• Applied Biological Chemistry
• /
• v.19 no.4
• /
• pp.219-226
• /
• 1976

To meet the need of protein feed and fine more efficient ways of returning waste to resources, we have carried out the study of the production of yeast for foods and feeds from the corn starch cake. The present study includes the method for acid-hydrolysis, the selection of yeast capable of utilizing hydrolyzate of the corn starch cake, and culture condition of Candida tropicalis under the liquid culture and the semisolid culture. Obtained results were as follows. 1. Hydrochloric acid was more excellent on the hydrolysis of the corn starch cake than sulfuric acid, and the yield of sugar was maximum, 57.2%, when the corn starch cake was hydrolyzed with 1.0% of hydrochloric acid at 2.0kg/cm for 30 minutes. 2. As the acid solution content was increased, more sugar was liberatedfrom the mixture, until the acid solution-substrate ratio reached 10:1. Beyond this point, no further increase was observed. To prepare the cultural medium of semisolid fermentation, a acid solution to substrate ratio of 3:1 appeared to be optimum. 3. Out of 6 yeast strains, Candida tropicalis had excellent growth on the hydrolyzate of the corn starch cake, and optimum temperature and initial pH were $30^{\circ}C$ and 6.0 respectively. 4. Optimum liquid medium of Candida tropicalis is ures 0.3%, potassium phosphate monobasic 0.15g and magnesium sulfate 0.04g in 100ml of the hydrolyzate of the corn starch cake, while optimum semisolid medium is ammonium chloride 0.4g, potassium phosphate monobasic 0.1%, magnesium sulfate 0.04%. 5. Candida tropicalis could assimilate the sugar in the hydrolyzate up to more than 88.75%, and a yield of dry yeast reached 19.13% to the corn starch cake under the liquid culture. 6. Compared to the that of the untreated corn starch cake, the cellulose content of the semisolid fermented cake decreased by 3.76% to 14.7%, whereas dry yeast contents increased by 13.89%.

• Korean Journal of Microbiology
• /
• v.46 no.2
• /
• pp.192-199
• /
• 2010

The alone and combined effects of bacteriocin produced from Enterococcus faecalis MJ-213 and potassium sorbate against the food-borne pathogenic bacteria were studied. Bacteriocin minimal inhibitory concentration (MIC) values for Staphylococcus aureus ATCC 6538 and Salmonella enteritidis ATCC 13076 were 50 and 100 ${\mu}g$/ml, respectively. Bacteriocin (100 ${\mu}g$/ml) alone was active against S. aureus and S. enteritidis, but it was lower in antimicrobial effectiveness than the combination of bacteriocin (100 ${\mu}g$/ml) with potassium sorbate (100 ${\mu}g$/ml), which reduced initial counts (6 log cycle) of S. aureus and S. enteritidis by 1 and 3 log cycle, respectively. The bactericidal activity of bacteriocin of E. faecalis MJ-213 heated at $100^{\circ}C$ for 30 min or $121^{\circ}C$ for 15 min was markedly decreased as compared with the control. Moreover, the activity of bacteriocin was completely abolished by pepsin or protease II, but not affected by ${\alpha}$-amylase or lipase. The activity of bacteriocin adjusted to pH 6.0-8.0 showed almost the same inhibition ratio compared with the bacteriocin unadjusted pH, and though the inhibition ratio against pathogenic bacteria was reduced than the control, the bacteriocin was stable at pH 4.0 or 10.0, relatively. Furthermore, the combined treatment of bacteriocin and potassium sorbate than the alone treatment of bacteriocin significantly decreased (p<0.05) the viable cell counts of S. aureus or S. enteritidis inoculated on grind beef during storage at $4^{\circ}C$.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.47-117
• /
• 1999

This study concern with the pattern of Pusan Station shopping district within Pusan City, Korea, one of the special functioned shopping district within Pusan City. This paper will serve as a part of series studies which attempt to clarify the internal structure of Pusan as a whole. Part(II) of this study deals with the functions including living related, restaurants and others. The pattern of floors, size of shops, street corners and widths of streets were also analysed. The results are as follows: 1. In terms of numbers of firms in living related function, Pusan Station shopping district is the $7{\sim}8th$ ranked central place among nine the highest centers within Pusan City. Pusan Station shopping district has not much promoted vertical spatial differentiation comparatively, and also it's intensity of land use is the lower among nine the highest centers. It is presented that intimate relationship between intensity of vertical land use and classes of central places within the city. The ratio of inns and hotels in Pusan Station shopping district is third ranked in Pusan City. And the size of inns and hotels in this area is the most largest among the nine highest ranked central places within Pusan City. These presented that the traditional characteristics of station area as a special functioned shopping district. Inns and hotels mainly located along the narrower and back street. And it forms agglomerated areas or 'an alley of inns' at the inner parts of blocks, some like a 'hidden flower'. In Korea, 'alley' means that an area of specialization gains the prestige, traditionally. 2. Restaurants mainly locate along the narrower and back streets. And agglomerated areas of restaurants coincide with the agglomerated area of drinking places. It shows that these two kinds of functions need the same locational conditions. The ratio of Chinese restaurants is the highest in the Pusan Station shopping district. It's due to the agglomerated area these kinds of restaurants at the 'China town'. 3. Pusan Station shopping district has been formed along the streets within the residential areas. It's means that this shopping district now at the initial or middle growth era in development stage of shopping areas. 4. In general, wholesales and light manufacturing are located at peripheries within shopping district. But in Pusan Station shopping district, it dose not appear these spatial pattern. It shows that this area is lower ranked central place and not much progressed in spatial differentiation. 5. Particular firms which customers and workers have stayed more longer period of time are located at the far from the first floor. This vertical spatial differentiation is similar to the horizontal sequences. 6. Firms which have more ability of rental payment are located at street comers such as banks and pharmacies. In Pusan Station shopping district commercial facilities could not invade into the second third floors at narrower streets and first floor of back streets, still now.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.59-67
• /
• 1983

An experiment on the rearing of tilapia stocked in closed recirculating tanks eliminating biological filter beds was carried out at the Fish Culture Experiment Station of the National Fisheries University of Pusan, from May 18 through October 21, 1982, and the growth rates, feed conversion, water quality, spawning prevention and space utilization efficiency were discussed. Finally discussed is the feasibility on the establishment of commercial production units. On the water quality, the water temperature ranged from $22.8^{\circ}C\;to\;29.1^{\circ}C$, and total ammonia arround 10 ppm or slightly up. Maintaining phytoplankton bloom was not successful probably because of the active consumption by the heavily stocked tilapia. Several attempts were made by changing the culture water with green water from a nearby earthen pond with results of fading-away in a couple of days. Feed conversions were relatively high ranging from 0.9 to 1.2 except for experiment 1 when the fish were not fully recovered from weakened wintering state. The feed used was partly laboratory prepared $25\%$ protein diet and mostly commercially available $39\%$ protein carp feed. Spawning was completely controlled during the experiment, resulting from density effect, which ranged from 10kg to 40.7kg per square meter with water depth of 0.5 to 0.6m. Space utilization efficiency was very high. Daily net production from the experiment division 3, which showed the highest result, was 6.206 kg per tank, which is calculated 3,235 metric tons per hectare per year, This time, water temperature ranged from 27.8 to $29.1^{circ}C$, average being $28.4^{circ}C$, and total ammonia arround 10 ppm. An estimation for the commercial set-up of the production system based on the results of experiment divisions which had initial stocking rate $15\;kg/m^2$ or up, is made. If the total facility, 8 tanks comprising $56\;m^2$ in surface area, is used for the present study, the yield would become 5,639 kg from 200 day rearing, which would be possible under double sheets vinyl house without additional heating, and it is thought feasible in the economic view point, when 10 or more units are operated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.707-714
• /
• 2005

Ingredient ratio for making nabak kimchi and the manufacturing method were standardized from the available literatures. Fermentation properties and $CO_2$ production of the nabak kimchi were investigated during the fermentation at $5^{\circ}C,\;10^{\circ}C,\;and\;20^{\circ}C$. Standardized ingredients ratio of nabak kimchi that added 100 mL of water was as follows: 45.0 g baechu cabbage, 26.9 g radish, 1.9 g green onion, 1.0 g red pepper, 1.2 g crushed garlic, 0.9 g crushed ginger, 0.7 g red pepper powder. The standardized manufacturing method of nabak kimchi was as follows: washing ingredients, cutting radish and baechu cabbage $(2.5\times2.5\times0.5\;cm)$, salting for 20 min, washing and draining, pretreatment of ingredients, dissolving red pepper powder in water, blending, mixing, and adding the water to the mixed ingredients. Fermentations at $5^{\circ}C$ for 8 days, at $10^{\circ}C$ for 3 days, and at $20^{\circ}C$ for 1 day led to the acidity levels of $0.21\%,\;0.20\%,\;and\;0.31\%$, respectively. From the relationships between optimally ripened pH and acidity, nabak kimchi showed lower acidity of $0.20\~0.25\%$ with pH $4.2\~4.5.$ Like other kinds of kimchi, the Levels of Leuconostoc sp. were high specially at later stage of fermentation at low temperature $(5^{\circ}C)$. However, the levels of Lactobacillus sp. were low at $5^{\circ}C$. Nabak kimchi produced high levels of $CO_2$ in the initial fermentation period and followed by rapid decrease of $CO_2$ production with the fermentation. From the relationships between pH and $CO_2$ content, the highest $CO_2$ contents were found pH $4.0\~4.4$, 3.8 and 3.4 at $5^{\circ}C,\;10^{\circ}C$, and $20^{\circ}C$, respectively. This fact indicated that fermentation at $5^{\circ}C$ has the highest $CO_2$ content at optimally ripened pH of 4.3 and the fermentation at lower temperature such as $5^{\circ}C$ could extend the eatable time of nabak kimchi.

• Sleep Medicine and Psychophysiology
• /
• v.4 no.1
• /
• pp.57-65
• /
• 1997

As jet lag of modern travel continues to spread, there has been an exponential growth in popular explanations of jet lag and recommendations for curing it. Some of this attention are misdirected, and many of those suggested solutions are misinformed. The author reviewed the basic science of jet lag and its practical outcome. The jet lag symptoms stemed from several factors, including high-altitude flying, lag effect, and sleep loss before departure and on the aircraft, especially during night flight. Jet lag has three major components; including external de synchronization, internal desynchronization, and sleep loss. Although external de synchronization is the major culprit, it is not at all uncommon for travelers to experience difficulty falling asleep or remaining asleep because of gastrointestinal distress, uncooperative bladders, or nagging headaches. Such unwanted intrusions most likely to reflect the general influence of internal desynchronization. From the free-running subjects, the data has revealed that sleep tendency, sleepiness, the spontaneous duration of sleep, and REM sleep propensity, each varied markedly with the endogenous circadian phase of the temperature cycle, despite the facts that the average period of the sleep-wake cycle is different from that of the temperature cycle under these conditions. However, whereas the first ocurrence of slow wave sleep is usually associated with a fall in temperature, the amount of SWS is determined primarily by the length of prior wakefulness and not by circadian phase. Another factor to be considered for flight in either direction is the amount of prior sleep loss or time awake. An increase in sleep loss or time awake would be expected to reduce initial sleep latency and enhance the amount of SWS. By combining what we now know about the circadian characteristics of sleep and homeostatic process, many of the diverse findings about sleep after transmeridian flight can be explained. The severity of jet lag is directly related to two major variables that determine the reaction of the circadian system to any transmeridian flight, eg., the direction of flight, and the number of time zones crossed. Remaining factor is individual differences in resynchmization. After a long flight, the circadian timing system and homeostatic process can combine with each other to produce a considerable reduction in well-being. The author suggested that by being exposed to local zeit-gebers and by being awake sufficient to get sleep until the night, sleep improves rapidly with resynchronization following time zone change.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.614-622
• /
• 2016

This study was carried out to investigate the effect of modified-atmosphere packaging (MAP) on the quality change of "Tabor" tomatoes during long-term exportation periods. Hydroponics tomatoes were harvested at the turning stage, sorted, and box packed and then packaged in nylon film with a pallet. The packaged pallet was filled with a gas composition (5% $O_2$, 1% $CO_2$, and 94% $N_2$) and stored at $10^{\circ}C$ for three weeks. The quality changes in weight loss, firmness, color, acidity, soluble solids, and microorganism growth were measured every 7 day interval. During the initial storage, the pallet-scale MAP showed slightly higher weight loss and firmness changes when compared to the conventional pallet. The total color change (${\Delta}E$) during ripening was delayed 10% under MAP storage. Acidity, soluble solids and phenolic compound contents decreased with increases in storage time regardless of the storage method; however, the quality changes of tomatoes were delayed in the MAP pallet. Furthermore, the decay rate of the pallet-scale MAP stored for 14 days was less than that of the conventional pallet, and the number of microorganisms was approximately 30% lower in the pallet-scale MAP, showing a positive effect on marketability. These results suggested that the pallet-scale MAP of tomatoes could ensure higher quality and longer storage periods than conventional pallet storage.

• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.449-456
• /
• 1997

This study was concuted to determine the optimal conditions for raising the freshwater rotifer, Brachinus calyciflorus. The authors presented some biological informatin obtained from incubation experiment under the various controlled temperatures. Lorica size of the rotifer was divided into two groups : the length and the width for the S-type was $141.0\pm16.7\mu m$($110.1-182.5\;\mu m, n=44$)and $107.0\pm20.3\mu m\;(75.3-152.3\mu m, n=44)$, and those for the L-type was $262.8\pm15.2\mu m\;(234.4-288.6\mu m,\;n=20)\;and\;182.6\pm13.4\mu m (159.8-207.0\mu m,\;n=20$), respectively. The number of eggs being attached on the female varied from 1 to 11 at various culture conditions. Egg type was divided into two groups, large and small. Large and small egg was measured in its major axis as 85a.7-107.8$\mu$m and 55.1-65.2$\mu$m for S-type, and 104.9-121.8 $\mu$m and 62.8-89.1$\mu$m for L-type respectively. The maximum density was reached at 4th day after incubation. The density was 583.9 rotifers/$m\ell$ for $25^{\circ}C$-experimental. group and 421.3 rotifers/$m\ell$ for $22^{\circ}C$-experimental. group respectively. In the case of $28^{\circ}C$-experimental. group, it suddenly decreased into 4.7 rotifers/$m\ell$ at 1st day after incubations and did not recover to its initial density. The maximum rate of increase of populatin per day was reached 0.802 for $22^{\circ}C$-experimental. group at day 2 and fluctuated thereafter. For $25^{\circ}C$-experimental. group it increased to 0.964 at day 3 of incubation and then declined. And the egg ratio of female was reached the maximum of 0.614 for 22$^{\circ}C$- at 3rd day and 0.772 for $25^{\circ}C$-experimental. group at 4th day of incubation.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.727-734
• /
• 2015

In this study, three GRAS (generally recognized as safety) strain was isolated from Doenjang and Cheonggukjang and identified as a protease-producing microorganism, following the appearance of a clear zone around its colony when cultured on a medium containing skim milk. Based on an analysis of the nucleotide sequence of 16S ribosomal RNA, the strains wereas identified as Bacillus amyloliquefaciens and wereas therefore named Bacillus amyloliquefaciens CDD5, Bacillus amyloliquefaciens CPD4, and Bacillus amyloliquefaciens CGD3. Here, we analyzed the protease and ${\alpha}$-glucosidase inhibitory activities of the three B. amyloliquefaciens strains. Among the isolated strains, B. amyloliquefaciens CGD3 exhibited the highest protease activity (9.21 U/mL, 24 hr). The protease activities of B. amyloliquefaciens CDD5 and B. amyloliquefaciens CPD4 reached 1.14 U/mL and 8.02 U/mL, respectively, at 48 hr. The proteases from the three B. amyloliquefaciens strains showed the highest activities within a pH range of 8.0-9.0 at $50^{\circ}C$, and casein was found to be the preferred substrate on evaluating enzyme activity in the substrate specificity assay. The B. amyloliquefaciens strains exhibited maximal growth when the nutrient broth medium had an initial pH within the range of 5.0-10.0, 6-9% sodium chloride (NaCl), and 5% glucose. B. amyloliquefaciens CDD5 exhibited a low ${\alpha}$-glucosidase inhibition rate (5.32%), whereas B. amyloliquefaciens CPD4 and B. amyloliquefaciens CGD3 exhibited relatively higher inhibition rates of 96.89% and 97.55%, respectively.