• 터널과지하공간
• /
• 제34권2호
• /
• pp.89-103
• /
• 2024

처분 환경에서는 혐기성 부식, 방사선 분해, 미생물 분해와 같은 다양한 원인으로 처분용기와 완충재의 경계면에서 기체가 발생할 수 있다. 기체의 발생 속도가 완충재 내부에서의 확산 속도보다 빠를 경우, 완충재 내부에 기체가 압축되어 공극 압력이 증가함으로써 완충재의 물리적 손상을 유발할 수 있다. 특히 이때 발생한 균열을 통해 기체돌파현상이라 불리는 급격한 기체 이동 현상과 함께 방사성 핵종이 누출될 가능성이 있다. 따라서 처분 시스템의 안전성 평가를 위해서는 이러한 기체 발생 및 이동 현상에 대한 이해가 필수적이다. 이 연구에는 완충재 내 기체 이동 현상 규명을 위한 시험 장치를 문헌 연구를 통해 구축하고, 이를 활용하여 한국형 처분 시스템의 완충재 후보 물질 중 하나인 Bentonile WRK (Clariant Ltd.) 분말로 제작한 압축 시료에 대한 기체 주입 시험을 수행하였다. 시험 결과, 완충재 내 기체돌파현상 발생 지점에서 일반적으로 관측되는 특성인 응력 및 압력의 급격한 상승 경향이 뚜렷하게 관찰되었다. 또한 완충재 팽윤으로 기인한 응력의 범위는 4.7~9.1 MPa이었으며, 기체 유입 압력으로 간주할 수 있는 기체돌파현상 발생 시의 압력은 약 7.8 MPa로 확인되었다. 구축된 장치는 향후 완충재의 초기 물성 및 기체 주입 실험 초기 조건에 대한 데이터베이스 구축을 위한 다양한 실험에 활용할 수 있을 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.158-161
• /
• 2004

We have studied a lifetime in organic light-emitting diodes depending on buffer layer. A transparent electrode of indium-tin-oxide(ITO) was used as an anode. And the cathode for electron injection was LiAl. Phthalocyanine Copper(CuPc), Poly(3,4-ethylenedioxythiophene):poly (PEDOT:PSS), or poly (9-vinylcarbazole)(PVK) material was used as a buffer layer. A thermal evaporation was performed to make a thickness of 40nm of TPD layer at a rate of $0.5{\sim}1\;{\AA}/s$ at a base pressure of $5{\times}10^{-6}\;torr$. A material of tris(8-hydroxyquinolinate) Aluminum($Alq_3$) was used as an electron transport and emissive layer. A thermal evaporation of $Alq_3$ was done at a deposition rate of $0.7{\sim}0.8[{\AA}/s]$ at a base pressure of $5{\times}10^{-6}\;torr$. By varying the buffer material, hole injection at the interface could be controlled because of the change in work function. Devices with CuPc and PEDOT:PSS buffer layer are superior to the other PVK buffer layer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.661-662
• /
• 2009

• 한국전자파학회논문지
• /
• 제22권3호
• /
• pp.399-405
• /
• 2011

본 논문에서는 130 nm RF CMOS 공정을 이용하여 77 GHz 자동차용 레이더 센서에 응용 가능한 Q-band LC 전압 제어 발진기(Voltage Controlled Oscillator: VCO)와 주입 잠금(injection locking) 버퍼를 설계한 결과를 보인다. LC 탱크의 위상 잡음 특성 개선을 위해 전송선을 이용하였고, 버퍼는 능동 소자 교차 결합쌍(cross-coupled pair)의 부성 저항(negative resistance)단을 이용해 발진 유무에 관계없이 높은 출력 전력을 가지도록 설계하였다. 측정된 위상 잡음은 1 MHz 오프셋 주파수에서 -102 dBc/Hz이며, 주파수 조정 범위는 34.53~35.07 GHz이다. 또한, 모든 주파수 조정 범위에서 출력 전력은 4.1 dBm 이상의 값을 가진다. 제작된 칩의 사이즈는 $510{\times}130\;um^2$이며, 1.2 V 바이어스 전압에서 LC 전압 제어 발진기가 10.8 mW, 주입 잠금 버퍼가 50.4 mW의 전력 소모를 가진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1003-1006
• /
• 2003

We have investigated the effect of hole-injection buffer layer and cathodes in organic light-emitting diodes u sing poly (3,4-ethylenedioxythiophene) : poly (stylenesulfonate) (PEDOT: PSS) in a device structure of $ITO/PEDOT:PSS/TPD/Alq_3/Cathode$. Polymer PEDOT:PSS buffer layer was made using spin casting method. Current-voltage, luminance-voltage characteristics and efficiency of device were measured at room temperature with a variation of cathode materials. The device with LiF/Al cathode shows an improvement of external quantum efficiency approximately by a factor of ten compared to that of Al cathode only device. Our observation shows that the energy barrier-height in cathode side is important in improving the efficiency of the organic light-emitting diodes.

• 한국광학회지
• /
• 제20권3호
• /
• pp.182-188
• /
• 2009

완충용액과 분석시료의 확산으로 발생하는 측정 오차를 최소화하기 위하여 공기주입 장치와 공기제거 장치를 설치한 표면 플라즈 몬 공명 타원계측기(surface plasmon resonance ellipsometer: SPRE)를 새로이 제안하고 이를 제작하였다. SPRE에서 완충용액과 분석시료간의 상호 확산은 분석시료의 농도를 변화시켜 굴절률 측정에 영향을 주고, 이 결과 생체분자 물질의 접합 특성이 명확하게 나타나지 않는다. 이러한 SPRE의 측정 장치에 공기를 주입하는 장치를 추가로 설치하여 두 용액의 확산을 막고, 특히 불필요한 공기가 채널 내부로 유입되어 생기는 잡음신호를 없애기 위하여 공기제거 장치를 사용함으로써 신뢰성 있는 SPRE의 측정 결과를 얻을 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.455-461
• /
• 2007

The electric current of a flow injection type enzyme-sensor was measured to confirm the stable operating conditions of the sensor. The current of the sensor was decreased as the buffer solution velocity increased. Under the limitation of the cycle time to be below 10 minutes, the effective ranges of the buffer solution velocity were suggested $0.10{\sim}0.26$, $0.12{\sim}0.24$, $0.1{\sim}0.25$ and $0.05{\sim}0.10\;cm/s$ of 1.0, 1.4, 2.4 and 3.4 mm of the electrode diameters, respectively. As the reaction time of the enzyme and the substrate was increased, the current was decreased because of the dilution between the sample and buffer solution. Therefore, it could be recommended that the reaction time was able to be selected as shortly as possible in consideration of the total cycle time. As the result of the experiments using a different volume ratio of the enzyme to substrate, it was concluded that the substrate had to be mixed with the same amount of the enzyme. The current have increased remarkably in proportion to the electrode diameter under 0.1 cm/s of the buffer solution velocity but there was no difference over 0.1 cm/s of the buffer solution velocity. The cross type arrangement of the electrode was highly suggested for application and machining of the sensor.

• 한국양식학회지
• /
• 제12권1호
• /
• pp.71-77
• /
• 1999

The potential utility of injection media (sucrose, PEG, and liposome) was demonstrated for direct gene transfer into olive flounder (Paralichthys olivaceus) muscles. Based on the use of sucrose (final cone. 20%), PEG 8,000 (final cone. 10%) or liposome (twice us of DNA injected), the present injection strategy significantly improved the level of transgene expression as well as persistent duration of expression. The increased amounts of expression in DNA injection with sucrose, PEG, and liposome were as high as from 2.1 to 4.9-folds of conventional TE-based DNA injection. The best result was obtained from injections of liposome-encapsulated DNA in which the expression was detectable at least 32 days after injection when compared to only 8-16 days from TE-based injections.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.43-48
• /
• 2001

The stability and efficiency of organic light emitting devices are the most critical problems to be solved. The devices based on tris-8-(hydroxyquinoline) aluminum ($Alq_3$) and N,N-diphenyl-N,N-bis(3-methylphenyl)-1, 1-biphenyl-4,4-diamine (TPD) were used to study the effects of buffer layers on their characteristics. We have investigated the characteristic effects of CuPc (copper phthalocyanine) and pentacene buffer layers on the device characteristics, the (5${\sim}$20 nm thick) CuPc layers and the (10${\sim}$20 nm thick) pentacene layers were deposited. Efficiency was slightly improved and the turn-on voltages of the devices with the buffer layers were observed to have lower values than those of the devices without the buffer layers. It is believed that this result is attributed to the improvement of hole injection capability through the buffer layers into hole transport layer (HTL). We have also studied the atomic force microscopic images of the TPD layers deposited on the buffer layer and the bare ITO.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.534-537
• /
• 2002

We have studied conduction mechanism that is interpreted in terms of space charge limited current (SCLC) region and tunneling region. The OLEDs are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris (8- hydroxyquinolinoline) aluminum(III) $(Alq_3)$ as an electron injection and transport and emitting later, copper phthalocyanine (CuPc) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and poly(vinylcarbazole) (PVK) as a buffer layer respectively. Al was used as cathode. We manufactured reference structure that has in ITO/TPD/$Alq_3$/Al. Buffer layer effects were compared to reference structure. And we have analyzed out luminance efficiency-voltage characteristics in ITO/Buffer layer/TPD/$Alq_3$/Al with buffer-layer materials.