• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.227-234
• /
• 2006

In this paper, we propose a window based resource reservation scheme to minimize an waste bandwidth due to resource reservation in mobile networks. Specially, this scheme decides a proper timing to reserve resource by using the number of movement, which is provided by the differentiated handoff estimation model, among inner regions. In the previous resource reservation scheme[6], it requests a resource reservation to neighboring cells as soon as a mobile host enters or creates into a cell. But, after a proper time based on the number of movements in the differentiated handoff estimation model passes, the proposed scheme requests a resource reservation to neighboring cells. Because of this reason, it can improve resource utilization on mobile networks. And, this scheme differentiates resource reservation according to a request ratio for resource reservation to each neighboring cell. Also, this scheme improves resource reservation acceptance rate and bandwidth utilization.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.237-243
• /
• 2016

Background: This study examined the relationship between interhandle distances and upper limb exertion during simply pushing and pulling of a cart with four swivel wheels, defined by a roll box pallet (RBP) in a Japanese industrial standard. Methods: Six healthy young male participants were asked to push and pull an RBP at a distance of 5.2 m under six conditions corresponding to different interhandle distances (40 cm, 60 cm, and 80 cm) and weights (130 kg and 250 kg). The upper limb exertion was studied by shoulder abduction and flexion, and elbow flexion, as well as surface electromyogram (EMG) in shoulder extensor, and elbow flexor and extensor. Participants were required to provide subjective evaluations on operability after each trial. Results: Subjective operability indicated that a narrower interhandle distance had a better operability for pushing. Interhandle distance was also related to upper limb exertion especially for pushing. A narrow interhandle distance caused smaller shoulder adduction but larger elbow flexion. The normalized EMG data revealed that muscular activity became smaller with a narrow interhandle distance in shoulder extensor. During the pulling task, elbow flexion was smaller at a narrow interhandle distance, although subjective operability and normalized EMG were not significantly varied. Conclusion: A wider interhandle distance, such as 80 cm, was not suitable in the forwardbackward movement of the RBP. Therefore, this study concluded that an interhandle distance of 40 cm would be suitable for pushing and pulling an RBP to protect the workers' hands against the risk of injury by installing inner handles.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.325-332
• /
• 2001

The vestibular system located in the inner ear controls reflex body posture and movement, It has the semicircular canals sensing an angular acceleration and the otolith organs sensing a linear acceleration. With this organic signal, medical doctor decide if a person has disease or not. To obtain this data, a precision stimular system is considered. Robust control is needed to obtain eye signals induced by off-vertical axis rotation because of an unbalanced load produced by tilting the axis of the system upto 30 degrees. In this study, off-vertical axis rotatory system with visual stimulation system are developed. This system is consisted of head mounted display for generating horizontal, vertical, and three dimensional stimulus patterns. Furthermore wireless recording system using RF modem is considered for noiseless data transmission. Detailed data was described.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.145-150
• /
• 2018

In the machine tool spindle, various tasks ranging from roughing to finishing must be possible, and the functions of constant speed movement or rotation positioning must be performed. Therefore, there are many variables to be considered in the spindle design. The Swiss Turn Type spindle automatic lathe is a good machine tool for working pins with thinner shafts than a fixed automatic lathe. The Swiss Turn Type spindle is mainly used for precision machining of small products, so the machining precision should be high. The maximum outer diameter limit shall be Ø32 and the inner diameter limit shall be Ø6. In this study, the static and dynamic characteristics of the SCM440 material used in the spindle type automatic lathe were analyzed by applying it to the Swiss turn type spindle automatic lathe. Numerical analysis was used to obtain optimal design technique with high speed and high accuracy considering the factors affecting the static and dynamic characteristics of the spindle.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.130-136
• /
• 2020

Fabrication of complete denture with suction mechanism was introduced to enhance the retention and stability of denture by sealing around the denture border by forming negative pressure on the inner side of denture base during functional movement such as swallowing or masticating. Mandibular suction dentures reduce denture dislodging force during opening by taking preliminary impression without pressure on retromolar pad area in rest position. In this case, fabrication of complete denture using suction mechanism for an edentulous patient with severe alveolar bone resorption allowed us to clinically enhance retention and stability of denture and improve satisfaction of patient.

• Journal of the Korean Society of Costume
• /
• v.25
• /
• pp.5-20
• /
• 1995

The fashion of late Yi dynasty had explored a possibility of new fashional beauty from its own experiences throughout the history of Korean fashion excluding any interference of foreign fashions, and brought out some characteristics ; first, the aesthetical value focused on the more human fashion resulted in the exposure of waist. This aesthetical change in the fashion of late Yi dynasty produced out results as follows ; the length and width of jacket became short and narrow maintaining the basic form, while the width of skirt became increased to be contrasted exceptionally with the upper coat. This mode of fashion reveals the transitional movement from the emphasis on balance to that on unbalance in the late period of Yi dynasty. But regarding the fact that the proportional change by the ways of putting on skirt became to be similar to the golden ratio, we can see many examples throughout the folk paintings by Shin Yun bok, we find that the fashional beauty of that age pursued ideal harmony and unity all the time being in spite of its tendency toward non-refinement. Second, we see another peculiarity in the mode of woman's fashion from the paintings by Shin Yun-bok who always depicted the hu-man nature frankly. For example, the jacket became shorter to emphasize lady's slim waist, and underwears began to be exposed after the upper part of skirt had been to expose lady's waist while the bottom line pulled up highter than before. Thus, as the function of robe had changed from a mere means of covering into an expression of beauty, the fashion of late Yi dynasty began to express a perfectly new beauty possessing an erotic mood and sensu-ality of a woman, which was its inner aesthetic need. Third, this emergence of new fashional beauty made the mental value of man and the aesthetic views of that time quite different from the previous ones, and finally there came various expressions of a new beauty. There-fore, the woman's fashion of late Yi dynasty is noted for the exposure and emphasis on the body line of a woman after the aesthetic view-point had changed of time toward pragmatism and humanism, while upholding the traditions of Korean clothes and pride for the nation. And our ancestors realized very Korean fashional beauty by pursuing the expressional ways of gentle, indirect emphasis upon the feminine and natural beauty to exclude and ar-tificial, direct and straightforward exposures and images.

• Journal of the Economic Geographical Society of Korea
• /
• v.2 no.1_2
• /
• pp.27-45
• /
• 1999

Recently, the changes of industrial location can be explained as the concentration of small and medium manufacturing firms or high technology industries by industrial restructuring in Seoul metropolitan area, and the dispersion of large companies'branch plant into the peripheral region in Korea. Particularly deindustrialization is progressing in the inner city and manufacturing firms disperse into the outer city in Seoul metropolitan area. This study reviews on the structural perspectives for the changing industrial location factors. The development of capitalism organizes economic spacial structures and Its characteristics can be reasons which can raise changes in industrial location. Korean economy rapidly grew in the movement process of international capital. And capital accumulation by continuous economic growth is raising the spatial division of labor or the spatial difference and inequality on land price, wages. the base of labor reproduction. Therefore, these factors are the most reasons to raise the changes of industrial location in Korea. Hereafter the study on these factors, that is, in relation to sociocultural structure and land use structure have to be progress more concretely.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.511-516
• /
• 2004

As a preliminary study on the sediment flux, concentrations of suspended particulate matter and current speeds were measured at three inlets of Gwangyang Bay during one tidal cycle of a spring tide of March 2003. The suspended sediment flux rate $(g/m^{2}/s)$ at the mouth of Seomjin River (St. K1) was observed to be higher throughout surface layer during ebb tide $(14.3\;g/m^{2}/s)$ and throughout near-bottom layer during the flood tide $(23.2\;g/m^{2}/s),$ resulting in a net upstream-ward transport of$0.9{\times}10^{3}kg/m$ during 13 period. At the inlet toward Yeosu Bay (St. K2), a relatively low rate ($(5.0-6.7\;g/m^{2}/s)$ of sediment flux occurred throughout the water column compared to St. K1, with a depth-integrated net transport of $5.6{\times}10^{3}kg/m$ toward the outer reaches of Gwangyang Bay inlet. At St. K3 located at Gwangyang Bay-side of Noryang Strait, the outward flux toward the Jinju Bay was observed to be dominant during the flood tide $(16.2-23.2\;g/m^{2}/s)$, especially through the mid and near bottom layer, compared to the inward flux throughout the whole water column during the ebb tide $(13.1-19.7\;g/m^{2}/s).$ The net transport at St. K3 was calculated to be $4.0{\times}10^{3}kg/m$ toward the outside of Gwangyang Bay. The outward net transport of suspended sediment at all three inlets seems to be consistent with a trend of bottom sediment texture, which suggests a net movement of sediment from a relatively coarse and poorly sorted inner-bay toward a relatively fine and better sorted outer-bay environment.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.259-267
• /
• 2011

Although having only become a unified nation in latter 19th century, Germany saw a movement centered on intellectuals to find culture via mental revolution after experiencing much confusion amidst rapid urbanization and materialism. Having expressed as they are such psychological states as anger, sorrow, repression, etc., which arise in reality, by remaining faithful to instinctive sensibility, the form naturally becomes distorted or exaggerated and continues on the tradition of romanticism of a powerful, dark, and introverted atmosphere. Having been discontinued after being branded as 'decadent art' by the Nazis of Fascism, expressionist art has returned in latter 20th century mainly centered on Germany, and this merits our attention. While neo expressionists actively use various objets and media, they metaphorically express hope about Germany's culture and society by again placing on the screen figures, myths, and symbols using rough brush touch, rich colors, etc., which past expressionists enjoyed using to represent the inner world of humans. As such, by examining expressionism, which can be seen as the origin of neo expressionism, we will discover the context in which these people conform to Germany's traditional romanticism and how they inherited and developed it.