• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.175-184
• /
• 1998

The dose distribution evaluation program for the stereotactic radiosurgery treatment planning system using a gamma knife has been built in order to work on PC. And this custom-made dose distribution is compared with that of commercial treatment planning program. 201 source position of a radiation unit were determined manually using a gamma knife collimator draft and geometrical coordinates. Dose evaluation algorithm was modified for our purpose from the original KULA, a commercial treatment planning program. With the composed program, dose distribution at the center of a spherical phantom, 80 mm in diameter, was evaluated into axial, coronal and sagittal image per each collimator. Along with this evaluated data, the dose distribution at a arbitrary point of inside the phantom was compared with those from KULA. Radiochromic film was set up at the center of the phantom and was irradiated by gamma knife, for the verification of dose distribution. In result, the deviation of the dose distribution from that of KULA is less than ${\pm}$3%, which is equivalent to ${\pm}$0.3 mm in 50% isodose distribution for all examined coordinates and film verification. The custom-made program, GPl is proven to be a good tool for the stereotactic radiosurgery treatment planning program.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.124-131
• /
• 2010

This study was conducted to investigate the potentials for the forest restoration on reclaimed land by using willow trees (Salix koreensis Anderson) selected from a coastal reclaimed land made in inside of the Sihwa tide embankment. We first collected six individual willow trees that were the only tree species grown in the reclaimed land. Total 7 clones from cuttings of the collected trees and the control were grown in a greenhouse for two months prior to applying the different concentrations of NaCl solutions (0.0%, 0.1%, 0.5%, and 1.0%). One month after the NaCl application, the survival rates of clones from both the collected trees, and the control were significantly decreased in a NaCl dose-dependent manner. However, there was no significant difference between the collected trees and the control in terms of survival rate, hight and diameter of cuttings, and the numbers of leaves in greenhouse condition. In conclusion, the willow trees collected from the coastal reclaimed land showed no tolerance against NaCl compared to the control grown in ordinary soil, suggesting that further study is required to determine what the most important factor is to select salt tolerant tree species.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.277-286
• /
• 2006

Population ecology of Cobitis tetralineata was examined at Churyeong Stream, Seomjin River, Korea. C. tetralineata inhabited on the sand bottoms with $10{\sim}20cm/see$ in current velocity, and $30{\sim}150cm$ in water depth. This species was active on the sand during the daylight hours from March to October, but they hibernated in the inside of the sand during the winter season. Sex ratio of female to male was 1:0.57, and female was $20{\sim}30mm$ (TL) larger than male. The age group of C. tetralineata (female) population showed that the $20{\sim}40mm$ group is 0+ years old, the $45{\sim}65mm$ group 1+ years old, the $65{\sim}90mm$ group 2+ years old, and the group longer than 90 mm over 3 years old. Males $13{\sim}14$ months old after hatching had lamina circularis at the base of its pectoral fin as a secondary sexual character. And in its spawning season, lateral color pattern of male was changed as a sexual dimorphism. The spawning season may be from late June to middle July, $22{\sim}26^{\circ}C$ water temperature. The average number of mature eggs in ovary was about $1,288{\pm}583(474{\sim}2,976)$, egg diameter was about $0.98{\pm}0.1mm$. C. tetralineata fed mainly on Chironomidae, Arcellidae, Branchioda and Algae. The feeding rate was the highest in April and September, but they did not fed in the winter.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.55-62
• /
• 1985

This study was made on bamboo shoot's damage of Phyllostachys edulis by field mice in Jinju, Gyeongsangnam-do, and grasped the inhabitation environment by the analysis of around and lower vegetation in damaged bamboo stands, and made clear the species of field mice in damaged bamboo stand, the damaged degree and rate, therefore, were put in practice for contribution with damage prevention and extermination. The results were summarized as follows; The damaged degree were influenced by inhabitation environment and stand density around damaged bamboo stands. The damaged degree were shown 4,359.1 g with 7.1 shoots per. ha and the rate 0.23%. The damage season were from the middle of April to the middle and end of May, the most damaged season was about April 23. The length of damaged bamboo shoot was mean 28.12 cm, the inside diameter 7.49 cm, the weight 613.96 g. The damaged type of parts was shown to more numerous overland and surface damaged type of three types; overland, surface and underground damaged type. The field mice to be captured in damaged bamboo stand were three species; Apodemus agrarius coreae, Mus molossinus and Crocidura lasiura, the species of main damage was Apodemus agrarius coreae of captured Rodentia's 2 species. Crocidura lasiura in order Insectivora was found to inhabitate for the first time at southern region in Korea.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.17-33
• /
• 1987

As a result of technical advances and industrialization, the characteristics of domestic and industrial wastes are becoming more complex. Accordingly, improved treatment and disposal systems are being continuously sought to take account of complex characteristics and to comply with economic restrictions. In this study, an application of pyrolysis to the treatment of industrial wastes, including waste scrap rubber, waste raw material used in making the slipper bottom and waste PVC pipe, and the effectiveness of pyrolysis in resource recovery from these wastes were investigated. Batches of wastes were pyrolysed by external heating to a temperature of 400-800$\circ$C in a 32 mm diameter x 0.9 m long silica tube to produce combustible gases, oils and chars. Before the start of pyrolysis runs, the entire system was purged with nitrogen gas to exclude the air. The temperature inside the retort was controlled by the thermocouple in the gas stream, and referred to as the pyrolysis temperature. Under these conditions three products were separately collected and further analyzed. The results were summarized as follows. 1. More gases and less chars were produced with higher pyrolyzing temperature and with higher rates of heating, but the yields of oils tended downwards at temperatures above 700$\circ$C. Accordingly, operating conditions of pyrolysis should be varied with desired material. 2. Calorific values and sulfur contents of produced oils were sufficient and suitable for fuel use. Chars from waste rubber had high heating values with low sulfur contents, but calorific values of chars from waste PVC and waste slipper were as low as 3, 065-4, 273 kcal/kg and 942-2, 545 kcal/kg, respectively. Therefore, char from these wastes are inappropriate for fuel. 3. Soluble contents of Pb, Cd, Cu and Zn in chars from waste rubber and waste slipper were below the Specific Hazardous Waste Treatment Standards. However soluble contents of Pb and Cd in chars from waste PVC were one or two times and five or seven times exceedingly the Specific Hazardous Waste Treatment Standards, respectively. 4. Post high heating is desirable for treatment method of waste PVC which generates toxic hydrogen chloride. 5. The proportions of hydrogen, methane and ethane in produced gases were in the range of 3.99-35.61% V/V, 18.22-32.50% V/V and 5.17-5.87% V/V, respectively. 6. Pyrolysis is a useful disposal method in case of waste slipper, which was hardly combustible, and thus investigations of this kind of materials are required for effective management of industrial waste. 7. Based upon the possible market development for products, overall pyroly economics to take account of treatment values of noncombustible or hazardous materials should be evaluated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.53-62
• /
• 2017

The forced convection heat transfer performance of a twist-vane spacer grid for a dual-cooled annular fuel assembly was examined experimentally. The twist-vane spacer grid was uniquely designed to enhance mixing inside subchannels and mixing between adjacent subchannels. For testing, a $4{\times}4$ square-arrayed rod bundle with narrow gaps between rods was prepared as the dual-cooled annular fuel assembly to be simulated. The pitch-to-rod diameter ratio of simulated dual-cooled annular fuel assembly was 1.08. The experiments were performed under the following conditions: axial bulk velocity, 1.5 m/s and heat flux, $26kW/m^2$. With regard to the circumferential temperature distribution, the lowest rod-wall temperatures upstream and downstream were measured at the subchannel center and the position toward the tip of twist-vane, respectively. With regard to the axial temperature distribution, behind the twist-vane spacer grid, the rod-wall temperature decreased drastically, and the Nusselt number was enhanced by up to 56 %. The present measured data indicate that the twist-vane spacer grid can effectively improve the forced convection heat transfer in the dual-cooled annular fuel assembly with narrow gaps.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.317-323
• /
• 2013

This research was conducted to obtain the basic information for establishment of standard guidelines in the design and installation of roof ventilation system in single-span plastic greenhouse. To achieve this, the greenhouse structure & characteristics, cultivation status, and ventilation system were investigated for single-span greenhouse with roof ventilation system cultivating the Cucurbitaceae vegetables, watermelon, cucumber, and oriental melon. Most of single-span watermelon greenhouse in Haman and Buyeo area were a hoop-style and the ventilation system in those greenhouses mostly consisted of two different types of 'roof vent (circular or chimney type) + side vent (hole) + fan' and 'roof vent (circular type) + side vent (hole or roll-up type)'. The diameter of circular and chimney-type vent was mostly 60cm and the average number of vents was 10.5 per a bay with vent spacing of average 6.75m. The ratio of roof vent area to floor area and side vent area in the single-span watermelon greenhouse with ventilation fan were 0.46% and 7.6%, respectively. The single-span cucumber greenhouse in Haman and Changnyeong area were a gable roof type, such as even span, half span, three quarter and the 70.6% of total investigated single-span greenhouses was equipped with a roof ventilation fan while 58.8% had a circulation fan inside the greenhouse. The ratios of roof vent area to floor area in the single-span cucumber greenhouse ranged from 0.61 to 0.96% and in the case of the square roof vent, were higher than that of the circular type vent. On average, the roof ventilation fan in single-span cucumber greenhouse was equipped with the power input of 210W and maximum air volume of $85.0m^3/min$, and the number of fans was 9.75 per a bay. The number of roof vent of single-span oriental melon greenhouse with only roll-up type side vent ranged from 8 to 21 (average 14.8), which was higher than that of other Cucurbitaceae vegetables while the vent number of the greenhouse with a roof ventilation fan was average 7 per a bay.

• Research in Plant Disease
• /
• v.10 no.1
• /
• pp.34-38
• /
• 2004

The damage of plant growth and alteration of cellular tissues of barley infected by Barley yellow mosaic virus (BaYMV) was explored. The infected plots significantly damaged in all of measured factors by the disease. In severely diseased plant, the viral infection affected on plant growth like as shorten culm length about 25cm, 36％ constrained ratio, comparing to healthy. The yield decreased over 70％ in diseased plots by fewer numbers of spike and kernel per square meter and spike, respectively. BaYMV constructed typical inclusion body like a pinwheel type inside barley leaves, and the infection affected on cellular elongation or growth not cell division in examined three parts as stem, neck of panicle and node, related to dwarfness of infected barley. The stem tissues were most severely affected on cell growth as restrained epidermis cell length in diameter and vascular bundle size. In neck of panicle tissues, distribution and size of tissues of fiber and cortex parts, respectively, showed differences between healthy and infected plants. In node part, healthy plant showed bigger tissue size as 1.5 times than infected plant. Theses results suggest that BaYMV infection could affect on the cell growth not cell division, and which resulted shorten culm length in plant growth and decreased yield, finally.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.312-316
• /
• 2006

A optimal condition for the Ginkgo biloba extraction in ethanol and water binary solvent system has been proposed based on concentration of bilobalide and ginkgolide known as having a antimicrobial components in the range 5% to 70% ethanol in water at $80^{\circ}C$. Concentration of bilobalide as a single component of Ginkgo biloba leaves extract is the highest at the 60% ethanol and ginkgolide A and B is highest at 50% ethanol. Antimicrobial effect of Ginkgo biloba leaves extracts on the S. aureus was also examined by disc diffusion test and optical density test. In case of the disc diffusion test, the clean zone diameter was increased from 0.95 cm to 1.70 cm as ethanol concentration increased from 5 to 70%. However, over the 40% of ethanol concentration the antimicrobial effect was almost flat. Based on these results, we propose that the 40% of ethanol and 60% water solvent is most desirable for Ginkgo biloba extract considering vapor pressure problem in concentrating process after extraction. We introduced SEM and TEM to figure out the morphological change on the surface and inside body of S. aureus when Ginkgo biloba leaves extract was treated. After mixed with Ginkgo biloba leaves extract blast like blebs appeared on the surface of S. aureus cells and cell wall was not observed. From the these results, it seems that the Ginkgo biloba leaves extract including bilobalide and ginkgolide A, B prevent cell wall synthesis.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.107-114
• /
• 2007

Establishments of the seedlings inside the natural forest from adjacent artificial forests would be an important factor in forest stand dynamics. This study was conducted to see the invasion of Korean pine (Pinus koraiensis) seedlings which is not native in this region, into the natural deciduous broad-leaved forest in Gwangneung, Korea. There is no mother tree at the I ha study site while the number of naturally regenerated P. koraiensis seedlings was 345 trees and 56% of them were clumped with more than two seedlings at each point. Applying the image segmentation method to IKONOS satellite image of January, 2003, the distance from the center of 1 ha study site to the nearest mother tree and plantation of Korean pine were 200 m and 270 m, respectively. The average height and root-collar diameter of the seedlings were 34 em and 7 mm, respectively and the age of 207 seedlings (60%) were below 5 years old. Most abundant range of soil moisture gradient and LAl (leaf area index) were from 16 to 20% and those of LAI were from 3.1 to 3.5. To understand the dynamics and seed dispersal pattern of Korean pine in the Gwangneung natural deciduous broad-leaved forests, additional studies not only long-term monitoring of growth and mortality of naturally regenerated Korean pine seedlings but also application of stable isotope analysis and molecular genetic techniques was recommended.