• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1839-1848
• /
• 2021

Objective: The objective of the present study was to investigate the comparative effects of dietary functional nutrients including glutamine (Gln), chromium picolinate (Cr picolinate), vitamin C (Vit C), betaine (Bet), and taurine (Tau) on growth performance, meat quality, immune responses, and stress biomarkers in broiler chickens raised under heat stress conditions. Methods: A total of 420 21-d-old Ross 308 male broiler chickens (initial body weight = 866±61.9 g) were randomly allotted to 1 of 7 treatment groups with 6 replicates. One group was kept under thermoneutral conditions and was fed a basal diet (PC, positive control). Other 6 groups were exposed to a cyclic heat stress condition. One of the 6 groups was fed the basal diet (NC, negative control), whereas 5 other groups were fed the basal diet supplemented with 0.5% Gln, 500 ppb Cr picolinate, 250 mg/kg Vit C, 0.2% Bet, or 1.0% Tau. The diets and water were provided ad libitum for 21 d. Results: Broiler chickens in NC group had decreased (p<0.05) growth performance and immune responses measured based on cutaneous basophil hypersensitivity (CBH), but increased (p<0.05) stress responses measured based on feather corticosterone concentrations and blood heterophil:lymphocyte than those in PC group. However, none of dietary functional nutrients had a positive effect on growth performance of broiler chickens. Dietary supplementation of 250 mg/kg Vit C improved (p<0.05) CBH responses of broiler chickens, but other functional nutrients had no such an improvement in CBH responses. All functional nutrients decreased (p<0.05) stress responses of broiler chickens. Conclusion: Functional nutrients including Gln, Cr picolinate, Vit C, Bet, and Tau at the supplemental levels used in this study decrease stress responses of broiler chickens to a relatively similar extent. However, this reduction in stress responses could not fully ameliorate decreased productive performance of broiler chickens raised under the current heat stress conditions.

• Computers and Concrete
• /
• v.33 no.6
• /
• pp.707-724
• /
• 2024

This paper proposes a study of cement replacement with rice husk ash (RHA) and eggshell ash (ESA) for enhanced mechanical properties of geopolymer (GP) concrete with and without admixture. The main objective is to investigate the mechanical properties of GP with various replacement levels of Pozzolana Portland cement by RHA and ESA. The GP resistance to durability is examined and impact of ash materials on concrete's durability performance is determined. The environmental benefits of using agricultural waste materials in GP manufacturing minimize cement usage and CO2 emissions. The goal is to assess value of RHA-ESA of building material, paving stones for structures to lessen environmental impact. The novelty lies in use of ESA and RHA as partial replacements for cement and investigation of admixtures to enhance concrete properties, and reduce environmental impact. The research contributes by introducing a novel approach to reducing cement consumption by using ESA and RHA to address environmental concerns. It also explores the potential benefits of admixtures improving concrete performance and reducing environmental pollution. A study is carried with and without impacts of admixture to find compressive strength of GP cubes. The cement has been replaced by RHA and ESA in the range of (2.5%+7.5%, 5%+5%, 7.5%+2.5) by weight of cement for M20 mix. The compressive strength (CS) and split tensile strength (STS) at 7days, 14 days and 28 days is obtained as 21 N/mm2 at 7.5%RHA+2.5%ESA and 2.3 at 7.5%RHA+2.5%ESA, 24 N/mm2 at 7.5%RHA+2.5%ESA and 2.3 at 7.5%RHA+2.5%ESA, 28 N/mm2 at 7.5%RHA+2.5%ESA and 2.8 at 7.5%ESA respectively with normal curing condition.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.106-117
• /
• 2012

Indirected heating dryer is used as one of the food waste treatment technologies for the production of the drier material supplied to the recycling facilities or end user. This study investigated the effect on drying efficiency for the operation of rotating screw with the circulating and falling movements on indirected drying process of food waste. The screw operating condition showed higher drying efficiency despite of the shorter drying time compared to the screw non-operating condition. The moisture content decreased to 14.4% from the initial moisture content of 77.1% after drying 5 hours in the screw operating condition. On the other hand, in the screw non-operating condition, the moisture content decreased slightly to 35.6% after drying 16 hours. During the drying process, variations of the water evaporation rate and particle size showed different tendencies depending on the moisture content regions. In the higher moisture content region above the glue zone(moisture content of about 50%-60%), the particle size increased and the water evaporation rate reached the highest peak. In the range of glue zone, the particle size maximized while the water evaporation rate decreased sharply. In the lower moisture content region below the glue zone, the water evaporation rate and particle size both decreased at the same time. The particle size distribution was widely ranged from 25.0mm to 0.25mm in the screw operating condition while it was narrowly distributed in the screw non-operating condition from 25.0mm to 3.56mm, especially highly concentrated to 25.0mm. It was regarded that the hygroscopic, capillary and gravitational water evaporated more easily from the intra-particle during the circulating and falling movement caused by the rotating of the screw and the difference of the cohesional force of water within intra-particle depending on the moisture content regions. Comparing the effect of the circulating and falling movement on drying efficiency, the water evaporation rates per time and per weight of dry solid in the screw operating condition were higher about 364% and 356%, respectively, than those of the screw non-operating condition.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.85-90
• /
• 2007

Fenton's Reagent is applied to directly dissolve the cation-exchange resin, IRN-77. The characteristics of the experimental procedure is to dry the resin first and $FeSO_4$ solution is completely absorbed into the resin, and then $H_2O_2$ is introduced later for an effective reaction between the reagents within the resin. An a characteristic of the dissolution, the lag time is needed for about 1 hour until the main reaction is occurred, which was more affected with the less concentration of $FeSO_4$ and the less initial dose of $H_2O_2$. The dose of $H_2O_2$ was equally divided into the early stage and the later stage after the initial reaction to provide an effective and safe reaction condition. The optimum conditions is appeared that the concentration of $FeSO_4$ is 0.9M and the dose of 15% $H_2O_2$ solution is 6-7 volume for the dissolution of unit weight of IRN-77. The effect of the heating on the lag time was checked and the time could be reduced within 5 minutes at $50^{\circ}C$, which is a relatively low temperature. The large amount of the resin, 5g and 10g, was also completely decomposed by increasing the dose of $H_2O_2$ to 9-10 volume ratio.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.476-486
• /
• 2000

Background: Pulmonary atresia with intact ventricular septum(PA/IVS) is an anatomically heterogenous anomaly with a variety of surgical strategies possible. The purpose of the study is to evaluate the influence of right ventricular size on the early and midterm results of surgical repair of PA/IVS. Material and method: Medical records of 20 consecutive patients with PA/IVS operated on between January 1993 and August 1999 were retrospectively reviewed. There were 12 boys and 8 girls whose ages ranged from 2 days to 14.5 months (median 6 days). Their body weight ranged from 2.52kg to 9.35 kg(median 3.18kg). The preoperative Z-value of the diameter of the tricuspid valve(T-valve) was less than or -4 in 5 patients, between -4 and -2 in 1, between -2 and 0 in 7, between 0 and 2 in 6, and greater than or 2 in 1. All patients who had z-value of tricuspid valve greater than -2.05 were attempted biventricular repair(n=15) and all patients who had it smaller than -4.4 underwent systemic-pulmonary shunt operation only(n=3) or bidirectinal cavopulmonary shunt with right ventricular reconstruction(n=2). Result: Two early deaths(2/20, 10%) occurred. Both were infants who underwent transannular patch with shunt. One of these two had huge right ventricle(Z-value of tricuspid valve = 5). There were 2 late non-cardiac deaths 3 and 7 months after operations respectively. Follow-up was completed in all children at a mean of 35.3 months(range, 5 to 54 months). 10 of 11 survivors who underwent transannular patch or valvotomy with or without shunt procedure were in NYHA functional class I even though some of them had small interatrial communication or patent shunt. All three patients who had shunt procedure only at initial palliation completed Fontan procedures with no death. Two patients who underwent right ventricular outflow reconstruction with bidirectional cavopulmonary shunt were also in good condition. Conclusion: The transanular RVOT patch or valvotomy with or without systemic-pumonary shunt as an initial palliative procedure to achieve biventricular repair for the patients who had neither too small nor too large right ventricle(-2.05$\leq$Z-value of T-value of T-valve$\leq$2) could be performed at low operative risk(1/14 7.1%). Systemic-pulmonary shunt procedure and bidirectional cavopulmonary shunt procedure for the patients who had small right ventricle(Z-value of T-valve$\leq$4.4) could be also performed with low risk. But a patient with huge right atrium and ventricle(Z-value of t-valve=5) had poor operative result.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.562-565
• /
• 2011

In this study, we developed a bioprocess using Clostridium ljungdahlii as a biological catalyst to produce bio-ethanol, and the effect of pH on microbial growth and ethanol production was investigated. From the results of fermentation at various initial pH condition without pH control, pH of fermentation broth decreased to 4.5 within 24 h due to accumulation of by-product acetic acid and both microbial growth and ethanol production were stopped. The experimental result of initial pH 8 showed the highest microbial growth and ethanol production (0.53 g/L), since the pH drop was relatively slow. From the experiment of pH 7 maintained fermentation using pH controllable bioreactor, the maximum cell dry weight of 1.65 g/L and the maximum ethanol concentration of 1.43 g/L were obtained within 24 h. In conclusion, the C. ljungdahlii growth was enhanced by pH maintenance of neutral range, and the ethanol production was also enhanced based on the growth-associated ethanol production characteristics of C. ljungdahlii.

• Journal of Chest Surgery
• /
• v.35 no.12
• /
• pp.862-870
• /
• 2002

The surgical results of the patients with single ventricle(SV) associated with total anomalous pulmonary venous connection(TAPVC) has been reported with high mortality and morbidity due to their morphologic and hemodynamic complexity. A retrospective review was undertaken to report the outcome of the first-stage palliative surgery in our institution and to determine the factors influencing early death. Material and Method: Between January 1987 and June 2002, 39 patients with SV and TAPVC underwent surgical intervention with or without TAPVC repair. Age at operation ranged from 1day to 10.7months (median age, 2.4month), and 29 patients were male. Preoperative diagnosis included 20 right-dominant SV, 15 SV with endocardial cushion defect, 3 left-dominant SV, and 1 tricuspid atresia. The pulmonary venous connection was supracardiac in 22, cardiac in 5, infracardiac in 11, and mixed in 1, Obstructed TAPVC was present in 11. First-stage palliative surgery was performed in 37. Repair of TAPVC, either alone or in association with other procedures, was performed during the initial operation in 31. Univariate and multivariate analyses were performed to analyze the risk factors influencing the operative death. Result: A mean follow-up period of survivors was 34.3 $\pm$ 43.0(0.53 ~ 146.2)months. Overall early operative mortality was 43.6%(17/39). The causes were low cardiac output in 8, failure of weaning from cardiopulmonary bypass in 3, sepsis in 2, pulmonary hypertensive crisis in 1, pulmonary edema in 1, pneumonia in 1, and postoperative arrhythmia in 1. Risk factors influencing early death in univariate analysis were body weight, surgical intervention in neonate, obstructive TAPVC, preoperative conditions including metabolic acidosis, and need for inotropic support, TAPVC repair in initial operation, operative time, and cardiopulmonary bypass(CPB) time. In multivariable analysis, body weight, age at initial operation, surgical intervention in neonate, preoperative conditions including metabolic acidosis, need for inotropic support and CPB time were the risk factors. Conclusion: In this study, we demonstrated that the patients with SV and TAPVC had high perioperative mortality. Preoperative poor condition, young age, the length of operative and CPB time, the presence of obstructive TAPVC had been proven to be the risk factors. This fact suggests that the avoidance of unnecessarily additional procedures may improve the surgical outcomes of the first-stage palliative surgery. However further observation and collection of the data is mandatory to determine the ideal surgical strategy.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.577-586
• /
• 2018

We recently reported the potential probiotic properties of Lactobacillus brevis SBB07 isolated from blueberries. The present study investigates the effect of culture conditions such as temperature, initial pH, culture time, and medium constituent for industrial application. The ingredients of the medium to improve cell growth were selected by Plackett-Burman design (PBD) and central composite design (CCD) within a desirable range. The PBD was applied with 19 factors: seven carbon sources, six nitrogen sources, and six microelements. Protease peptone, corn steep powder (CSP), and yeast extract were found to be significant factors for the growth of SBB07. The CCD was then applied with three variables found from the PBD at five levels, and the optimum values were decided for the three variables: protease peptone, CSP, and yeast extract. In the case of the growth of SBB07, the proposed optimal media contained 2.0% protease peptone, 2.5% CSP, and 2.0% yeast extract, and the maximum dried-cell weight was predicted to be 2.93963 g/l. By the model verification, it was confirmed that the predicted and actual results are similar. Finally, the study investigated the effects of incubation temperature and initial pH at the optimized medium. It was confirmed that the dried-cell weight increased from $2.2933{\pm}0.0601g/l$ to $3.85{\pm}0.0265g/l$ when compared to the basal medium at $37^{\circ}C$ and initial pH 8.0. Establishing the optimal culture condition for SBB07 provides good potential for applications in probiotics and can serve as the foundation for the industrialization of materials.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.36-43
• /
• 2000

This study was carried out for treatment and reuse of inorganic sludge from Fenton process at B dyeing wastewater treatment plant. The parameters for pilot-scale treatment system were derived from the results of this study. It was found that $COD_{cl}$ of the treated effluent became lower than 100 mg/l approximately on the optimal reaction condition. 2nd sludge which was generated after redissolving sludge was analyzed, and it showed that reduction ratio of ash in 2nd sludge and total dry sludge weight in comparison with current sludge were 85% and 65%. Also Fe salt in sludge was redissolved about 90~95% of initial Fe by weight. It was estimated almost ￦350,000,000 for sludge reuse process. It was estimated saving of about ￦1,300,000 per day (￦420,000,000 per year) in operating cost based on 30,000 $m^3$/d treatment, which these were about ￦430,000 per day in chemical, ￦1,100,000 per day in sludge transportation and ￦200,000 per day in equipment maintenance. Payback period with interest charge for investment cost was estimated about 10.5 months. Also, net present value (NPV) was ￦792,000,000 and internal rat of return (IRR) was about 110%.

• Journal of Aquaculture
• /
• v.21 no.2
• /
• pp.102-106
• /
• 2008

This study was conducted to evaluate extruded pellets(EP) for the growth of sub-adult flounder Paralichthys olivaceus by comparing with raw fish-based moist pellet(MP). Two replicate groups of 150 fish per each tank(initial mean weight $594{\pm}6.5g$) were fed one of two EPs(EP1 and EP2) and a MP for 32 weeks. Survival was not significantly affected by experimental diets. Final mean weight of fish fed the EP1 was not significantly different from that of fish fed the MP, but that of fish fed EP2 was significantly lower than that of fish fed EP1 and MP (P<0.05). Feed efficiency and protein efficiency ratio of fish fed the EP1 and EP2 were significantly higher than those of fish fed MP(P<0.05). Daily feed intake of fish fed the EPs was significantly lower than that of fish fed MP(P<0.05). Condition factor was not significantly different among all groups. The contents of moisture, crude protein and lipid in dorsal muscle were significantly affected by experimental diets(P<0.05). Based on the results of this study, the dietary formulations used in EP1 and EP2 could be applied in the practical extruded pellet feeds for sub-adult flounder(594-1,126 g).