• 제목/요약/키워드: Initial Reduction Rate

검색결과 372건 처리시간 0.029초

Factors affecting the reduction rate of odontogenic cysts after decompression based on 3-dimensional volumetric analysis

  • Sarawut Wongrattanakarn;Vorapat Trachoo;Boosana Kaboosaya;Pornkawee Charoenlarp;Net-nada Chongruangsri;Patcharapit Promoppatum
    • Imaging Science in Dentistry
    • /
    • 제53권4호
    • /
    • pp.313-323
    • /
    • 2023
  • Purpose: This study aimed to investigate the potential factors that could affect the reduction rate of odontogenic cysts following decompression using cone-beam computed tomography (CBCT) for 3-dimensional volumetric analysis. Materials and Methods: The study sample consisted of CBCT images of 41 individuals who underwent decompression of odontogenic cysts at the Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Chulalongkorn University, between 2010 and 2022. Preoperative and postoperative CBCT results were collected, and a volumetric analysis was conducted to evaluate the differences in the reduction rate and the percentage of volume reduction of cystic lesions based on different parameters. Correlations between these parameters were analyzed to determine associations. Results: In this study, the average time of decompression for odontogenic cysts was 316 days. Males demonstrated a higher reduction rate than females (P<0.05). The reduction rate was directly proportional to initial cyst volume, with higher reduction rates for cysts with large initial volume than those with small initial volume (P<0.05). Spearman's rank correlation coefficient indicated a weak positive correlation between the initial cyst volume and the duration of decompression. Additionally, a strong positive correlation was observed between the initial volume and the reduction rate. Conclusion: Knowledge of the reduction rate of odontogenic cysts is vital for surgeons to evaluate the duration of decompression before enucleation and to determine a definitive treatment plan. Sex and initial lesion volume had significant effects on the reduction rate.

의료기관 운영요인과 환경요인이 진료비 삭감율에 미치는 영향에 관한 연구 (Study of Management and Environmental Factors Affecting Medical Expense Reduction)

  • 양유정
    • 디지털융복합연구
    • /
    • 제10권11호
    • /
    • pp.493-502
    • /
    • 2012
  • 본 연구는 진료비 삭감율에 영향을 미치는 의료기관의 운영요인과 환경요인이 무엇인지 알아보기 위한 연구로 삭감율을 최초 삭감율과 최종 삭감율로 구분하고, 진료비는 입원과 외래로 구분하여 조사 연구 하였다. 연구의 자료는 전국 병원급 이상 독립된 보험심사부서의 부서장을 대상으로 직접 설문조사를 통해 얻어진 205부의 설문지를 최종 분석 자료로 이용하였다. 본 연구의 결과는 다음과 같다. 진료비 최초 삭감율과 최종 삭감율에 대한 집단 간의 차이를 분석한 결과 입원의 의료기관 운영요인은 보유 병상, 총 진료과, 보험심사 인력, 총 직원수에 유의한 결과를 보였으며, 외래는 의무기록 운영형태, 보유병상, 총 진료과, 보험심사인력, 총 직원수에 유의한 결과를 보였다. 진료비 삭감율에 영향을 미치는 의료기관의 운영요인은 최초 삭감과 최종 삭감이 동일하게 입원은 병상수가 높을수록, 외래는 전자의무기록을 시행할수록 유의한 결과를 보였다. 진료비 삭감율에 영향을 미치는 의료기관의 환경요인은 최초 삭감과 최종 삭감이 동일하게 입원은 업무협조가 잘 될수록, 지표관리를 시행할수록, 시간외 수당이 지급될수록 유의한 결과를 보였다. 외래의 경우 진료비 최초 삭감은 지표관리를 시행할수록, 진료비 관련 위원회를 구성하여 운영할수록 유의한 결과를 보였으며, 최종 삭감은 업무협조가 잘 될수록, 지표관리를 시행할수록, 시간외수당이 지급될수록 유의한 결과를 보였다.

환경요인이 $Fe^0$ 에 의한 TNT의 환원 반응속도에 미치는 영향 (The Effects of Environmental Conditions on the Reduction Rate of TNT by $Fe^0$)

  • 배범한
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
    • /
    • pp.52-55
    • /
    • 2000
  • The effects of environmental conditions, initial dissolved oxygen concentrations, pH, and the presence of electron carrier vitamin B$_{12}$ , on the reduction rate of TNT by Fe$^{0}$ was Quantitatively analyzed using a batch reactor. In all experiments, TNT reduction was best described with a first order reaction and the reduction rate decreased with the increase in the initial DO concentration. However, the specific reaction rate did not decrease linearly with the increase in the initial DO concentration. In the presence of HEPES buffer 0.2 and 2.0 mM(pH 5.7$\pm$0.2), the specific reaction rate increased more than 5.8 times, which showed reduction rate is rather significantly influenced by the pH of the solution. To test the possibility of reaction rate enhancement, well-known electron carrier(or mediator), vitamin B$_{12}$ has augmented besides Fe$^{0}$ . In the presence of 8.0 $\mu\textrm{g}$/L of vitamin B$_{12}$ , the specific reaction rate increased as much as 14.6 times. The results indicate that the addition of trace amount of vitamin B$_{12}$ can be a promising rate controlling option for the removal of organics using a Fe$^{0}$ filled permeable reactive barrier.

  • PDF

전기펜톤공정을 이용한 석유화학공장 폐활성슬러지의 감량화 가능성 평가 (A study on reduction of excess sludge in activated sludge system from a petrochemical plant using electro fenton process)

  • 정종민;김경일;심나타리아;박철희;이상협
    • 상하수도학회지
    • /
    • 제23권5호
    • /
    • pp.669-678
    • /
    • 2009
  • The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

Ar+H2 혼합(混合)가스에 의한 MoO3의 MoO2로의 환원거동(還元擧動) (Reduction Behavior of MoO3 to MoO2 by Ar+H2 Gas Mixture)

  • 손호상;이향준;박종일
    • 자원리싸이클링
    • /
    • 제20권4호
    • /
    • pp.71-77
    • /
    • 2011
  • $MoO_3$ 분말을 723 K ~ 873 K에서 Ar+$H_2$ 혼합기체를 이용히여 수평관상로에서 $MoO_2$로 훤원하였으며, 반용속도를 배가스 중의 상대습도를 측정하여 계산하였다. 반응속도는 수소가스 분압과 반응속도에 따라 현저하게 증가하였다. 환원 반응초기에 $H_2O$의 발생속도가 급격하게 증가하였으며, 시간의 경과에 따라 배가스 중의 $H_2O$ 분압은 급격하게 감소하였다. 이 시기에 환원 반응율은 직선적으로 증가하였다. 환원반응 초기의 $MoO_3$에서 $MoO_2$로의 환원반응의 활성화 에너지는 73.56 kJ/mol로 계산되었다.

고탄소강의 구상화속도에 미치는 초기 미세조직, 냉간압연 및 온도의 영향 (Effect of Initial Microstructure, Cold Rolling and Temperature on the Spheroidization Rate of Cementite in High Carbon Steel)

  • 김준호;하태권
    • 소성∙가공
    • /
    • 제22권3호
    • /
    • pp.158-164
    • /
    • 2013
  • The spheroidization behavior of cementite in a SK85 high carbon steel was investigated in this study. Fine and coarse pearlite microstructures were obtained by appropriate heat treatments according to the TTT diagram of SK85 high carbon steel. Hot rolled plates of SK85 steel were austenitized at $800^{\circ}C$ for 2 hrs and then put directly into a salt bath at either $570^{\circ}C$ or $670^{\circ}C$ to obtain a fine pearlite (FP) structure and a coarse pearlite (CP) structure, respectively. Cold rolling was subsequently conducted on those specimens with reduction ratios from 0.2 to 0.4. Spheroidization heat treatments were conducted at the subcritical temperatures of 600 and $720^{\circ}C$ for 1 to 32 hrs to elucidate the effect of initial microstructures, heat treatment temperature, and cold reduction ratios on the cementite spheroidization rate. Spheroidization proceeded with fragmentation of cementite plates, spheroidization of the cementite platelets, and coarsening consecutively. Mechanical fragmentation of cementite by cold rolling expedited the rate of spheroidization. The spheroidization rate of FP was much more rapid than that of CP and the spheriodization rate increased with increases in the cold reduction ratio.

재순환 충전탑식 반응기를 이용한 효율적 탈질 (Recycled packed-bed reactor for efficient denitrification)

  • 김성홍;송승훈;박재연;유영제
    • KSBB Journal
    • /
    • 제19권2호
    • /
    • pp.154-158
    • /
    • 2004
  • 본 논문에서는 회분식 반응기에서 초기 산화환원전위가 +40 mV에서 -70 mV으로 낮아짐에 따라 탈질 속도는 1.25 mg/min에서 3.33 mg/min으로 증가하였고, 또한 회분식 반응기에서 질산성질소의 농도가 200 mg/1까지 증가할수록 nitrite의 축적없이 탈질 속도가 초기 농도에 비례적으로 증가하였다. 반면, 질산성질소의 농도가 400 mg/1가 되면 탈질 속도의 변화는 없으나 nitrite의 축적이 발생하기 시작하였으며, 질산성질소의 농도가 1,000 mg/l로 증가할 경우에는 많은 양의 nitrite가 축적이 되어 탈질의 저해가 발생하여 탈질 속도가 감소하였다. 회분식 반응기의 결과를 바탕으로, 충전탑식 반응기에서 유입수의 초기 산화환원전위를 낮추기 위하여 유출수를 재순환시킨 결과, 유입수의 초기 산화화원전위를 150 mV에서 30 mV로 낮출 수 있었고, 유입수의 초기 질산성질소의 농도를 120 mg/l에서 85 mg/l까지 낮출 수 있었다. 그 결과 충전탑식 반응기에서 유출되는 질산성질소의 농도가 재순환을 하기 전에는 약 61 mg/l이었으나, 유출수의 재순환으로 질산성질소의 농도를 10 mg/l까지 낮출 수 있었고, 질산 성질소의 제거율을 49.2%에서 91.7%로 증가시킬 수 있었다.

환경요인이 $Fe^0$에 의한 TNT의 환원 반응속도에 미치는 영향 (The Effects of Environmental Conditions on the Reduction Rate of TNT by $Fe^0$)

  • 배범한
    • 한국토양환경학회지
    • /
    • 제5권2호
    • /
    • pp.87-97
    • /
    • 2000
  • 환원상태의 0가 금속 철($Fe^0$)에 의한 TNT의 환원반응율에 환경조건이 미치는 영향을 정량하기 위하여 회분식 반응조내의 초기 용존산소, HEPES완충액 및 전자전달체 Vitamin $B_{12}$의 농도를 변화하며 비반응상수를 측정하였다. 0가 금속 철에 의한 TNT의 환원은 모든 경우에서 유사 1차반응으로 측정되었으며, TNT의 환원시, 용액내 초기 용존산소의 농도가 높을수록 반응속도는 감소하였다. 그러나, 비반응상수는 초기용존산소의 농도에 선형적으로 비례하지 않았으며 용존산소 농도가 높아질수록 반응속도의 감소율은 감소하였다. HEPES 완충액을 사용하여 TNT환원의 비반응상수를 측정한 결과, HEPES 2.0mM용액을 사용하여 중성 부근의 pH를 유지하였을 경우 비반응속도가 5.8배 이상 증가하여 반응율은 수용액의 pH에 영향을 받는 것으로 확인되었다. 반응 속도의 증진을 위하여 전자 전달체(electron carrier or mediator) vitamin $B_{12}$를 첨가한 실험결과, vitamin $B_{12}$의 농도 8.0 $mu\textrm{g}$/L 에서 14.6배의 비반응상수의 증가가 관측되었다. 따라서, 0가 금속 철로 충진된 반응벽체를 사용하여 유기물을 제거하는 공법에서 Vitamin $B_{12}$의 첨가는 매우 유용한 처리효율 증진방안이 될 수 있다.

  • PDF

디젤유가 혼입된 엔진오일의 트라이볼로지 특성에 관한 실험적 연구 (Experimental Study on the Tribological Characteristics of Diluted Engine Oil by Diesel Fuel)

  • 김한구;김청균
    • Tribology and Lubricants
    • /
    • 제21권4호
    • /
    • pp.159-164
    • /
    • 2005
  • An experimental study was conducted to evaluate characteristic variation of diluted engine oils in which contains diesel fuels and its tribological effects on engine components. In this study, diluted engine oils with $10\%,\;15\%,\;and\;20\%$ of initial fuel content rate have been used for measuring the viscosity reduction rate, blow-by gas increment rate, main gallery pressure reduction rate, and fuel content rate in engine oils. These parameters are strongly related to the tribological characteristics of key engine components. The kinematic viscosity of engine oils in which is contained by diesel fuels from $10\%\;to\;20\%$ in oils is decreasing to approximately $54\%$ of initial diluted fuel-oil volume ratios. The experimental results show that the distillated engine oil decrease the viscosity of engine oil and its oil film stiffness, and increase the wear rate of rubbing parts of engine components. Thus we recommend that the containing volume rate of fuels in engine oils should be restricted to $3\~4\%$ for a sophisticated Diesel engine and $5\~7\%$ for a standard one.

Effects of Initial Inoculum Size, Liquid Volume and Medium Feeding Strategy on Panax ginseng Hairy Roots Growth

  • 정귀택;박돈희;황백
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.250-253
    • /
    • 2000
  • We researched effects of growth on initial inoculum size, liquid volume, and medium feeding rate etc. Cell suspension inoculated at low cell concentrations showed a typical growth reduction, whereas root cultures showed an improvement in growth. In this paper, Hairy roots showed high growth rate at 0.4 % inoculum size and 100 mL liquid volume in 250 mL flask cultures.

  • PDF