• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.257-263
• /
• 2018

본 연구는 트랜스미션에 들어가는 부품인 차동기어에 대한 자동 검사 장비를 개발하고자 하는 것이다. 본 기술개발은 Micro Vision 자동 검사 장비와 마이크로레이저 자동 검사 장비를 사용하여 만들 것이다. 이는 작업자가 부주의하게 가공한 제품을 전수검사 단계에서 불량률 0를 만들고자 한다. 본 연구를 통해 개발된 장비를 여러 분야 사업에 적용할 것이다. 포장회사, 너트 볼트 가공업체, 정밀 반도체 상단에 인쇄를 위한 업체, SMT 업체 등 다양한 분야에 비전검사 장비를 판매하고자 한다. 본 기술개발을 통해 불량률 0를 실현하면 모기업으로부터 안정적 물량 확보, 나아가 제품 신뢰도를 바탕으로 수출을 할 수 있는 기반마련의 기회도 가능하다. 자동검사시스템을 국내 자동차 부품 가공업체에 적용할 경우 우리나라 자동차의 신뢰도 또한 크게 상승 할 것으로 생각된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.133.6-133
• /
• 2001

Reactor vessel is one of the most important equipment of Nuclear Power Plant (NPP) with regard to the nuclear safety. Thus reactor vessel must be examined periodically by certified experts. Currently, ultra-sonic(UT) non-destructive inspection is executed on reactor vessel. Two different techniques are used in this inspection. One is using the movable manipulator fixed with the support-guide placed on the vessel, and the other is using mobile robot moving in the vessel. Movable manipulator machine is very heavy, hard to handle, and very expensive. Mobile robot equipment is small and convenient but has a weak point on positional precision. To solve these problems we developed a reactor inspection system based on laser-driven mobile robot. This paper describes the main concept and structure of integrated inspection units and the feature of implemented units.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1869-1873
• /
• 2010

For reliable operation of oil-filled electrical equipment, monitoring and maintenance of insulating oil is essential. Dissolved gas analysis(DGA) is widely used for monitoring faults in high voltage electrical equipment in service. Therefore, oil analysis should be monitored regularly during its service life. KEPCO has investigated thousands of dissolved gas analysis data since 1985, and conducted studies on the relationship of gas in oil analysis and internal inspection results of transformer. As the results, KEPCO revised criteria for transformer diagnosis and has applied it since 2008. Almost of 100 cases of internal inspection results since 2001 have been investigated. This paper presents the correlation of the fault-identifying gases with faults found in actual transformers and how should we approach to internal inspection of transformer by dissolved gas analysis.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권2호
• /
• pp.293-298
• /
• 2016

Recently, interests for maintenance of transmission tower are increasing to extend life of structures and reduce maintenance cost. However, existing classical diagnosis method of corrosion deteriorated degree on the transmission tower steel members, visual inspection, has a problem that error often due to difference of inspector's individual knowledge and experience. In order to solve the problem, this study carried out to develop the corrosion deterioration inspection tool for transmission tower steel members. This tool is composed of camera equipment and computer-aided diagnosis system. We standardized the photographing method by camera equipment to obtain suitable pictures for image processing. Diagnosis system was designed to evaluate automatically degree of corrosion deterioration for member of transmission tower on the basis of the RGB color image processing techniques. It is anticipated that developed the corrosion deterioration inspection tool will be very helpful in decision of optimal maintenance time for transmission tower corrosion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.603-612
• /
• 2009

The bogie hunting sensor detects accelerations of a bogie. It transmits those accelerations using frequency modulated signal to the TCMS(Train Control and Management System) electronics for functional processing. TCMS decide undesirable bogie hunting and high speed instability with frequency modulated signal. The bogie hunting sensor is essential component for safety driving of high speed train. The bogie hunting sensor's quality inspection before sensor is installed on bogie is very important. Therefore it is required equipment for exact inspection of train bogie hunting sensor. This study is about development of Bogie Hunting sensor's inspection equipment that we can improve Bogie Hunting sensor's quality. Accordingly, I suppose that this thesis will be utilized to improve the bogie hunting sensor's quality thru exact inspection.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.30-35
• /
• 2022

This study has focused on the reliability evaluation of FCT inspection automation equipment for electric rice. To evaluate the reliability of FCT inspection automation equipment, voice analysis, Gray/R/G/B channel experiment, FND segment experiment, and robot position repeatability were performed. In the voice analysis experiment, the comparison value between the recorded and digital output waves was over 99%, indicating a very high result. It was confirmed that both the gray/R/G/B experiment using vision and the FND segment could confirm the output value of the product through vision. The position repeatability of the robot is also excellent, so it is concluded that the inspection effect through the FCT automation system will be excellent.

• 월간포장계
• /
• 통권87호
• /
• pp.176-181
• /
• 2000

• 한국지능시스템학회논문지
• /
• 제22권6호
• /
• pp.694-699
• /
• 2012

반도체 검사 공정에 적용하기 위한 대시야 백색광간섭계(WSI ; White Light Scanning Interferometer)를 사용한 반도체 검사 결과를 본 논문에서 제시한다. 각 서브스트레이트에 있는 동일한 여러 범프에 대한 3D 데이터 반복성 측정 실험 결과를 제시한다. 각 서브스트레이트의 모든 범프에 대한 3D 데이터 반복성 측정 실험 결과를 제시한다. 반도체 검사 공정에서 3D 데이터 검사를 고속으로 달성하기 위해 대시야 백색광간섭계를 사용한 반도체 검사는 매우 중요한 의미를 갖는다. 인라인 고속 3D 데이터 검사기 개발에 본 논문이 크게 기여할 수 있다.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.27-34
• /
• 2018

Industrially, die-casting products are formed through casting, and so the methods to inspect the defects inside them are very restrictive. External inspection methods including visual inspection, sampling judgment, etc. enables researchers to inspect possible external defects, but x-ray inspection equipment has been generally used to inspect internal ones. Recently, they have been also applying three-dimensional internal inspections using CT equipment. However, they have their own limitations in applying to the use of industrial inspection due to limited detection size and long calculation time. To overcome the above problems, this paper has suggested a method to inspect internal defects by comparing the CAD data of the product to be inspected with the 3D data of the CT image. In this paper, we proposed a method for fast and accurate inspection in three dimensions by applying x-ray inspection to find internal defects in industrial parts such as aluminum die casting products. To show the effectiveness of the proposed method, a series of experiments have been carried out.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.787-790
• /
• 2004

The large size and high brightness backlight system for LCD panel inspection equipment was designed, fabricated, and evaluated. The cold cathode fluorescent lamp (CCFL) instead of the hot cathode fluorescent lamp (HCFL) were used as the light source. The inverters for driving multi-lamp CCFL backlight systems were also designed and fabricated. The measured luminance of the fabricated CCFL backlight system was 20,000 cd/$m^2$ and the uniformity of the backlight was 85%. The fabricated backlight system was successfully applied to the LCD panel inspection equipment.