• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.85-92
• /
• 2015

In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.

• 소음진동
• /
• 제5권3호
• /
• pp.395-402
• /
• 1995

In general low frequency vibration characteristics like an idleshake is mainly influeced by pillar section properties and joints. So the design technique development of vehicle pillar structures is required to initial design and vehicle development stage. In this paper to develop pillar structure design technique considering low frequency vibration characteristics, strain energy method, design sensitivity analysis method, and design optimization method using commercial finite element analysis program and optimization program are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.217-222
• /
• 1994

This paper describes the determination of optimal initial billet size for axisymmetric cold forging products using neural networks. The determination of optimal initial billet size is very important in forging design and forming sequence design, because the result of such designs and forming load can be different by variable initial billet sizes. The forming difficulty has been defined as the degree of difficulty in forming by 3 process ' forward extrusion, backward extrusion and upsetting. By neural networks a forming difficulty can be determined with the ratio of shape and forming process. From the graph of maximum, minimum, and average forming difficulties by variable billet sizes, the optimal billet size can be determined. The initial billets of a solid part and a hollow part whichwas determined by this study are compared with the sequence drawing generated by the one of forming sequence design system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.335-338
• /
• 1996

In this paper, we are going to design an iterative learning controller with the robust properties for initial error. For this purpose, the PID-type learning law will be considered and the design guide-line will be presented for the selection of the learning gain. Also, we are going to suggest a condition for the convergence of control input for a plant with input delay. Several simulation results are presented, which shows the effectiveness of the proposed algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.334-337
• /
• 1996

This is a paper intended for initial stage of vehicle modeling and design. The needs to determine a variety of vehicle suspension parameters required for initial design has been difficult and time-consuming task. In order to facilitate a concise and efficient presentation of initial vehicle design procedure, this paper uses a mathematical model and physical geometry. Vehicle model consists of dimensions, inertias and mechanical constants. These vehicle model parameters divided into several categories : basic parameters, coefficients and constants, design specification, spring and damper, bush stiffness, stabilizer bar, suspension geometry, tire, and vehicle weights of various design condition. This paper uses a vehicle design fundamental (VDF) program running under Windows 95 graphical interface. The features of VDF will be briefly outlined in this paper.

• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.213-223
• /
• 2015

본 연구에서는 기존의 헬리콥터 초기 설계 도구를 분석하여 단점을 확인하였으며, 추정식을 유도하고 최신화하여 설계 모델을 정립해 초기 설계도구의 우세성과 용이성을 제고하고자 하였다. 이를 위해 Tishchenko 방법론을 기반으로 최신 추정식을 유도하여 정립하였으며, 사이징에서는 순차분해법을 이용하여 충실도를 높이고 해석에 소요되는 시간을 줄이고자 하였다. 또한, 정립된 최신화된 경험식에 적용 가능한 경험적 파라미터를 헬기 데이터베이스를 이용한 회귀분석과 수치해석을 통해서 추출하여 설계 시 발생되는 오차를 줄이고 사용자가 어렵지 않게 적용할 수 있도록 하였다. 이를 통해 도출한 연구 결과는 기존의 설계 도구인 RISPECT 개념 설계 도구와 비교하여 설계 모델이 타당함을 확인하였으며, 기존의 운용되고 있는 다양한 중량군의 헬리콥터를 재설계한 중량 및 형상 계산 결과가 평균 5%이하의 오차를 보임으로 초기 설계 도구로 효율적으로 활용될 수 있음을 확인하였다.

• 대한교통학회지
• /
• 제6권1호
• /
• pp.5-16
• /
• 1988

Development is given to an optimal network design method using continuous design variables. Modified Hooke-and-Jeeves algorithm is implemented in order to solve nonlinear programming problem which is approximately equivalent to the real network design problem with system efficiency crieteria and improvement cost as objective function. the method was tested for various forms of initial solution, and dimensions of initial step size of link improvements. At each searching point of evaluating the objective function, a link flow problem was solved with user equilibrium principles using the Frank-Wolfe algorithm. The results obtained are quite promising interms fo numbers of evaluation, and the speed of convergence. Suggestions are given to selections of efficient initial solution, initial step size and convergence criteria. An approximate method is also suggested for reducing computation time.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.103-111
• /
• 1998

This paper describes the initial hull form design process which generate a hull form using a neurofuzzy modeling. Neurofuzzy system is to combine the merits of fuzzy inference system and neural networks. Therefore it has structured knowledge representations as well as adaptive capacities. Initial hull form design stage is the process which generate an adoptable hull form from the limited design information and multi-decidions condidering correlations with design factors. It can be assidted efficiently by neurofuzzy system. This paper suggests two methods of an initial hull form generation using the neurofuzzy modeling and B-spline theory. and examines the usefulness of suggested method through its application examples.

• 소성∙가공
• /
• 제12권3호
• /
• pp.208-213
• /
• 2003

The methodology to design initial blanks considering the reduction of both springback and flange trimming amounts is studied. Three dimensional forming analysis of a trial blank Is first carried out using FEM and the tentative Initial blank shape is then determined by cutting the outer edge of the trial blank whose shape is nearly matched with the trimming line. During the shaping the blank edge, tile movement of blank outer line is described with random variables to reduce the sensitivity of initial blank geometry. After performing 2-D FEM forming and springback simulations for selected sections and optimizing the trimming and springback amounts in terms of section length of the blank, the initial blank is finally determined. In order to see tile springback reduction in the initial blank determined by the proposed method, a stepped s-rail is stamped and the sppingback is measured. The springback of newly designed initial blank of stopped s-tail is tremendously reduced.

• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.360-370
• /
• 1999

The paper proposed a basic architecture of an agent system to support exchange and sharing of design informations by means of ACL(Agent Communication Language) which can represent design informations and knowledges. Based on the architecture of the agent system a ship initial design agent system was implemented in order to show the effectiveness of the agent-based system. The basic architecture of the agent consists of an ACL handlerand CORBA(Common Object Request Broker Architecture) objects for the exchange of ACL messages in the heterogeneous and distributed environment. The ACL handler can process expressions of knowledge and manage communication messages among the agents. The paper mainly focuses on the implementation of the ACL handler. The ACL handler consist of a KQML(Knowledge Query and Manipulation Language) handler that manages KQML messages, a conversation module, and a content handler that handles message contents. The conversation modulo implements conversation policies and checks all messages if they are allowable and meaningful messages based on the conversation policies. The implemented agent-based system was applied to the ship initial design to show the handling procedure of the agent system.