• Geomechanics and Engineering
• /
• v.9 no.2
• /
• pp.207-218
• /
• 2015

In this paper, forming of fully clamped circular plate by using low velocity impact system has been investigated. This system consists of liquid shock tube and gravity drop hammer. A series of test on mild steel and aluminum alloy plates has been done. The effect of varying both impact load and the plate material on the deflection are described. This paper also presents a simple model to prediction of mid-point deflection of circular plate by using input-output experimental data. In this way, singular value decomposition (SVD) method is used in conjunction with dimensionless number incorporated in such complex process. The results of obtained model have very good agreement with experimental data and it provides a way of studying and understanding the plastic deformation of impact loads.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.101-108
• /
• 2001

In the previous study, an improved QRD (QR Decomposition)-ILS(Iterative Least-Squares) method is proposed to estimate the structural parameters at the element level using response data alone without using any information of excitation measurements for the assessment of local damages and deterioration in complex and large structural systems. But for a complex and large structural system, where response measurement at every dynamic degree of freedom(DDOF) is not possible, the absence of some observation points of responses and its effect on the proposed SI method must be studied In the paper, a QRD-ILS technique that utilizes the known intact stiffness information estimated based on the visual inspection, field measurements and/or NDT tests is proposed to identify local damages of fracture critical members using measured responses only at limited DDOFs. A numerical example is used to illustrate the application of this technique. The results indicate that the proposed SI technique is very simple but efficient, since no input information are required with only limited observations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.126-130
• /
• 2005

In this paper, a low-complexity maximum-likelihood (ML) decoder based on QR decomposition, called real-valued LCMLDec decoder or RVLCMLDec for short, is proposed for the Vertical Bell Labs Layered Space-Time (V-BLAST) architecture, a promising candidate for providing high data rates in future fixed wireless communication systems [1]. Computer simulations, in comparison with other detection techniques, show that the proposed decoder is capable of providingthe V-BLAST schemes with ML performance at low detection complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.98-102
• /
• 2005

In the QR Decomposition-based (QRD) decoding class, the system performance is sensitive to the error propagation. Thus, it is critical to correctly decode the previous layers. One approach to desensitize the error propagation is to propose the optimal decoding order of layers. In this work, we propose a new extended-list Sorted QRD-base (SQRD) decoding approach. In the proposed decoding scheme, the solution of the few first layers is extended as the list of promising possible solutions. By doing so, the diversity of the lowest layer is increased. As a result, the system performance is less sensitive to the error propagation than its counterparts. The proposed approach is verified by the computer simulation results.

• Journal of information and communication convergence engineering
• /
• v.3 no.2
• /
• pp.76-79
• /
• 2005

In this paper, a low-complexity maximum-likelihood (ML) decoder based on QR decomposition, called real-valued LCMLDec decoder or RVLCMLDec for short, is proposed for the Vertical Bell Labs Layered Space-Time (V-BLAST) architecture, a promising candidate for providing high data rates in future fixed wireless communication systems [1]. Computer simulations, in comparison with other detection techniques, show that the proposed decoder is capable of providing the V­BLAST schemes with ML performance at low detection complexity

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.32-35
• /
• 2004

In this paper, we propose two novel high-rate high-performance space-time codes for multiple-input multiple-output (MIMO) systems. When $n_{T}$ transmit antennas and $n_{R}$ = $n_{T}$ receive antennas are deployed, the two proposed codes respectively offer transmission rates of ( $n_{T}$ -I) and ( $n_{T}$ - 2) symbols per channel use and diversity orders of 3 and 5. As a consequence, our proposed codes allow the MIMO systems to employ a simple detection technique based on QR decomposition. Moreover, for equal or even higher spectral efficiencies, our proposed codes always provide much better bit error rate (BER) performances than V-BLAST architecture does when $n_{R}$ = $n_{T}$. Computer simulation is given to verify performances of our proposed codes.sed codes.des.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.67-70
• /
• 2004

In this paper, we propose two novel high-rate high-performance space-time codes for multiple-input multiple-output (MIMO) systems. When $n_T$ transmit antennas and When $n_R$ ＝ When $n_T$ receive antennas are deployed, the two proposed codes respectively offer transmission rates of (When $n_T$ -1) and (When $n_T$ -2) symbols per channel use and diversity orders of 3 and 5. As a consequence, our proposed codes allow the MIMO systems to employ a simple detection technique based on QR decomposition. Moreover, for equal or even higher spectral efficiencies, our proposed codes always provide much better bit error rate (BER) performances than V-BLAST architecture does when When $n_R$ ＝ When $n_T$. Computer simulation is given to verify performances of our proposed codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.107-110
• /
• 2006

This work presents a low complexity maximum-likelihood decoder for signal detection in VBLAST-STBC system, which employs non-square O-STBC code rate 3/4. By stacking received symbols from different received symbolduration and applying QR decomposition resulting the special format of upper triangular matrix R, the proposed decoder is able to provide not only ML-like BER performance but also very low computational load. The low computational load and ML-like BER performance properties of the proposed decoder are verified by computer simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.213-223
• /
• 1999

In this paper, input-output transmission characteristics of the Eclipse, which is a parallel machine tool capable of 5 face rapid machining, are investigated. By splitting the weighted Jacobian matrix into two parts, the force and moment transmission characteristics together with the velocity and angular velocity transmission characteristics are analyzed. A new manipulability measure, which combines the volume of the manipulability ellipsoid and the condition number of the splitted Jcobian matrix, is proposed. Two link parameters, the ratio of upper and lower platforms' radii and the length of a supporting link of the Eclipse, are designed by applying the new manipulability measure derived. Computer simulations are provided.

• Earthquakes and Structures
• /
• v.16 no.3
• /
• pp.321-327
• /
• 2019

This study investigated the possibility of using the recorded micro tremor data on ground level as ambient vibration input excitation data for investigation and application Operational Modal Analysis (OMA) on the bench-scale earthquake simulator (The Quanser Shake Table) for model chimney. As known OMA methods (such as EFDD, SSI and so on) are supposed to deal with the ambient responses. For this purpose, analytical and experimental modal analysis of a model chimney for dynamic characteristics was performed. 3D Finite element model of the chimney was evaluated based on the design drawing. Ambient excitation was provided by shake table from the recorded micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition is used for the output only modal identification. From this study, best correlation is found between mode shapes. Natural frequencies and analytical frequencies in average (only) 1.996% are different.