• 한국표면공학회지
• /
• 제35권4호
• /
• pp.193-198
• /
• 2002

Alloys of XD45 (Ti45A12Nb2Mn-0.8vol%TiB$_2$) and XD47 (Ti47A12Nb2Mn-0.8vol%TiB$_2$) were oxidized between 800 and $1000^{\circ}C$ in air, and their oxidation characteristics were studied. The oxide scales consisted primarily of an outer $TiO_2$ layer, an intermediate $Al_2$$O_3$-rich layer, and an inner mixed layer of ($TiO_2$+$Al_2$$O_3$). Nb tended to present at the lower part of the oxide scale, whereas Mn at the upper part of the oxide scale. The Pt marker tests indicated that the outer oxide layer grew primarily by the outward diffusion of Ti and Mn, and the inner mixed layer by the inward transport of oxygen.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.248-254
• /
• 1997

The sulfidation behavior of a sputter-deposited amorphous coating of 69.0%Nb-16.9Ni-11.9%Al-2.2%Si (at.%) has been investigated as a funtion of temperature.(973-1173K) in pure sulfur pressure of 0.01atm. The sulfidation kinetics of the casting obyed the parabolic rate low over the whole temperature ranges studied. The stlfidation rate increased with the temperature, as expected. The sulfide scale, the composition of which was $Al_2S_3,\;NbS_2,\;Ni_{3-x}S_2\;and\;FeCrS_4$, formed on the amorphous coating was primarily bilayered. Both the outer fastgrowing non-protective 4Al_2S_3$scale and the inner slowly-growing protective $NbS_2$,/TEX> scale and the inner slowly-growing protective $NbS_2$ scale had some Fe and Cr dissolution, which evidently came from the base substrate alloy of stainless steel type 304. Belows the coating, Kirkendall void formation was noticed. Nevertheless, a dramatic improvement of sulfidation resistance was achieved by sputter-depositing Nb-2 Ni-Al-Si layer on the stainless steel 304.

• Journal of Astronomy and Space Sciences
• /
• 제32권1호
• /
• pp.1-11
• /
• 2015

Earth's magnetopause separating the fast and often turbulent magnetosheath and the relatively stagnant magnetosphere provides various forms of free energy that generate low-frequency surface waves. The source mechanism of this energy includes current-driven kinetic physical processes such as magnetic reconnection on the dayside magnetopause and flux transfer events drifting along the magnetopause, and velocity shear-driven (Kelvin-Helmholtz instability) or density/pressure gradient-driven (Rayleigh-Taylor instability) magnetohydro-dynamics (MHD) instabilities. The solar wind external perturbations (impulsive transient pressure pulses or quasi-periodic dynamic pressure variations) act as seed fluctuations for the magnetopause waves and trigger ULF pulsations inside the magnetosphere via global modes or mode conversion at the magnetopause. The magnetopause waves thus play an important role in the solar wind-magnetosphere coupling, which is the key to space weather. This paper presents recent findings regarding the generation of surface waves (e.g., Kelvin-Helmholtz waves) at the Earth's magnetopause and analytic and observational studies accountable for the linking of the magnetopause waves and inner magnetospheric ULF pulsations, and the impacts of magnetopause waves on the dynamics of the magnetopause and on the inner magnetosphere.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.189-194
• /
• 2017

Effects of gas injection scheme and rf driving current configuration in a dual turn inductively coupled plasma (ICP) system were analyzed by 3D numerical simulation using CFD-ACE+. Injected gases from a tunable gas nozzle system (TGN) having 12 horizontal and 12 vertical nozzles showed different paths to the pumping surface. The maximum velocity from the nozzle reached Mach 2.2 with 2.2 Pa of Ar. More than half of the injected gases from the right side of the TGN were found to go to the pump without touching the wafer surface by massless particle tracing method. Gases from the vertical nozzle with 45 degree slanted angle soared up to the hottest region beneath the ceramic lid between the inner and the outer rf turn of the antenna. Under reversed driving current configuration, the highest rf power absorption region were separated into the two inner islands and the four peaked donut region.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.500-502
• /
• 2008

In generally, a high pressure fuel injection pipe has been often used as a fuel supply line in automobiles or other diesel engines. Such conventional high pressure fuel injection pipe, however, has suffered from the problem that is folding and hair cracks created therein. The defects can be locally formed in the inner wall surface of the pipe at the connecting head leading to a flow path when the pipe is deformed by the heading process. In the study, in order to prevent the folding in the inner wall surface of the pipe during the heading process, FE-analysis has been used in the die design.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.286-296
• /
• 1998

Galvannealing is becomming the main stream of the coating technology applied to automobile outer and inner panels due to its low cost and easy application applied to automobile outer and inner panels due to its low cost and easy application in thick Zn coating, compared to electro galvanizing. Despite of filed up data with an experience in this field, galvannealing in thick Zn coating is getting more difficult because of the absence of Fe deposition in Zn coating. As a result, it exhibits, with different steel sheet and grain size there is a proper temperature range which is good for the tarket coating thickness of galvannealing. In case of 1,200mm wide and 0.77 mm thick extra low carbon steel with 20$mu extrm{m}$ grain size, its proper temperature range for galvannealing of one side 60g/$\textrm{m}^2$ is 470-$480^{\circ}C$.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제38권2호
• /
• pp.51-55
• /
• 2019

The structure and properties of silk polymers (fibroin and sericin) can be satisfactorily controlled by choosing a suitable silkworm variety and, hence, this parameter (i.e., silkworm variety) has attracted increasing attention. A previous study reported that the crystallinity of white colored silkworm cocoons depends on the silkworm variety. In the present study, sixteen yellow colored silkworm variety cocoons were produced and their molecular conformation and crystallinity were investigated. The conformation of the silkworm cocoons varied with the silkworm variety. Most cocoons exhibited ${\beta}$-sheet conformation, although random coil and ${\beta}$-sheet conformations co-existed in some cocoons (e.g., 21 and D90). The crystallinity of the silkworm cocoons varied with the silkworm variety and the measurement position of the cocoon (i.e., outer surface or inner surface). However, the difference in the crystallinity indices of the outer and inner surfaces comprising the cocoons varied with the silkworm variety, but was <2% for all cocoons, except for MAL.

• 복식
• /
• 제58권2호
• /
• pp.162-180
• /
• 2008

The purpose of this study is to find the basic design factors that affect the changes in body surface lines caused by lower limb movements, thereby resulting in slacks that fit well regardless of whether the human form is static or in motion. Using unmarried female university students aged 18-24 as subjects, a total of 32 body surface lines (15 body surface total lines and 17 body surface segment lines) were measured in one static and 9 movement poses, The analysis first involved the calculation of the expansion and contraction rates per body part in body surface line in 9 lower limb movements, Second, a factor analysis was conducted using the expansion and contraction rates of these changes in body surface line. The results of this study are as follows, According to the factor analysis, basic design factors that affect changes in body surface lines comprised 8 types of factors as illustrated in fig, 2-fig, 9, which explained 79.2% of total variate for the variables studied, Factor 1, comprising the lower segment of center back leg line, center front leg line and inner leg line, and lower limb girth except midway thigh girth and ankle girth below hip girth, accounted for 30.3% of total variance, Factor 2, comprising waist girth, the total and upper segment of center back leg line and center tront leg line, and front and back segment of crotch length, explained 17.4% of total variance, Factor 3, the total and upper segment of lateral leg line at the center, accounted for 56.5% of total variance in accordance with Factors 1, 2, and 3, Factor 4 was the contracting upper part of lower leg between legscye girth and midway thigh girth, Factor 5 comprised the total and upper segment of inner leg line and posterior knee girth, Factor 6 was the total crotch length, Factor 7 was the ankle girth, Factor 8 was the abdomen girth.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.83-89
• /
• 2014

목 적 : 토모테라피(Tomotherapy)와 선형가속기(Linac)를 이용한 세기조절방사선치료(IMRT) 시 환자의 정확한 위치잡이를 위해 매일 시행되는 MVCT와 CBCT의 imaging dose를 비교 평가해보고자 한다. 대상 및 방법 : 인체 모형 팬텀(Anderson rando Phantom, USA)을 Head, Thorax, pelvis의 3부위로 분류하여 촬영 부위의 중심에 $0.5{\times}0.5cm2$. 크기로 자른 GafChromic EBT3 film을 팬텀의 표면의 상, 하, 좌, 우와 팬텀의 표면에서 2cm깊이의 상, 하, 좌, 우, 중심에 위치시킨 뒤 토모테라피(Hi Art)와 Novalis Tx의 OBI를 이용하여 surface dose와 inner dose를 각각 3회씩 반복 측정한다. 측정 된 film은 RIP version6.0을 이용하여 값을 산출한 뒤 일원분산분석법을 이용하여 선량의 평균값을 산출한다. 결 과 : 인체모형팬텀을 이용하여 MVCT와 CBCT를 시행한 결과 MVCT inner dose의 측정값은 head에서 $15.43cGy{\pm}6.05$, thorax에서 $16.62cGy{\pm}3.08$, pelvis에서 $16.81cGy{\pm}5.24$로 나타났으며, CBCT inner dose는 head에서 $13.28{\pm}3.68$, thorax에서 $13.66{\pm}4.04$, pelvis에서 $15.52{\pm}3.52$의 값을 나타냈다. Surface dose의 측정 값은 MVCT 시행 시 head에서 $11.64{\pm}4.05$, thorax에서 $12.16{\pm}4.38$, pelvis에서 $12.05{\pm}2.71$로 나타났으며, CBCT의 경우 head에서 $14.59{\pm}3.51$, thorax에서 $15.82{\pm}2.89$, pelvis에서 $17.48{\pm}2.80$을 나타내었다. 결 론 : Inner dose의 경우 kV energy를 사용하는 CBCT보다 MV energy를 사용하는 MVCT에서 head에서 1.16배, thorax에서 1.22배, pelvis에 서 1.08배 높게 나타났으며, Surface dose의 경우 MVCT보다는 CBCT의 head에서 1.25배, thorax에서 1.30배, pelvis에서 1.45배 높게 측정되었다. Imaging dose는 치료 선량에 비해 작은 양이지만 daily로 시행되는 만큼 정상조직에 일정부분 영향을 미칠 것으로 생각된다. 하지만 IMRT치료를 위해서는 영상유도를 통한 IGRT가 반드시 병행되어 치료계획과 실제치료간 오차를 최소화하여야 한다. 따라서 환자가 받는 imaging dose를 최소화하기 위해서는 치료계획 시 Imaging dose를 고려하여 치료계획을 수립하거나 MVCT 촬영 시 Scan 범위를 최소화하여 시행해야 될 것으로 사료된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.391-392
• /
• 2008