• Journal of Plant Biotechnology
• /
• v.35 no.2
• /
• pp.127-132
• /
• 2008

In bioreactor cultures of plants, inoculum density is an important factor affecting growth and proliferation of the plantlets. To maximize shoot growth and proliferation of grape rootstock '5BB' in bioreactors, inoculum density varied at 15, 30, 45 and 60 single nodes in a 3-liter scale balloon type bioreactor, respectively and cultured for 40 days. Results suggested that the growth and the photosynthesis of the plantlet were greatly affected by inoculum density in the bioreactor. The inoculum density of 45 nodes resulted in the greatest growth (910.4 mg/shoot FW, 764.4 mg/root FW) followed by 30 nodes. $CO_2$ assimilation rate, stomatal conductance, transpiration rate of the plantlet were also highest at the inoculum density of 45 nodes. Significant reduces in shoot and root growth (426.5 mg/shoot FW, 248.4 mg/root FW) were observed at the inoculum density of 60 nodes. When the inoculum density decreased by 15 nodes, plantlets were malformed due to hyperhydricity, resulting in the highest transpiration rate and the lowest $CO_2$ assimilation rate. The plantlets stressed by the inoculum density at 15 nodes and 60 nodes showed larger number and irregular shape of stomata compared to the plantlets inoculated with 45 nodes.

• The Plant Pathology Journal
• /
• v.27 no.4
• /
• pp.333-341
• /
• 2011

Two antifungal bacteria were selected from forest soils during the screening of microorganisms antagonistic to Cylindrocarpon destructans, a cause of ginseng root rot. The antifungal bacteria were identified as Bacillus subtilis (I4) and B. amyloliquefaciens (yD16) based on physiological and cultural characteristics, the Biolog program, and 16S rRNA gene sequencing analyses. Antagonistic activity of both bacterial isolates to C. destructans increased with increasing temperature. More rapid starch hydrolytic activity of the bacteria was seen on starch agar at higher temperatures than at lower temperatures, and in the higher density inoculum treatment than in the lower density inoculum treatment. The bacterial isolates failed to colonize ginseng root the root tissues inoculated with the bacteria alone at an inoculum density of $1{\times}10^6$ cfu/ml, but succeeded in colonizing the root tissues co-inoculated with the bacteria and C. destructans. Scanning electron microscopy showed that the pathogen was damaged by the low-density inoculum treatment with the bacterial isolates as much as by the high-density inoculum treatment. Both bacterial isolates were more effective in reducing root rot when they were treated at a concentration of $1{\times}10^6$ cfu/ml than at $1{\times}10^8$ cfu/ml. Also, only the former treatment induced prominent wound periderm formation, related to structural defense against pathogen infection. The results suggest that the bacterial antagonists may have high potential as biocontrol agents against ginseng root rot at relatively low-inoculum concentrations.

• Journal of Plant Biotechnology
• /
• v.6 no.4
• /
• pp.265-268
• /
• 2004

Cell growth and ginseng saponin production by large-scale suspension (bioreactor) cultures of Panax ginseng were investigated under various inoculum sizes. Cell growth was low at an inoculum size of 40 g FW/L, and the maximum cell growth was obtained with increasing inoculum size up to 100 g FW/L. The cell density of 333 g FW/L and 12.7 g DW/L was obtained at inoculum size of 100 g FW/L after 30 days of cultivation. Maximum saponin production of $4.40\;\cal{mg/g}$ DW was achieved at 60 g FW/L of inoculum size. Thus, inoculum size 60 g FW/L was suitable for optimum biomass accumulation as well as saponin production during bioreactor cultivation of ginseng suspension cells.

• Korean Journal Plant Pathology
• /
• v.14 no.6
• /
• pp.594-597
• /
• 1998

The optimal quantity of inoculum was determined to screen resistance of garlic cultivars against Sclerotium cepivorum and 30 cultivars was tested. The growth of the pathogen in detached roots, Disease incidence was increased when the inoculum density was raised form 10 to 100 sclerotia. The optimal inoculum density to differentiate resistance or susceptibility of garlic cultivars was seemed to be 50 sclerotia. The cultivars collected from England, Japan, Nepal and Turkey, and cultivars such as common red, PI1356104 and PI135693 were less than the other cultivars in their disease incidence. The growth of S. cepivorum in detached roots varied from 23 to 33 mm according to garlic cultivars. There was no relationship between the disease incidence and the growth in detached roots. The sclerotial germination was increased significantly when root extract was extract was added. The addition of only distilled water resulted in 13% germination, but the addition of 0.25 g of root extract in 100 ml distilled water resulted in more than 85% germination. There was no difference in the stimulation of sclerotial germination among cultivars which showed different resistance.

• Journal of Plant Biotechnology
• /
• v.36 no.1
• /
• pp.7-12
• /
• 2009

This study was conducted to establish the optimal suspension culture system for both the propagation of embryogenic cells (ECs) and the induction of somatic embryos (SEs) of Kalopanax septemlobus. The proliferation rate of ECs was reduced as the inoculum density was increased; the highest rate was obtained when 0.1 g/100 ml of cells was initially inoculated. According to the analysis of cell growth pattern and cell growth cycle (G1, Sand G2/M), the cell growth started in 5 days culture initiation, grew rapidly until 15 days and then decreased gradually. Distinctive changes of the cell growth cycle by the culture periods was also observed; the growth cycle was doubled from initial 5.6% to 11.7% of S stage in 5 days culture and then reached in stable stages again. Therefore, the results indicated that a 15-day-cycle was the optimal culture period for the propagation of the ECs through the suspension culture. Furthermore, the cell inoculum density was also important for the induction of SE; more than 65% of SEs at the torpedo stage was induced by using the low level of cell inoculum (0.5 g/L), while the higher inoculum densities were rapidly reduced the proportion of SEs at that stage. Although the higher inoculum density delayed the development of SE, it did not affect the proportion of SEs at the globular and heart stage. In conclusion, this study showed that the suspension culture of the Kalopanax septemlobus ECs through the control of inoculum density was an efficient way for both the propagation of ECs and the induction of SEs, suggesting that the development of this system might help to reduce the culture period for the somatic embryo production.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.689-695
• /
• 2004

This study was investigate the occurrence of bottom rot caused by Rhizoctonia solani at the crisphead lettuce fields in Uiryeong-gun, Gyeongsangnam-do from November to December in 2003. Incidence of bottom rot on crisphead lettuce was up to 5.3% at the six plastic houses. A total of 30 isolates of R. solani were obtained from diseased leaves of plants and were tested by artificial inoculation to the host. Among them, PY-1 isolate was selected showing highly virulent on the whole plant and was identified as R. solani AG1 (IB) based on the anastomosis test, morphological and cultural characteristics. Symptoms of bottom rot by PY-1 isolate produced small dark brown, depressed and elliptical spots on the lower part of leaves in the early stage as same as at the fields, were enlarged onto the upper part of leaves later, and the infected plant wilted and ultimately died in the end. For the pathogenicity test, triturated mycelia-inoculum (A$_{550}$=1.0) of PY-1 isolate was selected the most effective inoculum showing disease incidence of 51.1% for the mycelial inoculation at pot assay. Otherwise, WSRP media-inoculum (wheat brane ： sawdust ： rice brane ： PDB media=30 g ： 10 g ： 10 g ： 100 ml, w/w/w/v) of PY-1 isolate was effectual inoculum showing disease incidence of 61.6% for soil inoculation at the plastic house. Also, in selection of density and amount of inoculum, most suitable density of triturated mycelia-inoculum and amount of WSRP media- inoculum were determined as $A_{550}$=1.0 and 40 ml, respectively. This is the first report on the pathogenicity test using by WSRP media-inoculum of R. solani PY-1 isolate for the bottom rot of crisphead lettuce.

• Journal of Life Science
• /
• v.6 no.2
• /
• pp.94-103
• /
• 1996

To understand effect of inoculum size, cell density, sucrose concentration and concentrations of MS basal on suspension culture and protoplast isolation of wild viola(Viola patrinii DC.) callus from petiole segments this experiment was conducted. In the lot of 30 mesh inoculum size, two observations were; One was that a considerable increase in the fresh and dry weight of callus was determined. Another was that the callus mass was relatively compact compared with others. A recommendable cell density was 0.4g for 20ml culture medium and the higher sucrose concentration, the higher fresh and dry weight were obtained. The dilution of MS basal salt was differently affected on fresh and dry weight; the highest fresh weight was found in 1x MS salt, while the higest dry weight was in 1/3x dilution.The addition of casein hydrolysate(3g/L) was more effective to increase of both fresh and dry weight. THe contents of protein was great in the inoculum lots with larger inoculum sizeand higher concentration of MS basal salts contenting 3g/L of casein hydrolysate and higher sucrose compared with others. The greatest protoplasts were isolated from the lot of 10 mesh size treated with 1%pectinase SE-150 and 2% cellulase YC. In general, for optimal protoplast isolation the followingconditions were recommended; 1) Use of smaller cell size cultured for 2-5 weeks, and 2) more than 5 hours incubation using the combined mixture of the enzymes with proper concentrations.

• KSBB Journal
• /
• v.28 no.6
• /
• pp.400-407
• /
• 2013

The growth characteristics and production of color pigments by Monascus strains were investigated during liquid culture, and production of monacolin K in red mold rice was carried out by solid state fermentation. Four different Monascus ruber strains were cultured in potato dextrose yeast extract broth (PDYB) media at $25^{\circ}C$ for 15 days. The high producing strain for red pigment was not corresponded to the strain for yellow pigment. Production of red pigment was high in the strain causing the fast pH change in culture broth. Production of monacolin K in red mold rice by solid state fermentation was influenced by a combination of wet cell weight and spore density in inoculum by liquid culture. Most strains showed the high production of monacolin K in red mold rice, when submerged fermentation was carried out for 5 days as inoculum for solid state fermentation. These results suggest that submerged fermentation period of inoculum have an effect on the production of monacolin K in red mold rice by solid state fermentation, and monacolin K in red mold rice could be increased by controlling the condition of submerged fermentation for inoculum.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.600-605
• /
• 1996

Optimum inoculum concentration for the production of taxol was determined in Taxus brevifolia and Taxus cuspidata cell suspension cultures. By fresh weight, 2.5, 5, 7.5, 10 g/flask of cells were inoculated and cell growth as well as taxol production were examined. In both Taxus cell cultures, the higher the inoculum concentration, the shorter the length of the lag period. The optimum inoculum concentration for taxol production was found to be 5 g/flask. To produce taxol in large quantity, utilization of proper medium was thought to be important. In case of using a production medium with 6% sucrose, taxol production was noticed. Its level reached the maximum at the 9th day of culture and decreased afterwards. However, taxol was not detected from cell cultures in growth medium.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.103.1-103
• /
• 2003

An antagonistic bacteria, Stenotrophomonas maitophilia BW-13 strain which was effectively inhibited mycerial growth of Bottom rot pathogen, Rhizoctonia solani PY-1 strain was isolated from the rhizosphere of the lettuce in Uiryeong-Gun, Gyeongsangnam-Do from 2002 to 2003. For the biological control, the most suitable inoculum and its density of pathogen, PY-1 strain ware tested prior biological control test, For the pathogenicity test, A inoculum (wheat bran)sawdust+rice bran+PDB) showing disease incidence of 100％ was selected as the most suitable inoculum, which showed more effective than B inoculum (sawdust＋rice bran＋DW) and mycelial disc. also, In selection of the amount of inoculum (40g, 50g, 60g, 70g, 80g), most suitable amount of inoculum of pathogen determined as 40g showing disease incidence of 80％. For the selection of effective microorganism to control bottom rot on lettuce, about 200 isolates were isolated from the diseased soil and lettuce leaves, and examined their antifungal activity to the pathogen on PDA. As the pots assay, BW-13 strain showed the highest control value as 90％, and followed by R-13 and R-26 strain as 80％ and 60％, respectively. Selected BW-13 isolates identified as 5. maltophilia (GeneBank accession no. AJ293473.1, 99％) by 16S rRNA sequencing. This is the first report on the biological control using by S. maltophilia to the bottom rot pathogen, Rhizoctonia solani PY-1 strain.