• Journal of The Geomorphological Association of Korea
• /
• v.18 no.2
• /
• pp.25-37
• /
• 2011

The purpose of this study is to investigate the history of phenomenon(hereinafter called mass-movement) of movement of inorganic material originated from hillslope by denudation of hillslope surrounding the watershed during Holocen period in the Chaamgol watershed(hereinafter called study watershed) uppermost stream of Maegokcheon Cheonan-si Chungnam. To do this, for the object of allivium distributed in valley bottom of study watershed, facies analysis, radiocarbon dating and grain size analysis were conducted and geomorphological analysis on study watershed conducted together. The result is like the following. It was confirmed that over around 9,100yrBP~to recent due to a few times of mass-movement occurred in time scale of 10²~10³ years, a large quantity of inorganic material is mixed in organic material layer originated from wetland formed in valley bottom of study watershed or exists between organic material layers. And it was found that in study watershed, mass-movement occurred in instable period of hillslope after the Early Holocen existed at least 8 times (M1 period~M8 period) and wetland environment formed in the stable period of hill slope existed total 4 times (W1 period~W4 period). This analysis result will be used in the future as basic material in research of Holocen climate change of Maegokcheon watershed and in restoration of denudation process of hillslope following this.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1043-1046
• /
• 1998

Aluminium based inorganic flocculants are extensively used in this country in the removal of fine particles present in the raw water for the production of drinking water. These inorganic flocculants, however, have potential hazard of high residual aluminium ions in the treated waters, which is known to be one of the reasons of alzheimer's disease. Inorganic flocculants alone are sometimes incapable of treating water when there are excessive turbidity in the raw water sources due to flooding. A polyamine type polymeric flocculant has long been used to treat raw water in the drinking water production in the European countries and United State of America. The optimum reaction conditions such as mole ratio of epichlorohydrin(EPI) to dimethylamine(DMA), reaction temperature and time for each stage for the pilot scale preparation of polyamine from EPI-DMA was studied in this work. The variation of intrinsic viscosity and flocculating efficiency in the water treatment of the synthesized polyamines were evaluated. The residual materials after polymerization reaction were analyzed by gas chromatography to study the effect of variation of reaction conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.158-163
• /
• 2011

$CuInS_2$ thin films were prepared using a sol-gel spin-coating method. That makes large scale substrate coating, simple equipment, easy composition control available. The structural and optical properties of $CuInS_2$ thin films that include less toxic materials (S) instead of Se, tetragonal chalcopyrite structure. Copper acetate monohydrate ($Cu(CH_3COO)_2{\cdot}H2O$) and indium acetate ($In(CH_3COO)_3$) were dissolved into 2-propanol and l-propanol, respectively. The two solutions were mixed into a starting solution. The solution was dropped onto glass substrate, rotated at 3000 rpm, and dried at $300^{\circ}C$ for Cu-In as-grown films. The as-grown films were sulfurized inside a graphite container box and chalcopyrite phase of $CuInS_2$ was observed. To determine the optical properties measured optical transmittance of visible light region (380~770 nm) were less than 30 % in the overall. The XRD pattern shows that main peak was observed at Cu/In ratio 1.0 and its orientation was (112). As annealing temperature increases, the intensity of (112) plane increases. The unit cell constant are a = 5.5032 and c = 11.1064 $\AA$, and this was well matched with JCPDS card. The optical transmittance of visible region was below than 30 %.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.29-43
• /
• 2011

The seasonal characteristics of atmospheric particulate matter (PM) were evaluated through the measurement of $PM_{10}$ (particles with an aerodynamic diameter of less than 10 ${\mu}m$) and $PM_{2.5}$ (particles with an aerodynamic diameter of less than 2.5 ${\mu}m$) collected in the downtown area of Iksan city over roughly two weeks in each season of 2004. During the sampling period, 54 samples of $PM_{10}$ and $PM_{2.5}$ were collected and then measured for mass concentrations of PM and its water-soluble inorganic ion species. The concentrations of $PM_{10}$ and $PM_{2.5}$ were highly variable on a daily time scale in all seasons, especially in fall. Annual concentrations of $PM_{10}$ and $PM_{2.5}$ were $54.7{\pm}21.6\;{\mu}g/m^3$ and $34.0{\pm}13.4\;{\mu}g/m^3$, respectively. The daily concentrations of the analyzed ions similarly showed a pronounced variation, although a difference between seasons existed. Among them, $SO_4^{2-}$, $NO_3^-$ and $NH_4^+$ were the most abundant ions in all seasons, contributing up to 32% of $PM_{10}$ and 39% of $PM_{2.5}$. The contribution of $SO_4^{2-}$ and $NO_3^-$ showed a seasonal variation, as $SO_4^{2-}$ was the highest during spring and summer and $NO_3^-$ was the highest during fall and winter. Non-seasalt $SO_4^{2-}$ and $NO_3^-$ were found to exist mainly as neutralized chemical components of $(NH_4)_2SO_4$ and $NH_4NO_3$ due to the high concentration of $NH_4^+$ in PM samples, which were a major form of airborne PM in all seasons. Seasonal characteristics of $PM_{10}$ and $PM_{2.5}$ in Iksan were described in relation to the temporal variations of daily concentration of PM and its inorganic ion species including inter-particle reactions.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.87-103
• /
• 2019

Nonaqueous organic electrolyte solution in commercially available lithium-ion batteries, due to its flammability, corrosiveness, high volatility, and thermal instability, is demanding to be substituted by safer solid electrolyte with higher cycle stability, which will be utilized effectively in large-scale power sources such as electric vehicles and energy storage system. Of various types of solid electrolytes, composite solid electrolytes with polymer matrix and active inorganic fillers are now most promising in achieving higher ionic conductivity and excellent interface contact. In this review, some kinds and brief history of solid electrolyte are at first introduced and consequent explanations of polymer solid electrolytes and inorganic solid electrolytes (including active and inactive fillers) are comprehensively carried out. Composite solid electrolytes including these polymer and inorganic materials are also described with their electrochemical properties in terms of filler shapes, such as particle (0D), fiber (1D), plane (2D), and solid body (3D). In particular, in all-solid-state lithium batteries using lithium metal anode, the interface characteristics are discussed in terms of cathode-electrolyte interface, anode-electrolyte interface, and interparticle interface. Finally, current requisites and future perspectives for the composite solid electrolytes are suggested by help of some decent reviews recently reported.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.9
• /
• pp.1230-1236
• /
• 2012

Fish meal grades SL1 and SL2 from Sardine (Sardinella longiceps) and NJ from Pink Perch (Nemipterus japonicas) were evaluated as a sole source of carbon and nitrogen in the medium for alkaline protease production by Bacillus pumilus MTCC 7514. The analysis of the fish meal suggests that the carbon and nitrogen contents in fish meal are sufficient to justify its choice as replacement for other nutrients. Protease production increased significantly (4,914 U/ml) in medium containing only fish meal, compared with the basal medium (2,646 U/ml). However, the elimination of inorganic salts from media reduced the protease productivity. In addition, all the three grades of fish meal yielded almost the same amounts of protease when employed as the sole source of carbon and nitrogen. Nevertheless, the best results were observed in fish meal SL1 medium. Furthermore, protease production was enhanced to 6,966 U/ml and 7,047 U/ml on scaling up from flask (4,914 U/ml) to 3.7 and 20 L fermenters, respectively, using fish meal (10 g/l). Similarly, the corresponding improvement in productivities over flask (102.38 U/ml/h) was 193.5 and 195.75 U/ml/h in 3.7 and 20 L fermenters, respectively. The crude protease was found to have dehairing ability in leather processing, which is bound to have great environmental benefits.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.137-146
• /
• 2018

Soil washing is one of the most frequently used remediation technologies for heavy metal-contaminated soils. Inorganic and organic acids and chelating agents that can enhance the removal of heavy metals from contaminated soils have been employed as soil washing agents. However, the toxicity, low removal efficiency and high cost of these chemicals limit their use. Given that humic substance (HS) can effectively chelate heavy metals, the development of an eco-friendly, performance-efficient and cost-effective soil washing agent using a nano-scale chelator composed of HS was examined in this study. Copper (Cu) and lead (Pb) were selected as target heavy metals. In soil washing experiments, HS concentration, pH, soil:washing solution ratio and extraction time were evaluated with regard to washing efficiency and the chelation effect. The highest removal rates by soil washing (69% for Cu and 56% for Pb) were achieved at an HS concentration of 1,000 mg/L and soil:washing solution ratio of 1:25. Washing with HS was found to be effective when the pH value was higher than 8, which can be attributed to the increased chelation effect between HS and heavy metals at the high pH range. In contrast, the washing efficiency decreased markedly in the low pH range due to HS precipitation. The chelation capacities for Cu and Pb in the aqueous phase were determined to be 0.547mmol-Cu/g-HS and 0.192mmol-Pb/g-HS, respectively.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.601-606
• /
• 2014

Lab scale experiment study was carried out for biological treatment process development in shipboard. SBR(Sequence Batch Reactor) process with BM(Beneficial Microorganisms) was investigated for practical application on shipboard sewage treatment. From the results it was suggested that SBR process with BM might be a suitable process in terms of harmful materials removal. By adding BM to SBR system, the useful species of microorganisms and EPS(Extracellar Polymetric Substances) in sludge was increased. It was found that the biodegrability and harmful organic compounds like VOCs and harmful inorganic compounds like heavy metals. was reduced over 70%. As far as reclamation water is considered, this process is very advantageous to special environments such as cruise ships, because the method of adding BM makes it unnecessary to add other facilities on the SBR system.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.102-108
• /
• 2008

At the University of Maine, a hemicellulose pre-extraction technology is now being investigated to improve pulp yields, reduce the organic and inorganic load for liquor recovery, and create a feed stream for the generation of new biomaterials. It is important to understand the composition of unextracted wood, extracted wood, and pulping extracts in the design of an economically viable pilot-scale ethanol plant. For analysis of wood pulp composition, the total analytical mass balance closure was 100.6, 100.3, and 81.6% for unextracted chips, extracted chips, and pulping extracts from HPLC-H column analysis. Meanwhile, the total analytical mass balance from the HPLC-P column was 97.8, 86.3, and 80.7%, respectively. This slight variability between H- and P-column results for analytical mass balance may be within the experimental error of the measurement. The data generated by this analysis are important to further design work in commercializing this process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.373-380
• /
• 1999

Consolidation settlements of soft clay are often large and potentially damaging to the structures. Currently, large-scale construction projects for airport and harbor etc. are in progress in Korea and many of these structures will be constructed on thick and soft clay layers. For this kind of ground condition, evaluation of consolidation settlement is required at every design and construction stages, and the magnitude of secondary compression appears to be larger than expected. Generally, the magnitude of secondary compression is evaluated by laboratory and in-situ consolidation tests or by empirical $C_{a/}$ $C_{c}$, relationship. The use of empirical value $C_{a/}$ $C_{c}$ may be economical, fast and powerful tool in estimating secondary consolidation settlement. However, the databases of the $C_{a/}$ $C_{c}$, for typical soft clays in Korea are insufficient. The purpose of this study is to investigate the relationship of $C_{a/}$ $C_{c}$ on marine clay near the southern sea in Korea. A series of incremental loading consolidation tests with measurement of pore water pressure were performed. It was found that the $C_{a/}$ $C_{c}$ of undisturbed marine clay is 0.0397. This value is similar to that proposed by Mesri and Castro(1987) on inorganic clay and silt. and silt. and silt.