• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.174-177
• /
• 2004

The nickel-based alloy Nimonic 80A possesses strength, and corrosion, creep and oxidation resistance at high temperature. These products are used for aerospace, marine engineering and power generation, etc. The control of forging parameters such as strain, strain rate, temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. It is necessary to understand the microstructure variation evolution. The microstructure change evolution occurs by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range $950-1250^{\circ}C$ and strain rate range $0.05-5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range $950-1250^{\circ}C$ and strain rate range 0.05, $5s^{-1}$, holding time range 5, 10, 100, 600 sec using hot compression tests. Modeling equations are developed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters of modeling equation are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of initial grain size and holding time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.285-296
• /
• 1995

Anatomical studies of sink tissues are required for better understanding the biological plant growth system and energy metabolism. Kinematics of root growth zones of two genotypes of tall fescue (Festuca arundinacea Schreb.) receiving 50 or 200 ppm N were determined. Longitudinal anatomy and cell dynamics of root growth zones were studied and calculated. The root growth zone is organized similarly to the leaf growth zone which has cell division, elongation, and maturation zones, but the root growth zone is only about 3.0 mm long compared to 25 to 30 mm for the leaf growth zone. The root cap extends about 0.4 to 0.5 mm from the apical initial, while the cell elongation zone for both cortical and metaxylem cells extends about 3.3 mm from the apical initial for both genotypes and N levels. Root cap cells elongate from an initial length of about 5$\mu{m}$ long to a final length of about 40$\mu{m}$ before being sloughed. Initial lengths of cortical and metaxylem cells were about 8.5 $\mu{m}$ and 13.0 $\mu{m}$, respectively. Elongation of cortex and metaxylem cell showed sigmoidal curves with final lengths of about 120 $\mu{m}$ for cortex cells and 650 $\mu{m}$ for metaxylem cells. Initial size and final size for both types were not affected by N level, but cell fluxes and cell elongation rates of cortical and metaxylem cells were about double in low N. Cell production rates were about 5 to 6 times higher in cortical cells than in metaxylem cells. Differences in N caused a larger change in cell production rate, duration of cell elongation, and relative cell elongation rate than did the genotypes. These data indicate that N application affects root growth longitudinally by changing cell production rate and elongation rate.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.187-193
• /
• 1997

In the weldmentsm the crack propagation rate is changed due to the residual stress. The crack propagation rate is high in the region with the residual stress. However it shows rhw same behavior with the base metal in the region that does not include the residual stress. The fatigue crack growth rate for the material with residual stresses can be predicted more precisely by using the effective stress ratio. The difference between experimental results and prediction results in the initial stage seems to be due to the redistribution of residual stresses and microstructural change.

• Korean Journal of Mathematics
• /
• v.5 no.2
• /
• pp.151-167
• /
• 1997

We estimate the interior Lipschitz norm and maximum of the solution for degenerate parabolic equations with absorption. Also obtain the growth rate of the solution $u$ in terms of time $t$. From this we show the uniqueness of solution with respect to the initial trace.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.64-71
• /
• 2018

This study was conducted to investigate the effects of light intensity and wavelength on the growth of Tetraselmis suecica and Tetraselmis tetrathele. These species were exposed to a blue light-emitting diode (LED; max=450 nm), a yellow LED (max=590 nm), a red LED (max=630 nm) and a fluorescent lamp (three wavelengths). The maximum growth rates (${\mu}_{max}$) of T. suecica and T. tetrathele under a red LED were 1.12/day and 0.95/day, respectively. Under a yellow LED, growth rates were 70% of the values for red wavelength, with low half-saturation constants (Ks). The optimum light source to ensure economically effective and productive growth in a Tetraselmis culture system (Photo-Bioreactor) would thus appear to be a three-phase culture, wherein a yellow LED is used during the lag phase and initial exponential phase to increase growth rate, followed by a red LED during the middle exponential phase to maximize growth rate, and finally a yellow LED again during the late exponential phase and stationary phase to achieve increased yield of useful bioactive substances.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.1
• /
• pp.10-15
• /
• 2002

Environmental and medium factors were investigated as basic data for optimizing DHA production when using Thraustochytrium aureum. To study the effect of environmental conditions, the rotation speed and culture temperature were changed. Plus the trend of the growth characteristics, lipid content in the biomass, and DHA content in lipids were evaluated according to various initial glucose concentrations. The biomass, lipid, and DHA analyses showed that the physiological characteristics of T. aureum were closely related with the environmental and medium conditions, as in the case of other marine microorganisms. For example, a low rotation speed of 50 rpm lowered the cell growth rate as well as the DHA content in the lipids. A low temperature had a negative effect on the cell growth, yet a positive effect on the lipid content in the biomass. Different initial glucose concentrations had no effect on the lipid content in the biomass or DHA content in the lipids, yet did affect the cell growth. Accordingly, these results show that environmental and medium factors must be synthetically considered in order to optimize DHA production when using T. aureum.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.413-420
• /
• 2020

We analyzed the growth characteristics of each cell line and acclimating substrate of Larix kaempferi plantlets regenerated from somatic embryos, with the goal of increasing the survival rate during the acclimation phase. Somatic embryos from three embryogenic cell lines (L14-66, L16-18, and L17-B4) were used, and the acclimating substrates were commercial soils for Larix species (Larix-Soil) and horticultural corps (Hort-Soil), Elle-pot, and Peat-plug. The average initial shoot and root length was shortest in L14-66 and longest in L17-B4. The average survival rate by cell line was highest (87.0%) in L17-B4 and lowest (64.3%) for L14-66. Survival rates by substrate were highest in Elle-pot (88.5%) and Peat-plug (88.9%). The initial shoot length of the L14-66 plantlets was highly correlated with survival rates in the Larix-Soil (r = 0.852), Hort-Soil (r = 0.692), and Elle-pot (r = 0.867) substrates, but not in Peat-plug with high total nitrogen content. The initial shoot length of the L17-B4 plantlets was not correlated with the survival rate in any of the substrates. The initial root length of the L14-66 plantlets was highly related to survival rates in the Larix-Soil (r = 0.986), Elle-pot (r = 0.846), and Peat-plug (r = 0.802) substrates, and the survival rate of the plantlets was higher as the initial root length was longer. The initial root length of the L17-B4 plantlets was related to survival rate only in the Larix-Soil (r = 0.896) and Elle-pot (r = 0.696) substrates. In conclusion, to increase the survival rate of plantlets, root length should be considered over shoot length, and it is recommended to use substrates with high nitrogen content, such as Peat-plug, or to add fertilizer, during the acclimating process. In addition, in order to increase the survival rate, lines with high initial growth should be developed.

• Microbiology and Biotechnology Letters
• /
• v.28 no.2
• /
• pp.105-110
• /
• 2000

Various environmental factors such as pH, temperature and initial glucose concentration were investigated for enhancing cell growth in fermentations of Phellinus linteus WI-OOl, a producer of polysaccarides with potent anticancer activities. Optimal pH and temperature were around 5.5 and $28^{\circ}C$, respectively. Relatively little variation of pH was observed ranging between 5.5 and 6.5 during the whole fermentation period. Maximum cell concentration and specific growth rate were investigated in the media containing initial glucose concentrations of 0.5%, 1 %, 2%, 3% and 4%. High initial glucose concentration enhanced biomass production but showed negative effect on specific growth rate. In bioreactor experiments with various feeding strategies, increases of 28% and 42% in final cell concentration were obtaind as compared to conventional batch process, by adopting pulse and continuous supplement of 2% glucose solution, respectively.

• Journal of Distribution Science
• /
• v.15 no.9
• /
• pp.85-93
• /
• 2017

Purpose - The volume and valence of online word-of-mouth(eWOM) have become an important part of the retailer's market success for a wide range of products. This study aims to investigate how the growth of eWOM has generated the product's final financial outcomes in the introductory period influences. Research design, data, and methodology - This study uses weekly box office performance for 117 movies released in the South Korea from July 2015 to June 2016 using Korean Film Council(KOFIC) database. 292,371 posted online review messages were collected from NAVER movie review bulletin board. Using regression analysis, we test whether eWOM incurred during the opening week is valuable to explain the last of box office performance. Three major eWOM metrics were considered after controlling for the major distributional factors. Results - Results support that major eWOM variables play a significant role in box-office outcome prediction. Especially, the growth rate of the positive eWOM volume has a significant effect on the growth potential in sales. Conclusions - The findings highlight that the speed of eWOM growth has an informational value to understand the market reaction to a new product beyond valence and volume. Movie distributors need to take positive online eWOM growth into account to make optimal screen allocation decisions after release.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.52-62
• /
• 2010

This study was carried out in the Tropical Plant Resources Research Center of Korea National Arboretum to determine the optimum edaphic environment for the growth of tropical and subtropical plants. The physicochemical properties of artificial substrates and the growth characteristics of tropical and subtropical plants were investigated. Subtropical plants exhibited a high growth rate when cultivated in a substrate of Dry Zone that had physical properties similar to those of arid native soil. Mediterranean plants showed a low growth rate when grown in a substrate of Subtropical Zone that required changes in acidity. The substrate of Tropical Zone had high organic matter and mineral contents and therefore had good physical properties:this substrate has a good environment for the stimulation of the growth of tropical plants. Our results indicate that the chemical properties such as pH and mineral contents of most artificial substrates need to be more urgently improved than their physical properties in order to ensure better growth of tropical and subtropical plants. Initial management strategies for the construction of new tropical greenhouses were formulated, and data from monitoring studies will be continuously gathered and incorporated in the manual to keep it updated.