• Water for future
• /
• v.29 no.5
• /
• pp.223-233
• /
• 1996

Daily streamflow model, DAWAST, considering the meteorologic and geographic characteristics of the Korean watersheds has been developed to simulate the daily streamflow with the input data of daily rainfall and pan evaporation. The model is the conceptual one with three sub-models which are optimization, generalization, and regionalization models. The conceptual model consists of three linear reservoirs representing the surface, unsaturated, and saturated soil zones and water balance analysis was carried out in each soil zones on a daily basis. Optimization model calibrates the parameters by optimization technique and is applicable to the watersheds where the daily streamflow data are available Generalization model predicts the parameters by regression equations considering the geographic, soil type, land use, and hydrogeologic characteristics of watershed and is appicable to ungaged medium or small watersheds. Regionalization model cites the parameters from the analysed ones considering river system, latitude and longitude, and is applicable to ungaged large watersheds.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.28-36
• /
• 2018

The experimental results of the model tests for the twin propeller cavitation noise are presented. The model test was carried out by means of procedure of noise measurement followed by the signal processing and full-scale extrapolation. In order to convert the measured sound pressure level into the sound source level, transfer function measurements for three conditions were performed according to the combination of locations and number of virtual sources. White noise and LFM signal were used as a source signals to examine the influence of the input signal. For the twin propellers, 5 transfer functions were defined and the results were discussed. Cavitation noise measurement tests were performed similarly to the transfer function measurement test. Noise source localization analysis was performed to confirm the test effectiveness. It was confirmed that the source level of the twin propeller can be estimated reliably by using transfer function corrections. Finally, the model test results were converted into full-scale by applying the ITTC '87 model-ship scaling raw, and the validity of the model test was confirmed by comparison with the full-scale measurement result.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1049-1057
• /
• 2020

The shift from elite education to mass education in Vietnam has met the demand for education for everybody as well as for quality human resource talent for an emerging nation. Under the resource constraint, understanding the quality dimensions of education and its priority level is important for effective and efficient policies. This study was carried out using both qualitative and quantitative methodologies to develop quality criteria and a ranking model. Two rounds of in-depth interviews were conducted with fifteen experts in the field, who were rectors, employers, and recruitment specialists to develop the quality framework applied in Vietnamese universities under total quality management (TQM), starting from the input of the senior secondary school leavers, through a teaching process to the output. The first round of interviews were unstructured questionnaires designed to explore the main factors in quality assessment model. The second round affirmed the experts' agreement on the assessment model. Then, fuzzy logic was applied to rank eight criteria in the quality assessment model into priority order: cost, teaching and administrative staff, leadership, curriculum, student-related factors, internationalization, admissions, and campus. The results are critical for identifying the necessary actions to enhance the education quality and to further research on the optimal quality model.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.119-133
• /
• 2013

This study aims to provide power generating plants with eco-efficiency information. To implement the purposes, of study, both DEA(Data, Envelopment Analysis) model and interview were incorporated in terms of methodologies. To analyze the managerial efficiency, total labor cost and number of employees were considered as input factors. CO2, NOx, and water also were considered as input factors to analyze eco-efficiency. Both annual total power product and annual total revenue were used as output factors. CRS(Constant Return to Scale) and VRS(Variable Return to) model were facilitated in this analysis. According to the findings, most of the power plants were evaluated as 'Efficient'' taking into consideration of average value, both 0.928 from CCR model and 0.969 from VRS model. 7 DMUs including DMU3 and DMU12 are efficient out of 35 DMUs relatively, other DMUs are inefficient. For results of inefficient output factors distribution, it was found that inefficiency for NOx was marked relatively higher than CO2. In order to improve the eco-efficiency in the power plants in the long term, the target amount of Co2 as well as NOx reduction needs to be properly proposed in consideration of particularity of power plants. In the long run, renewable energy, alternative fuels should be adapted to reduce the eco-inefficient.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.12
• /
• pp.499-508
• /
• 2022

A lot of research has been carried out on the Hangeul generation model using deep learning, and recently, research is being carried out how to minimize the number of characters input to generate one set of Hangul (Few-Shot Learning). In this paper, we propose a CKFont2 model using only 14 letters by analyzing and improving the CKFont (hereafter CKFont1) model using 28 letters. The CKFont2 model improves the performance of the CKFont1 model as a model that generates all Hangul using only 14 characters including 24 components (14 consonants and 10 vowels), where the CKFont1 model generates all Hangul by extracting 51 Hangul components from 28 characters. It uses the minimum number of characters for currently known models. From the basic consonants/vowels of Hangul, 27 components such as 5 double consonants, 11/11 compound consonants/vowels respectively are learned by deep learning and generated, and the generated 27 components are combined with 24 basic consonants/vowels. All Hangul characters are automatically generated from the combined 51 components. The superiority of the performance was verified by comparative analysis with results of the zi2zi, CKFont1, and MX-Font model. It is an efficient and effective model that has a simple structure and saves time and resources, and can be extended to Chinese, Thai, and Japanese.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.34-40
• /
• 2005

In this paper we propose a turbojet engine controller of unmanned aircraft based on the Fuzzy-PI algorithm. To prevent any surge or a flame out event during the engine acceleration or deceleration, the PI-type fuzzy controller effectively controls the fuel flow input of the control system. The fuzzy inference rule made by the logarithm function of acceleration error improves the tracking error. Computer simulations applied to the linear model of a turbojet engine show that the proposed method has good tracking performance for the reference acceleration and deceleration commands.

• Structural Engineering and Mechanics
• /
• v.28 no.1
• /
• pp.89-105
• /
• 2008

The paper presents a study on the effects of soil-structure-interaction (SSI) on the performance of the compliant liquid column damper (CLCD) for the seismic vibration control of short period structures. The frequency-domain formulation for the input-output relation of a flexible-base structure with CLCD has been derived. The superstructure has been modeled as a linear, single degreeof-freedom (SDOF) system. The foundation has been considered to be attached to the underlying soil medium through linear springs and viscous dashpots, the properties of which have been represented by complex valued impedance functions. By using a standard equivalent linearization technique, the nonlinear orifice damping of the CLCD has been replaced by equivalent linear viscous damping. A numerical stochastic study has been carried out to study the functioning of the CLCD for varying degrees of SSI. Comparison of the damper performance when it is tuned to the fixed-base structural frequency and when tuned to the flexible-base structural frequency has been made. The effects of SSI on the optimal value of the orifice damping coefficient of the damper has also been studied. A more convenient approach for designing the damper while considering SSI, by using an established model of a replacement oscillator for the structure-soil system has also been presented. Finally, a simulation study, using a recorded accelerogram, has been carried out on the CLCD performance for the flexible-base structure.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.219-224
• /
• 2012

In the communication mobile terminal, Vocabulary recognition system has low recognition rates, because this problems are due to phoneme feature extract from inaccurate vocabulary. Therefore they are not recognize the phoneme and similar phoneme misunderstanding error. To solve this problem, this paper propose the system model, which based on the two step process. First, input phoneme is represent by number which measure the distance of phonemes through phoneme likelihood process. next step is recognize the result through the reliability measure. By this process, we minimize the phoneme misunderstanding error caused by inaccurate vocabulary and perform error correction rate for error provrd vocabulary using phoneme likelihood and reliability. System performance comparison as a result of recognition improve represent 2.7% by method using error pattern learning and semantic pattern.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.408-410
• /
• 2006

To chase maximum power point at every moment under a conventional MPPT control method, a voltage and current coming out from PV-cell are needed to be feedbacked. So, the structure of control circuit becomes so complex and the MPPT control is in risk of control failure. In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. Especially, in case of a huge system of PV-SPE system, because the voltage coming out from PV-cell is not needed to be feed backed, this system can be operated much more safely. In this paper, the PV-SPE system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1474-1482
• /
• 2004

In this paper, we propose an approach for extracting and filtering block motion vectors using an adaptive weight function. We first extract motion vectors from a sequence of images by using size-varibale block matching and then process them by adaptive robust estimation to filter out outliers (motion vectors out of concern). The proposed adaptive robust estimation defines a continuous sigmoid weight function. It then adaptively tunes the sigmoid function to its hard-limit as the residual errors between the model and input data are decreased, so that we can effectively separate non-outliers (motion vectors of concern) from outliers with the finally tuned hard-limit of the weight function. The experimental results show that the suggested approach is very effective in filtering block motion vectors.