields, because it is easy to the existed computer system, the price is cheap and also it can use to the various measurement purpose which user wanted and programed. The measurement method of the vehicle axle casing nut welding part is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual length of the standard specimen and the length of image, to measure the ratio between the actual product and the camera image. A defect is found by the assembled visual inspection system. The inspection algorithm which estimates the quality of welded product is developed and also, the software program which processes the automatic test function of the inspection system. We make the foundation of the inspection automatic system and we will help to apply other welding machine.

• Korean Journal of Veterinary Research
• /
• v.52 no.1
• /
• pp.9-18
• /
• 2012

Rabies is a major zoonotic disease that causes approximately 55,000 human deaths worldwide on an annual basis. The nucleocapsid protein and glycoprotein genes of the Korean rabies virus (RABV) have been subjected to molecular and phylogenetic analyses. Although the phosphoprotein (P) has several important functions in viral infection and pathogenicity, the genetic characterizations of the P of Korean RABV isolates have not yet been established. In the present study, we conducted genetic analyses of P genes of 24 RABV isolates circulating in the Republic of Korea (hereafter, Korea) from 2008 to 2011. This study revealed that the P genes of Korean RABVs are genetically similar to those of RABV strains of lyssavirus genotype I including V739 (dogs, Korea), NNV-RAB-H (humans, India), NeiMeng925 (raccoon dogs, China), and RU9.RD (raccoon dogs, Russia). Among Korean isolates, the RABV P genes showed low variability in the variable domains among Korean isolates; they had specific consensus sequences and amino acid substitutions capable of identifying geographic characteristics and retained specific sequences thought to be important for viral function. These results provide important genetic characteristics and epidemiological information pertaining to the P gene of the Korean RABV.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.92-99
• /
• 1999

The inspection unit which is developed and used in this study, is processed the shape data from the CCD camera to seek welding bite section shape, and then calculated as a real dimension from measuring the value of each inspection item. The reason of measuring with the real in this study is came out from the image method which used for a long time, which is extricated the characteristic as the dimension of pixel by recognize pixel. The measurement method of the section shape is that we decide the thresholding value after we drew the histogram to binarizate the object. After that, we make flat the object to get rid of the noise and measure the shape of welded part through the boundarization of the object. The shape measurement is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual dimension of the standard specimen and the dimension of image, to measure the ratio between the actual product and the camera image. The inspection algorithm which estimates the quality of welded product is developed and also, the software GUI(Graphic User Interface) which processes the automatic test function of the inspection system is developed. We make the foundation of the inspection automatic system and we will help to apply other welding machine.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.916-921
• /
• 2009

The technology to inspect and measure an inner structure of micro parts has become an important tool in the semi-conductor industrial field with the development of automation and precision manufacturing. Especially, the inspection skill on the inside of highly integrated electronic device becomes a key role in detecting defects of a completely assembled product. X-ray inspection technology has been focused as a main method to inspect the inside structure. However, there has been insufficient research done on the customized inspection technology for the flip-chip assembly due to the interior connecting part of flip chip which connects the die and PCB electrically through balls positioned on the die. In this study, therefore, it is implemented to detect shape error of flip chip bonding without damaging chips using an x-ray inspection system. At this time, it is able to monitor the solder bump shape by introducing an edge-extracting algorithm (exponential approximation function) according to the attenuating characteristic and detect shape error compared with CAD data. Additionally, the bonding error of solder bumps is automatically detectable by acquiring numerical size information at the extracted solder bump edges.