• Title/Summary/Keyword: Initial acquisition

Search Result 190, Processing Time 0.028 seconds

Implementation and Validation of Earth Acquisition Algorithm for Communication, Ocean and Meteorological Satellite

  • Park, Sang-Wook;Lee, Young-Ran;Lee, Byoung-Sun;Hwang, Yoo-La;Lee, Un-Seob
    • Journal of Astronomy and Space Sciences
    • /
    • v.28 no.4
    • /
    • pp.345-354
    • /
    • 2011
  • Earth acquisition is to solve when earth can be visible from satellite after Sun acquisition during launch and early operation period or on-station satellite anomaly. In this paper, the algorithm and test result of the Communication, Ocean and Meteorological Satellite (COMS) Earth acquisition are presented in case of on-station satellite anomaly status. The algorithms for the calculation of Earth-pointing attitude control parameters including those attitude direction vector, rotation matrix, and maneuver time and duration are based on COMS configuration (Eurostar 3000 bus). The coordinate system uses the reference initial frame. The constraint calculating available time-slot to perform the earth acquisition considers eclipse, angular separation, solar local time, and infra-red earth sensor blinding conditions. The results of Electronics and Telecommunications Research Institute (ETRI) are compared with that of the Astrium software to validate the implemented ETRI software.

Hybrid PN Code Search with Soft-decision Technique (연판정 하이브리드 PN 코드 동기 획득 기법)

  • Lee Seong-Joo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.7A
    • /
    • pp.682-688
    • /
    • 2006
  • In this paper, a soft-decision method for initial PN code acquisition in pilot-channel aided Direct Sequence Code Division Multiple Access (DS-CDMA) systems is proposed in order to improve the acquisition performance. We apply this technique to the conventional hybrid search algorithm and analyze it in terms of mean code acquisition time. For the analysis, we present mathematical model of proposed algorithm and also perform the simulation under IMT-2000 channel models. Numerical results show that our proposed scheme outperforms the conventional one by 0.2 - 0.4 sec with respect to the mean code acquisition time because the soft decision technique can mitigate the possible decline in search performance caused by the use of a hard-decision technique.

The design of the matched filter for CDMA rapid initial PN code synchronization acquisition using HW reuse scheme (CDMA 고속초기동기획득을 위한 HW 재사용에 의한 정합필터의 설계)

  • Lim, Myoung-Seob
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.11
    • /
    • pp.28-36
    • /
    • 1998
  • In the CDMA mobile communication system with asynchronous mode among base stations, the initial PN code acquisition method using a matched filter can be considered for the rapid PN code synchronization acquisition in the handoff region. In the model of the noncoherent QPSK/DS-SS under the Rayleigh fading channel, the mean acquisttion time of the matched filter is analyzed to have a shortened time in proportion to the length of matched filter to be compared with the serial correlation method. In this paper to improve the HW complexity of the conventional matched device which enables the repeated correlation process, is designed and its function is verified through the FPGAsimulation using Altera MaxPlus Ⅱ.

  • PDF

A New Efficient Acpuisition Method and Its Implementation using the Phase Offset of Binary Code (이원부호 위상 오프셋를 이용한 새로운 방식의 동기 획득 시스템 구현)

  • 김동희;한영열
    • Proceedings of the IEEK Conference
    • /
    • 1998.06a
    • /
    • pp.11-14
    • /
    • 1998
  • This paper introuces a new efficient method of synchronization acquisition which is the most important element in DS-CDMA system using the phase offset of binary code. This approach uses the binary code function which can easily estimate the phase offset from the received spreading waveforms which respect to the receiver-stored replica of the spreading code. This paper proposes the initial acquisition model with repeat error control device that is good for perfomance. The hardware is implemented by TMS320c30

  • PDF

Optimal number of initial products test quantity applied Korean version of LRIP (한국형 초도생산제도 도입을 적용한 초도생산품 시험 수량 산출 방안 연구)

  • Jung, Sung-Chan;Kang, Seok-Joong
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.1
    • /
    • pp.120-129
    • /
    • 2020
  • This paper aims to benchmark the United States' LRIP, the country's initial production policy, and provide a Korean version of such policy which reflects the circumstances of the country's weapon system research & development(R&D) and acquisition procedures. The research suggests measures to improve the country's initial production policy in a direction that the policy could execute two stage continuously: (1) employment test & evaluation(OT&E), conducted on prototypes during the development stage, and (2) field employment tests(FT), conducted on initial products during the production stage. In addition, the research provides an equation calculating the optimal number of initial test products to be produced, applying statistical theories of t-distribution. The research aims to be used a reference to calculate the optimal number of initial products to be produced for testing in order to improve future national defense acquisition systems and the stable R&D of weapons systems.

A Serial Acquisition Scheme for DS-SS Systems Using Antenna Arrays and Its Performance in a Fading Channel (안테나 배열을 사용한 DS-SS 시스템을 위한 직렬 포착 방식과 페이딩 채널에서의 성능)

  • 박민규;오성근
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.5B
    • /
    • pp.931-941
    • /
    • 2000
  • We propose a serial acquisition scheme using antenna arrays for initial acquisition of direct sequence spread spectrum (DS-SS) signals, which can lower substantially the range of detectable signal-to-noise ratio (SNR). The proposed scheme uses the sum of the independent decision samples form psedo-noise (PN) co-phased noncoherent I-Q matched filters (MFs) associated with antenna arrays as a decision variable in order to enhance SNR of the resulting signal. We analyze its mean acquisition time performance under an additive white Gaussian noise (AWGN) channel and a flat Rayleigh fading channel by deriving the expressions for the probabilities of detection and false alarm. From mumerical results, we see that the acquisition performance of the proposal scheme becomes improved continually as the number of antennas increses.

  • PDF

The Development of Grapheme-Phoneme Correspondence Rules and Kulja Reading in Korean-Chinese Children (중국 조선족 아동의 한글 자소-음소 대응능력의 발달과 글자읽기와의 관계에 관한 연구)

  • Yoon, Hyekyung;Park, Hyewon
    • Korean Journal of Child Studies
    • /
    • v.26 no.4
    • /
    • pp.145-155
    • /
    • 2005
  • This study was carried out to reveal Hangul acquisition processes in Korean-Chinese children who grow in a horizontal bilingual environment. In this experiment Grapheme substitution/deletion tasks and sensible/non-sensible Kulja reading tasks were administered to 3-, 4-, 5- and 6-year-old Korean-Chinese children growing up in a bilingual environment. Results were that Korean-Chinese children showed similar patterns of Hangul acquisition processes to Korean children but acquired grapheme-phoneme(G-P) correspondence earlier than Korean children. Hangul acquisition rates were 41.7%, 45.7%, 53% and 92.7% at age 3, 4, 5 and 6, respectively. Both Korean-Chinese and Korean children showed higher sensitivity for the final consonant than for the initial and middle consonants. Correlation between phoneme perception and reading was only significant among 6-year-olds in non-sensible Kulja reading tasks. Training in transforming ideographic Chinese to a phonetic system could effect early acquisition of G-P correspondence in Korean-Chinese children.

  • PDF

3D Spatial Information Acquisition for Construction Operation and Maintenance on a Construction Site (효율적인 건설공사와 유지관리를 위한 건설현장에서의 3차원 공간 정보 획득)

  • Kim, Chang-Wan
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2004.11a
    • /
    • pp.188-193
    • /
    • 2004
  • 3D spatial-modeling can be used in various safety-enhancement applications and for as-built data acquisition in project-control systems. The objective of the research reported herein was to provide spatial-modeling methods that represent construction sites in an efficient manner and to validate the proposed methods by testing them in an actual construction environment. Algorithms to construct construction-site scenes and to carry out coordinate transformations in order to merge data from different acquisition locations are presented. Field experiments were conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach.

  • PDF

Building DSMs Generation Integrating Three Line Scanner (TLS) and LiDAR

  • Suh, Yong-Cheol;Nakagawa , Masafumi
    • Korean Journal of Remote Sensing
    • /
    • v.21 no.3
    • /
    • pp.229-242
    • /
    • 2005
  • Photogrammetry is a current method of GIS data acquisition. However, as a matter of fact, a large manpower and expenditure for making detailed 3D spatial information is required especially in urban areas where various buildings exist. There are no photogrammetric systems which can automate a process of spatial information acquisition completely. On the other hand, LiDAR has high potential of automating 3D spatial data acquisition because it can directly measure 3D coordinates of objects, but it is rather difficult to recognize the object with only LiDAR data, for its low resolution at this moment. With this background, we believe that it is very advantageous to integrate LiDAR data and stereo CCD images for more efficient and automated acquisition of the 3D spatial data with higher resolution. In this research, the automatic urban object recognition methodology was proposed by integrating ultra highresolution stereo images and LiDAR data. Moreover, a method to enable more reliable and detailed stereo matching method for CCD images was examined by using LiDAR data as an initial 3D data to determine the search range and to detect possibility of occlusions. Finally, intellectual DSMs, which were identified urban features with high resolution, were generated with high speed processing.

A Design of Fuzzy-Neural Network Controller of Wheeled-Mobile Robot for Path-Tracking (구륜 이동 로봇의 경로 추적을 위한 퍼지-신경망 제어기 설계)

  • Park Chongkug;Kim Sangwon
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.10 no.12
    • /
    • pp.1241-1248
    • /
    • 2004
  • A controller of wheeled mobile robot(WMR) based on Lyapunov theory is designed and a Fuzzy-Neural Network algorithm is applied to this system to adjust controller gain. In conventional controller of WMR that adopts fixed controller gain, controller can not pursuit trajectory perfectly when initial condition of system is changed. Moreover, acquisition of optimal value of controller gain due to variation of initial condition is not easy because it can be get through lots of try and error process. To solve such problem, a Fuzzy-Neural Network algorithm is proposed. The Fuzzy logic adjusts gains to act up to position error and position error rate. And, the Neural Network algorithm optimizes gains according to initial position and initial direction. Computer simulation shows that the proposed Fuzzy-Neural Network controller is effective.