• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.171-172
• /
• 2011

The paper proposes a close loop control algorithm for Z-source inverter. The algorithm is realized by PWM duty ratio control in order to improve the output voltage to it's desired level. The controller consist of the output voltage PID controller and DC input voltage P controller. Using the DQ coordinate transformation simplify the controller design. The PSIM simulation results verify the validity by means of comparing the system with or without compensation and estimating if the system has output consistency function when ZSI's load and input voltage value changing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.327-330
• /
• 1996

It is well known that the controller output limits have a signifiant effect on the closed loop system performance. Considering the input constraints in GPCF, an effective selection method of the control weighting(.gamma.) is proposed to reduce the amplitude and the rate of control signals so that control signals lie within the limits. It is based on the relation between control weighting(.gamma.) and optimal solution of the unconstrained GPCF. The GPCFIC algorithm chooses an .gamma. at each sampling time so that all unconstrained GPCF output over the control horizon satisfy the rate and the amplitude constraints. In order to evaluate the performance of the GPCFIC, the computer simulations have been done for level control of PWR steam generator in low power operation and shown satisfactory results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.89-96
• /
• 1997

Most civil engineering structures, such as highway bridges, towers, power plants and offshore structures suffer structural damages over their service lives caused by adverse loading such as heavy transportation loads, machine vibrations, earthquakes, wind and wave forces. Especially, if excessive load would be acted on the structure, general or partial stiffness should be degraded suddenly and service lives should be shortened eventually For realistic damage assessment of these civil structures, System Identification method using only structure dynamic response data with unknown input excitation is required and thus becoming more challenging problem. In this paper, an improved Iterative Least Squares method is proposed, which seems to be very efficient and robust method, because only the dynamic response data such as acceleration, velocity and displacement is used without input data, and no information on the modal properties is required. The efficiency and robustness of the proposed method is proved by numerical problems and real single span beam model test.

• 대한전자공학회논문지SD
• /
• 제48권9호
• /
• pp.31-39
• /
• 2011

본 논문에서는 Carbon Nanotube(CNT) 센서 어레이를 위한 저 전력, 소 면적의 신호 검출 시스템을 제안한다. 제안된 시스템은 신호 검출회로, 디지털 제어기, UART I/O로 구성된다. 신호 검출회로는 VGA를 공유하는 64개의 transimpedance amplifier(TIA)와 11비트 해상도의 successive approximation register-ADC(SAR-ADC)를 사용하였다. TIA는 센서의 전압 바이어스 및 전류를 증폭하기 위한 active input current mirror(AICM)와 증폭된 전류를 전압으로 변환하는 저항 피드백 방식의 VGA(Variable Gain Amplifier)로 구성되어있다. 이러한 구조는 큰 면적과 많은 전력을 필요로 하는 VGA를 공유하기 때문에 다수의 센서 어레이에 대해 검출 속도의 저하 없이 저 전력, 소 면적으로 신호 검출이 가능하게 한다. SAR-ADC는 저 전력을 위하여 입력 전압 level에 따라 하위 bit의 동작을 생략하는 수정된 알고리즘을 사용하였다. ADC 및 센서의 선택은 UART Protocol 기반의 디지털 제어기에 의해 선택되며, ADC의 data는 UART I/O를 통해 컴퓨터와 같은 단말기를 통해 모니터링 할 수 있다. 신호 검출회로는 0.13${\mu}m$ CMOS 공정으로 설계되었으며 면적은 0.173 $mm^2$이며 640 sample/s의 속도에서 77.06${\mu}W$의 전력을 소모한다. 측정 결과 10nA - 10${\mu}A$의 전류 범위에서 5.3%의 선형성 오차를 가진다. 또한 UART I/O, 디지털 제어기는 0.18${\mu}m$ CMOS 공정을 이용하여 제작하였으며 총면적은 0.251 $mm^2$ 이다.

• 한국컴퓨터산업학회논문지
• /
• 제4권10호
• /
• pp.611-620
• /
• 2003

본 논문에서는 상정사고를 감안한 개선된 GUI기반의 전력계통의 조류해석 도구를 제시하였다. 제시한 툴은 전력계통의 조류계산의 교수 및 학습을 돕는 효과적인 도구이다. 이 소프트웨어는 Asymetrix사의 ToolBookII로 개발하였으며 명칭을 PFGUI(Power Flow GUI)로 정하였다. PFGUI는 입력매개변수와 그 결과간의 관계성을 테이블 형태가 아닌 시각적인 그림으로 보여 주기 때문에 전력계통운용및 제어의 연구에 더욱 친화적이다 PFGUI는 선로탈락시의 조류계산 출력을 계통구성도상에 같이 나타내도록 하였다. 사용자들은 계동도강에서 조류계산의 시스템 데이터를 입력하고 손쉽게 모선의 전압과 전력, 선로조류에 대한 결과도를 확인 할 수 있다. 또한 선로전압조정기, 콘덴서, 부하레벨, 선로탈락 등의 다양한 형태의 영향을 파악할 수 있다. 제안된 PFGUI는 Ward-Hale 6-Bus 계통을 연구대상으로 하였다.

• 한국산업정보학회논문지
• /
• 제6권2호
• /
• pp.31-37
• /
• 2001

본 연구에서는 WLL 다중채널 수신단말기 RF-모듈을 제작하였다. 그리고 WLL 다중채널 RF-모듈의 실질적인 성능을 수신감도, 인접채널 선택도, 스퓨리어스 응답제한 등의 파라미터를 이용하여 평가하였다. 실제로 WLL 다중채널용 RF-모듈을 제작하여 측정한 결과, 입력전력이 -90 dBm에서 -30 dBm까지 변화할 때 -30 dBm의 일정한 출력전력이 유지되어 약 60 dB의 동작범위를 가졌다. WLL 단말기 RF 출력단의 통과대역내의 평탄도가 약 2 dB 이내를 유지하여 대역화산신호의 전력제어가 정확히 이루어지고 있음을 확인하였다. 그리고 WLL RF 수신 전단의 전송대역폭은 10 MHz으로 본 연구의 설계목표와 정확히 일치하였다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.224-232
• /
• 2005

A new three phase three-level Pulse Width Modulation (PWM) Switched Voltage Source (SVS) inverter with zero neutral point potential is proposed. It consists of three single-phase inverter modules. Each module is composed of a switched voltage source and inverter switches. The major advantage is that the peak value of the phase output voltage is twice as high as that of a conventional neutral-point-clamped (NPC) PWM inverter. Thus, the proposed inverter is suitable for applications with low voltage sources such as batteries, fuel cells, or solar cells. Furthermore, three-level waveforms of the proposed inverter can be achieved without the switch voltage imbalance problem. Since the average neutral point potential of the proposed inverter is zero, a common ground between the input stage and the output stage is possible. Therefore, it can be applied to a transformer-less Power Conditioning System (PCS). The proposed inverter is verified by a PSpice simulation and experimental results based on a laboratory prototype.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2004

Recently, various acoustic artifacts that contains speaker have been produced such as cellular phone. Speaker consists of diaphragm generating sound and coil vibrating diaphragm. Generally, good speaker means that it has a wide frequency range, high output power rate to input power and flat sound pressure level in specified frequency range. Acoustic characteristic was estimated through the experiment and computer simulation, or sound power was controlled with acoustic sensitivity in a natural frequency range fer last decade. However, the flatness of sound pressure level has not been considered to enhance the sound quality of a speaker. Tn this study, a method for speaker design is proposed for a good acoustic characteristic, which is flatness of SPL(sound pressure level) and wideness between the first and second natural frequency. SYSNOISE is used fer acoustic analysis and ANSYS is used for harmonic response analysis and modal analysis. Optimization for acoustic characteristics of a speaker diaphragm is performed using ModelCenter. All analyses are done within a frequency domain. And we confirm that the experimental and computational simulations have similar trend.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.120-126
• /
• 2021

DC-link capacitors are one of the main components in two-level three-phase voltage source inverters (VSIs); they provide the pulsating input current and stabilize the vacillating DC-link voltage. Ideally, the larger the capacitance of DC-link capacitors, the better the DC-link voltage stabilizes. However, high capacitance increases the cost and decreases the power density of VSI systems. Therefore, the capacitance should be chosen carefully on the basis of the DC-link voltage ripple requirement. However, the DC-link voltage ripple is dependent on the pulse-width modulation (PWM) strategy. This study especially presents a DC-link voltage ripple analysis when the minimum loss discontinuous PWM strategy is applied. Furthermore, an equation for the selection of the minimum capacitance of DC-link capacitors is proposed. Experimental results with R-L loads are also provided to verify the effectiveness of the presented analysis.

• 산업기술연구
• /
• 제29권B호
• /
• pp.145-149
• /
• 2009

A RF-DC converter is one of the most important components for a wireless power transmission. It has been developed for many applications such as space solar power system, and Radio Frequency Identification(RFID). In this paper, we designed three types of RF-DC converter and compare the performance of each. All types RF-DC convertoer have a maximum conversion efficiency at input power level of 0 dBm~5 dBm and RF-DC converter of third type was the best performance that has a 21.9% of conversion efficiency.