• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.249-252
• /
• 2002

This model is the daily streamflow model of the Korean watersheds has been developed to simulate the daily streamflow with the data of daily rainfall and pan evaporation. Parameters of this model are the water balance parameters composed Umax, Lmax, FC, CP, and CE and the routing parameters composed $U_i,\;k_1\;and\;k_2$. Among these parameters, CE value is applied one fixed value during the year and coefficient of initial ion K is empirically determined by 0.2. The object of this research is to improve the DAWAST model by application of the monthly value of CE for evapotranspiration and the revised K value for the initial abstraction.

• International Journal of Reliability and Applications
• /
• v.16 no.2
• /
• pp.55-79
• /
• 2015

It is well known that using any additional information in the estimation of unknown parameters with new sample of observations diminishes the sampling units needed and minimizes the risk of new estimators. There are many rational reasons to assure that the existence of additional information in practice and there exists many practical cases in which additional information is available in the form of target value (initial value) about the unknown parameters. This article is described the problem of how the prior initial value about the unknown parameters can be utilized and combined with classical Bayes estimator to get a new combination of Bayes estimator and prior value to improve the properties of the new combination. In this article, two classes of Bayes-shrinkage and preliminary test Bayes-shrinkage estimators are proposed for the scale parameter of exponential distribution. The bias, risk and risk ratio expressions are derived and studied. The performance of the proposed classes of estimators is studied for different choices of constants engaged in the estimators. The comparisons, conclusions and recommendations are demonstrated.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.8-13
• /
• 2018

The light weight composite materials have been replacing in high performance structures. The object of this study is to examine the effects of the initial crack location about a delamination in a PVC foam cored sandwich composite that is used for the strength improvement of structures. The initial crack location and fiber laminates thickness were changed with several types. The MMB specimen was used for evaluating the fracture toughness and crack behaviors. The material used in the experiment is a commercial twill carbon prepreg in CFRP material and Airex in PVC foam core. Sandwich laminate composites are composed by PVC foam core layer between CFRP face sheets. The face sheets were fabricated as 2 types of 5 and 8 plies. The initial cracks were located in a PVC form core and the interface of upper CFRP sheet. From the results, the crack initiation was affected with the location of the initial crack inserted in the PVC foam core. Among them, the initial crack at 1/3 of the upper part of the PVC foam core was the most rapid progression. And the critical energy release rate was $0.40kJ/m^2$, which is the lowest value when the initial crack was inserted into the interface between a PVC foam core and CFRP laminated with 5 plies. Meanwhile, the highest value of $1.27kJ/m^2$ was obtained when the initial crack was located at the center line in case of the 8 plies.

• Korean Journal of Radiology
• /
• v.22 no.5
• /
• pp.714-724
• /
• 2021

Objective: To evaluate the value of ¹⁸F-fluorodeoxyglucose PET/MRI added to contrast-enhanced CT (CECT) in initial staging, assessment of resectability, and postoperative follow-up of biliary tract cancer. Materials and Methods: This retrospective study included 100 patients (initial workup [n = 65] and postoperative follow-up [n = 35]) who had undergone PET/MRI and CECT for bile duct or gallbladder lesions between January 2013 and March 2020. Two radiologists independently reviewed the CECT imaging set and CECT plus PET/MRI set to determine the likelihood of malignancy, local and overall resectability, and distant metastasis in the initial workup group, and local recurrence and distant metastasis in the follow-up group. Diagnostic performances of the two imaging sets were compared using clinical-surgical-pathologic findings as standards of reference. Results: The diagnostic performance of CECT significantly improved after the addition of PET/MRI for liver metastasis (area under the receiver operating characteristic curve [A_z]: 0.77 vs. 0.91 [p = 0.027] for reviewer 1; 0.76 vs. 0.92 [p = 0.021] for reviewer 2), lymph node metastasis (0.73 vs. 0.92 [p = 0.004]; 0.81 vs. 0.92 [p = 0.023]), and overall resectability (0.79 vs. 0.92 [p = 0.007]; 0.82 vs. 0.94 [p = 0.021]) in the initial workup group. In the follow-up group, the diagnostic performance of CECT plus PET/MRI was significantly higher than that of CECT imaging for local recurrence (0.81 vs. 1.00 [p = 0.029]; 0.82 vs. 0.94 [p = 0.045]). Conclusion: PET/MRI may add value to CECT in patients with biliary tract cancer both in the initial workup for staging and determination of overall resectability and in follow-up for local recurrence.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.483-489
• /
• 2010

Biodiesel has attracted great attention as an alternative renewable energy source for the replacement of petroleumbased diesel fuel, yet its high production cost due to expensive oil feedstock remainsas the major economical obstacle. In this study, we investigated catalysts and reaction conditions for the acid catalyzed pre-conversion of free fatty acid (FFA) to fatty acid methyl ester (FAME) in cheap low-grade oils of high acid value. The NaOH base catalyzed reaction of vegetable oil of the initial acid value of 2 mg KOH/g led to a high FAME conversion above 95.4%, but the conversion abruptly decreased at higher initial acid values. This base catalyzed reaction was practically ineffective displaying the FAME conversion below 15% even at the initial acid value of 10 mg KOH/g by the severe saponification side reaction. Among the various catalysts studied for the pre-conversion of FFA to FAME, Amberlyst-15 was the most effective in reducing the acid value, and the optimum reaction condition identified was $65^{\circ}C$ with oil to methanol ratio of 1:3 and catalyst concentration of 15% (w/w). As the results, great enhancements in the overall biodiesel conversion were achievable via a consecutive reaction of the acid catalyzed FFA pre-conversion to FAME under the optimal condition obtained with Amberlyst-15 followed by the NaOH base catalyzed reaction, far above the extent which was obtainable by the single NaOH catalyzed reaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.752-757
• /
• 2003

Recently, 3D structure recovery through self-calibration of camera has been actively researched. Traditional calibration algorithm requires known 3D coordinates of the control points while self-calibration only requires the corresponding points of images, thus it has more flexibility in real application. In general, self-calibration algorithm results in the nonlinear optimization problem using constraints from the intrinsic parameters of the camera. Thus, it requires initial value for the nonlinear minimization. Traditional approaches get the initial values assuming they have the same intrinsic parameters while they are dealing with the situation where the intrinsic parameters of the camera may change. In this paper, we propose new initialization method using the minimum 2 images. Proposed method is based on the assumption that the least violation of the camera’s intrinsic parameter gives more stable initial value. Synthetic and real experiment shows this result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.48-57
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of homogeneous charge methane-air mixture under various initial pressure, excess air ratio and ignition times in quiescent mixture. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer and flame propagation acquired by ICCD camera were used to investigate the effect of initial pressure, excess air ratio and ignition times on pressure, combustion duration, flame speed and burning velocity. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to near 0 value gradually after 3 seconds. Combustion duration, flame speed and burning velocity were observed to be promoted with excess air ratio of 1.1, lower initial pressure and ignition time of 300ms.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.1-7
• /
• 2008

The primary aim of the paper is to solve an unstable axisymmetric initial value problem of wave propagation when given initial data that is deteriorated by noise such as measurement error. To overcome the instability of the problem, Tikhonov's regularization, known as a non-iterative numerical regularization method, is introduced to solve the problem. The L-curvecriterion is introduced to find the optimal regularization parameter for the solution. It is confirmed that fairly stable solutions are realized and that they are accurate when compared to the exact solution.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1150-1155
• /
• 1990

This paper proposes an optimal redundancy resolution of a kinematically redundant manipulator while considering homotopy classes. The necessary condition derived by minimizing an integral cost criterion results in a second-order differential equation. Also boundary conditions as well as the necessary condition are required to uniquely specify the solution. In the case of a cyclic task, we reformulate the periodic boundary value problem as a two point boundary value problem to find an initial joint velocity as many dimensions as the degrees of redundancy for given initial configuration. Initial conditions which provide desirable solutions are obtained by using the basis of the null projection operator. Finally, we show that the method can be used as a topological lifting method of nonhomotopic extremal solutions and also show the optimal solution with considering the manipulator dynamics.

• Journal of the Korean Ceramic Society
• /
• v.20 no.1
• /
• pp.55-62
• /
• 1983

the preliminary work on the prepartion of fine hydroxyapatite powder and the synthesis of dense hydroxyapatite ceramic from the powder were investigated for the development of artificial bone and tooth materials for implants. The effects of the process variables such as compositions of the raw materials the initial pH of the solutions and sintering temperature on the physical properties were investigated in order to determine the optimum conditions for the fabrication of tooth implant material. As the initial pH of the solutions was increased in the range of 10-11.6 the initial particle size of precipitates was decreased thus the sinterability of precipitates was improved. It was found that the composition of calcium rich of 1.75 in Ca/P mole ratio exhibited better sinterability and mechanical strength of the apatite ceramics for example the highest value of Vicker's hardness obtained from the compositions of 1.75 in Ca/P mole ratio was 764±30 Kg/mm2 compared to the maximum value of 600 kg/mm2 obtained from the compositions of 1.67 in Ca/P mole ratio.