• Proceedings of the Korea Society of Design Studies Conference
• /
• 2002.11b
• /
• pp.126-127
• /
• 2002

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.479-486
• /
• 2011

This study determined the effects of the height and the quality of the material of popular heel-up insole on mean plantar foot pressure during walking. Seven healthy college students who are studying at S university in Busan were as participants in this study. After sufficiently explaining about the research to the subjects before the experiment, mean plantar foot pressures were examined using F-Scan Pressure Measure System 5.23 for the gait with shoes inserted insole and the data were compared among the height and the quality of material of insoles. In the result, there was a difference significantly in the mean plantar foot pressure followed the height of insoles both left and right. Especially, mean plantar foot pressure in left indicated significantly lower in 3 cm and 5 cm insoles than in 0 cm and 1 cm insoles. Also mean plantar foot pressure in right showed significantly lower in 3 cm and 5 cm insoles than in 0 cm, and indicated significantly lower in 5 cm insoles than in 1 cm and 3 cm insoles. The mean plantar foot pressure followed the quality of the material of insoles were different significantly. In left, the mean plantar foot pressure of urethane poly-acetyl insole was lower significantly than urethane poly-acetyl inserted air insole, power-gel insole and jelly insole. And the mean plantar foot pressure of urethane poly-acetyl insole was lower significantly than power-gel insole and jelly insole in right. We showed that 3 cm and 5 cm insoles in the height of insoles and Urethane poly-acetyl insole in the quality of material were suitable to reduce a fatigue which is felt in plantar foot during the walking.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.701-710
• /
• 2009

This study was conducted to develop excellent insole with good thermal insulation using new materials. We investigated that aerogel/fiber composite can be used as padding materials of shoes by comparing surface shape, moisture regain, water vapor permeability, thermal insulation and compression rate of insole materials tried with nonwoven fabric padding materials and insole sold in market. The results are as follows. Surface shapes were shown that the most appropriate material for sealing aerogel/fiber composite was high density fabric as per size of particle of aerogel. Moisture regain of aerogel/fabric composite was better than nonwoven fabric padding samples. However, when compared to insole sold in market, its moisture regain was worse than those of insole merchandises. Water vapor permeability was higher in material padded with nonwoven fabric than materials padded with aerogel/fiber composite in all three kinds of sealing fabrics. Thermal conductivity of aerogel/fabric composite was lower than nonwoven fabric material regardless of sealing fabrics. Thermal insulation of aerogel/fiber composite was higher than padding material of nonwoven fabric regardless of sealing fabrics. Compression rate of nonwoven (SP1) was higher than that of aerogel/fiber composite (SP2). Compressive elastic recovery rate of SP1 was also higher than that of SP2, which its compression rate and compressive elastic recovery rate were both poor. As the above result, ultra porous aerogel/fiber composite were proved to be material of good thermal insulation with lower thermal conductivity and also compression rate was proved to be low. Therefore, we can say that aerogel/fiber composite have high possibility to be used as insole materials for cold winter shoes requiring good thermal insulation protection.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.33-38
• /
• 1989

In order to achieve the most suitable designing of shoemaking, the structure of shoemaking is described in this study by inquiring into structural and functional effects given by shoes to human feet. Also, the role of insole that is an essential portion in view of function in shoemaking is described and. for the improvement of quality the fact that selection of material of insole has an effect to quality is substantiated through experiments of adhesive tensile and absorption percentage. Though identification of the qualify of insole with the naked eyes is impossible because it is inserted between the internal layers of a shoe. It is not only an essential portion for the improvement of the quality of shoemaking but it gives an essential effect to the sanitation and health of human body(feet) when insole of lower qualify is used. In view of these the improvement and enhancement of the quality of home-made material of insole are earnestly required.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.1
• /
• pp.147-154
• /
• 2018

PURPOSE: This study examined the ability of experimental socks combined with a functional insole to reduce plantar foot pressure in healthy subjects. METHODS: The study enrolled 15 subjects. An in-shoe measurement device was used to measure the peak plantar pressure while walking. The peak forefoot, midfoot, and hindfoot plantar pressure data were collected under two conditions: the subjects were wearing their own socks and while they were wearing the experimental socks. The paired t-test was used to determine the differences in peak plantar pressure between the two conditions at all three positions. RESULTS: Wearing the experimental socks resulted in a significantly higher peak plantar pressure in the medial forefoot and midfoot areas than wearing one's own socks (p<.05), and also in significantly lower peak plantar pressure in the medial and lateral hindfoot (p<.05). However, there were no significant differences of peak plantar pressure between experimental and own socks in middle and lateral forefoot (p>.05). CONCLUSION: The experimental socks combined with a functional insole decreased plantar pressure in the hindfoot and supported the medial longitudinal arch. However, it is necessary to change the design and material of the forefoot area in the functional insole to prevent foot ulcer at that location in people with diabetes mellitus.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.110-122
• /
• 2023

The COVID-19 pandemic increased people's time at home and caused an 80% increase in noise disputes between floors. The purpose of this study is to propose suitable materials for making indoor shoes (insoles) to minimize noise between floors. Subjects without back pain and leg-related disease (e.g. arthritis, etc.) from three different age groups (childhood, adolescence, and adulthood) were recruited for the study. Five polymer insole materials were considered: Chloroprene Rubber (CR foam), Ethylene Propylene Diene Monomer (EPDM foam), Natural Latex foam, Ethylene Vinyl Acetate (EVA foam), and Polyurethane (PU foam). From these materials, 20 combinations were prepared and randomly tested for noise and vibration. The results revealed a significant difference in noise and vibration levels based on the type of material used and the age of the subject. Nevertheless, all materials under consideration successfully reduced noise and vibration; in particular, type A-C greatly decreased. The CR foam material was especially effective at noise and vibration reduction (p<.01). This study suggests that adding insoles into socks that children wear at home could reduce noise vibration and disputes between floors.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.31-36
• /
• 2003

Impact characteristics of six DM(Diabetes Mellitus) shoe insole materials (Podian, Plastazote black, Plastazote white, Flexible PU foam, Podialene 200 blue and Podia flex) and three multi-density insoles (AP, OS and PW insoles) were determined in the present study, using a self-designed impact measurement system. The coefficient of restitution, the median frequency and the attenuation index were calculated for each material, based on impact forces and linear accelerations. Podian revealed the superiority in the coefficient of restitution and the attenuation index. The median frequency of the Flexible PU foam was the smallest. Results also showed that the heel region was the most impact-attenuated among other areas in the insole. OS insole showed the better characteristics in the coefficient of restitution and the median frequency. but there was no significant difference in the attenuation index. Similar impact characteristics were found in all areas in PW insole. since it was basically of the same dual-density polyurethane.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.423-432
• /
• 2019

The purpose of this study was to investigate the effect of cushion insole on lumbar flexibility and motor fitness in patients with lumbar spinal stenosis. 26 patients with lumbar spinal stenosis were randomly assigned to the experimental group 13 and the control group 13. Volunteers were allowed to wear cushioned insoles for two hours a day for six weeks. The experimental group was 8 mm and the control group was 4 mm, wearing a cushion insole as a blinded experiment. There was a significant increase(p<0.05) in the flexion test of the experimental group ($3.38{\pm}3.12$), but not statistically significant in the other tests(p>0.05). In conclusion, cushion insole was not suitable for intervention for lumbar spinal stenosis. There is a need to study the height and material of the insoles in the future.

• Composites Research
• /
• v.34 no.6
• /
• pp.400-405
• /
• 2021

In this study, a composite material frame was designed to increase the energy harvesting efficiency of polyvinylidene fluoride (PVDF) ribbon harvesters which are installed inside smart shoes. In order to minimize the amount of deformation in the load direction of the frame, it was designed using carbon continuous fiber composites and its complex shaped structure was manufactured using a 3D printer. In order to calculate the amount of deformation of the insole and midsole of the shoes under the condition of the load generated during walking, the insole and midsole were modeled using the distributed spring elements. Using finite element analysis, the elongation of ribbon-type harvesters mounted on smart shoes was calculated during walking. It is expected that the predicted elongation of the harvester can be utilized to increase the energy harvesting efficiency of smart shoes.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.270-284
• /
• 2017

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.