• Journal of Information Management
• /
• v.41 no.2
• /
• pp.47-69
• /
• 2010

Open innovation is a phenomenon that has been widely accepted by both practice and theory over the last few years. On the contrary, partner relationships have attracted little attention while the open innovation could not be emerged without the link to partners. This paper identifies and evaluates a framework for the partner relationships and open innovation processes. Based on the literatures regarding open innovation and partner relationships, we propose the framework of matrix type. We present results based on 352 open innovation cases reported during 2002-2009, and each case is classified into 5 different categories of the framework. JV-C(Joint Venture relationship & Coupled process) archetype has dominated the cases with 178 cases(50.6%) where JV-O(Joint Venture relationship & Outside-In process) follows JV-C with 124 cases(35.2%). No significant change has been found in the number of cases after 2003 when open innovation firstly suggested. However, the number sharply increases in 2009 by boom in JV-C and JV-O. These results show the importance of partner relationships and preference toward Joint Venture relationship in open innovation, while the conventional approaches has just focused on value-chain partnership. We find remarkable collaboration cases contributed by universities and government invested research centers, so the role of non-profit R&D organizations has also been discussed.

• STI Policy Review
• /
• v.7 no.1
• /
• pp.87-109
• /
• 2016

Public procurement for innovation (PPI) is a new approach in stimulating innovation, and currently attracts considerable attention from policymakers and academics. This paper discusses the rationales and perspectives of PPI in Vietnam. The rationales for public procurement for innovation policy in Vietnam compared to theoretical and international practice are discussed. From such a comparison, the paper concludes that R&D results-procurement policy in Vietnam shall be understood and implemented as regular PPI both theoretically and practically. However while designing the policy, policymakers must consider the characteristics of the STI system of the country in order to make the policy adaptable to context. The paper identifies that PPI in Vietnam can be implemented with a ready legal framework (intellectual property rights, R&D contracts, standardization, etc.), the prepared capabilities of R&D institutions, businesses, and public agencies in innovation processes, and the provision of a demand-supply network and other procurement incentives.

• STI Policy Review
• /
• v.7 no.1
• /
• pp.1-16
• /
• 2016

Technology supply has been the main thrust of the Korean government's science & technology policy, focusing on the development and acquisition of new technology in line with the catching-up strategy of economic growth and industrial development. However, new social or societal problems have become major government policy issues, heralding new innovation policy aimed to address them. Such new policy initiatives for social problem-solving present a niche where the existing system of government innovation policy process is challenged, including such processes as goal-setting, planning, implementation, project management, and evaluation. The rigidity of the existing institution of government innovation policy, however, still shapes the content and progression of innovation policy for social problem-solving. This study reviews Korean innovation policy for social problem-solving as a policy niche, and aims to clarify its challenges and opportunities. It uses a system transition framework to explain the emergence and evolution of the innovation policy niche in Korea. The main research question is to what extent and in what aspect the existing innovation policy regime shaped innovation policy for social problem-solving. The study examines the inertia of the current paradigm of innovation policies and R&D programs, and sheds light on the search for a distinctive identity for innovation policies that tackles social problems.

• Journal of Technology Innovation
• /
• v.25 no.4
• /
• pp.17-45
• /
• 2017

This article reviews studies on the societal challenge and technological innovation. Technological innovation in response to social problems is a relatively recent topic of Innovation Studies. Socially-oriented innovations and policies are different in terms of the goals, innovation processes, and ecosystems when compared with industrial innovation. This study examines the existing research that discusses science and technology innovation from the viewpoint of solving societal problems and discusses the direction of future research. This paper presents major research issues on the characteristics of innovation in societal problem solving, innovation governance, roles and ecosystem of innovators, and relationship between societal problem solving policies and other policies.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.157-175
• /
• 2012

It is difficult to evaluate the performance of process innovation of e-procurement which has large scale and complex processes. The existing evaluation methods for measuring the effects of process innovation have been mainly done with statistically quantitative methods by analyzing operational data or with qualitative methods by conducting surveys and interviews. However, these methods have some limitations to evaluate the effects because the performance evaluation of e-procurement process innovation should consider the interactions among participants who are active either directly or indirectly through the processes. This study considers the e-procurement process as a complex system and develops a simulation model based on MAS(Multi-Agent System) to evaluate the effects of e-procurement process innovation. Multi-agent based simulation allows observing interaction patterns of objects in virtual world through relationship among objects and their behavioral mechanism. Agent-based simulation is suitable especially for complex business problems. In this study, we used Netlogo Version 4.1.3 as a MAS simulation tool which was developed in Northwestern University. To do this, we developed a interaction model of agents in MAS environment. We defined process agents and task agents, and assigned their behavioral characteristics. The developed simulation model was applied to G2B system (KONEPS: Korea ON-line E-Procurement System) of Public Procurement Service (PPS) in Korea and used to evaluate the innovation effects of the G2B system. KONEPS is a successfully established e-procurement system started in the year 2002. KONEPS is a representative e-Procurement system which integrates characteristics of e-commerce into government for business procurement activities. KONEPS deserves the international recognition considering the annual transaction volume of 56 billion dollars, daily exchanges of electronic documents, users consisted of 121,000 suppliers and 37,000 public organizations, and the 4.5 billion dollars of cost saving. For the simulation, we analyzed the e-procurement of process of KONEPS into eight sub processes such as 'process 1: search products and acquisition of proposal', 'process 2 : review the methods of contracts and item features', 'process 3 : a notice of bid', 'process 4 : registration and confirmation of qualification', 'process 5 : bidding', 'process 6 : a screening test', 'process 7 : contracts', and 'process 8 : invoice and payment'. For the parameter settings of the agents behavior, we collected some data from the transactional database of PPS and some information by conducting a survey. The used data for the simulation are 'participants (government organizations, local government organizations and public institutions)', 'the number of bidding per year', 'the number of total contracts', 'the number of shopping mall transactions', 'the rate of contracts between bidding and shopping mall', 'the successful bidding ratio', and the estimated time for each process. The comparison was done for the difference of time consumption between 'before the innovation (As-was)' and 'after the innovation (As-is).' The results showed that there were productivity improvements in every eight sub processes. The decrease ratio of 'average number of task processing' was 92.7% and the decrease ratio of 'average time of task processing' was 95.4% in entire processes when we use G2B system comparing to the conventional method. Also, this study found that the process innovation effect will be enhanced if the task process related to the 'contract' can be improved. This study shows the usability and possibility of using MAS in process innovation evaluation and its modeling.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.2
• /
• pp.10-13
• /
• 2001

Workpiece materials may be relatively easy to machine by traditional methods but workpiece geometry also may be a constraint. Many shapes that are geometrically difficult to handle conventionally may be candidates for nontraditional processes. Nontraditional processes provide new opportunities for product design innovation and productivity improvements. Difficult-to-machine materials of geometric shapes difficult o produce with traditional equipment and tooling, may often be easily and cost effectively machined using nontraditional processes. Notraditional machining processes are relative newcomers o the manufacturing arena. Nontraditional chemical solutions, or even electrolytic current as the working medium rather than a conventional cutting tool or abrasive to remove or shape materials.

• IE interfaces
• /
• v.22 no.3
• /
• pp.243-251
• /
• 2009

The driving force of the manufacturing field is members' mind-set and activity. However, there is no appropriate program of change management for workers who work in the manufacturing field. Most of the small group activities were focused on the fixed tools and processes to make improvement only, not the change itself. Therefore, it was difficult to have self generating energy without actually motivating people of change. Study of IFI(Integrated Field Innovation) means change of management. This study will introduces IFI which is a new methodology of change and innovation of workers, and will describe how workers participated in the activities voluntarily. The principle of IFI is that letting employees to find the problems of the sites -anything that makes employees considering as the problem while they are working- and solve those problems through any tools own their own. Workers do not have to waste their time on bounding by unnecessary tools and processes. There are several cases that company "D" has been actually applied the IFI methodology in 2008. Through these cases, IFI proved that it was a optimized methodology for workers who work in the manufacturing field.

• Journal of the Korean Mathematical Society
• /
• v.35 no.3
• /
• pp.575-581
• /
• 1998

We are interested in random phenomena that will vary as time goes by, being interfered with by fluctuation. These phenomena are often expressed as functionals of white noise. We therefore discuss the analysis of those functionals, where the white noise is understood as a system of idealized elementary random variables. The system is, in many cases, taken to be the innovation of the given random phenomena. The use of the innovation provides a powerful tool to investigate stochastic processes and random fields in line with white noise analysis.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.1
• /
• pp.146-173
• /
• 2014

Extant studies have explained that firm's innovations including technological product and process innovations contribute to its competitive advantage and growth, thereby supporting competitiveness and growth of industry. These studies, however, have focused mainly on the role and effect of technological change that is primarily measured by the patent numbers and R&D intensity. Aside from these traditional streams, there has been growing interest on the impact by various dimensions of innovation including non-technological innovations. Apart from the discussions on the dimensions and scope of innovation, stages or processes of innovation also have been studied. Extant studies on innovation process model, however, has limited its interests in the structure of the transformation of knowledge. This study have established a comprehensive model embracing operational and financial performance to investigate the causal paths between innovation and firm performance. Using multi-level generalized linear model with path analysis, this study have found results as follows: First, the processes from innovative activities to innovation output and outcomes including operational and financial performance at firm level were verified. Secondly, the influence of innovation decreases gradually as the distance away from the direct outputs of the innovation increase in the direction of financial outcomes. Third, the effect of innovation on the sales growth rate is higher for small businesses than for medium-sized businesses. The effect of innovation on the profit rate, however, is significant only for medium-sized businesses. For large businesses, innovation has no positive significant impact on any financial performance at all. Fourth, Fourth, the appropriability of innovation has positive impacts on innovative performance, patent applications, and operational performance.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1474-1482
• /
• 2024

Objective: The experiment aimed to determine the standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in 10 brown rice samples fed to pigs, and to construct predictive models for SID of CP and AA based on the physical characteristics and chemical composition of brown rice. Methods: Twenty-two cannulated pigs (initial body weight: 42.0±1.2 kg) were assigned to a replicated 11×3 incomplete Latin square design, including an N-free diet and 10 brown rice diets. Each period included 5 d adaptation and 2 d ileal digesta collection. Chromic oxide was added at 0.3% to all the diets as an indigestible marker for calculating the ileal CP and AA digestibility. Results: The coefficients of variation of all detected indices for physical characteristics and chemical composition, except for bulk weight, dry matter (DM) and gross energy, in 10 brown rice samples were greater than 10%. The SID of CP, lysine (Lys), methionine, threonine (Thr), and tryptophan (Trp) in brown rice was 77.2% (62.6% to 85.5%), 87.5% (80.3% to 94.3%), 89.2% (78.9% to 98.9%), 55.4% (46.1% to 67.6%) and 92.5% (86.3% to 96.3%), respectively. The best prediction equations for the SID of CP, Lys, Thr, and Trp were as following, SID_CP = -664.181+8.484×DM (R² = 0.40), SID_Lys = 53.126+6.031×ether extract (EE)+0.893×thousand-kernel volume (R² = 0.66), SID_Thr = 39.916+7.843×EE (R² = 0.41), and SID_Trp = -361.588+4.891×DM+0.387×total starch (R² = 0.85). Conclusion: Overall, a great variation exists among 10 sources of brown rice, and the thousand-grain volume, DM, EE, and total starch can be used as the key predictors for SID of CP and AA.