• 지구물리와물리탐사
• /
• 제2권4호
• /
• pp.167-173
• /
• 1999

탄성파 토모그래피 중에서 많이 사용되는 2차원 시추공-시추공 주시 토모그래피는 파선각이 제한됨에 따라 분해능이 저하되므로, 본 논문에서는 감소된 분해능을 향상시키기 위한 방법들을 검토해 보았다. 토모그래피 역산 과정은 파선의 위치 및 주시에 대한 오차에 민감하므로 선형 주시 보간법을 사용하여 파선을 추적하였으며, 다른 파선 추적법들에 의한 역산결과와 비교하여 좋은 결과를 얻을 수 있었다. 반복적 비선형 역산 과정에 있어서, 파선경로의 추적에 소요되는 계산 시간을 줄이기 위해서 일정 계산과정 동안 선형성을 고려하였으며 그 결과 빠른 수렴을 얻을 수 있었다. 일반적으로 역산과정에서는 적절한 초기 모델의 선정이 계산 결과에 많은 영향을 미치므로, 인공 신경망을 이용하여 획득된 주시로부터 초기속도 모델을 계산하였다. 지구물리학에서 인공 신경망법으로 많이 쓰이는 다층 전향 신경망은 내재된 단점들 때문에 좋은 결과를 얻을 수 없었으므로, 본 연구에서는 GRNN신경망을 이용하였다. 인공 신경망으로부터 계산된 초기모델을 역산에 사용함으로써 분해능을 향상시킬 수 있었다. 그러나 파선 투과각이 넓은 경우나 탐사 대상체가 매우 복잡한 구조를 가지는 경우에는 초기모델이 역산결과에 큰 영향을 주지 않았다. 지구물리학적 토모그래피에서는 파선의 투과각이 제한을 받게되는 경우가 많으므로, 이럴 경우 인공 신경망을 이용하여 초기 모델값을 계산함으로써 역산 결과 생성되는 단면도의 분해능을 향상시킬 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 2008

To evaluate high-resolution wind resources for local and coastal area with complex terrain was attemped to combine the prognostic MM5 mesoscale model with CALMET diagnostic modeling this study. Firstly, MM5 was simulated for 1km resolution, nested fine domain, with FDDA using QuikSCAT seawinds data was employed to improve initial meteorological fields. Wind field and other meteorological variables from MM5 with all vertical levels used as initial guess field for CALMET. And 5 surface and 1 radio sonde observation data is performed objective analysis whole domain cells. Initial and boundary condition are given by 3 hourly RDAPS data of KMA in prognostic MM5 simulation. Geophysical data was used high-resolution terrain elevation and land cover(30 seconds) data from USGS with MM5 simulation. On the other hand SRTM 90m resolution and EGIS 30m landuse was adopted for CALMET diagnostic simulation. The simulation was performed on whole year for 2007. Vertical wind field a hour from CALMET and latest results of MM5 simulation was comparison with wind profiler(KEOP-2007 campaign) data at HAENAM site.

• 지구물리와물리탐사
• /
• 제5권3호
• /
• pp.178-184
• /
• 2002

탄성파굴절법 탐사는 절차가 단순하고 경제적이기 때문에 대형 구조물 건설을 위한 지반조사나 지질조사에 널리 이용되고 있다. 본 연구에서는 굴절법 탐사자료에 Kirchhoff 구조보정 방법을 적용하여 다양한 모형자료의 반응을 알아보고, 이에 대한 결과를 고찰하여 굴절법 탐사 자료를 이용한 지하 경계면 영상화 기법의 적용성을 파악해보고자 하였다. 모형반응 계산에 필요한 인공주시곡선의 작성에는 Vidale(1988)이 제시한 알고리즘을 사용하였고, 모형에 따른 반응을 살펴보기 위해 2층, 3층 모형 및 불규칙한 지표면을 가지는 모형 등에 대해 다양하게 살펴보았다. 구조보정을 위한 초기 속도 모형으로는 실제 구조와 같은 모형, 토모그래피에 의한 역산 단면, 실제 구조를 평활화한 모형 등을 사용해 초기 속도 모형이 달라질 때 결과에 어떤 영향을 미치는가 살펴보았다. 각각의 모형에 본 연구에 사용된 기법을 적용해 본 결과 반사법 구조보정에 비해 초기 속도 모형에 더욱 민감하다는 것을 확인할 수 있었으며, 현장 자료에 적용되기 위해서는 적절한 초기속도모형을 결정해야 할 것임을 알 수 있었다.

• 한국산업정보학회논문지
• /
• 제10권4호
• /
• pp.54-64
• /
• 2005

인체 하지 근골격 시스템의 수학적 모델에 대해 최적제어 기법을 이용하여 최대 높이뛰기 운동을 재현하였다. 근육의 비선형 동적특성에 의해 순동역학 접근방법을 사용하였으며 최적제어는 최적화 프로그램인 마이크로 유전알고리즘과 VF02 비선형 최적화 프로그램을 적용하였다. 최대 높이뛰기 운동을 위한 근골격 모델에서 유전알고리즘만으로는 최적해를 얻을 수가 없었다. 유전알고리즘의 해를 비선형 최적화 프로그램의 초기 예측값으로 하여 도약시간에 따른 최적의 운동 신경자극도를 결정하였다. 이러한 접근방법은 초기의 인위적 예측값 없이 최대높이뛰기 운동에 대한 전역해를 제공하였다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1078-1082
• /
• 1997

The distance in load parameter space to the closest voltage collapse point provides the worst case power margin and the left eigenvector identifies the most effective direction to steer the system to maximize voltage stability under contingency. This paper presents the results of the comparative performance study of the algorithms, which are applicable to a large scale power system, for computing the closest saddle node bifurcation (CSNB) point. Dobson's iterative method converges with robustness. However the slow process of updating the load increasing direction makes the algorithm less efficient. The direct method converges very quickly. But it diverges if the initial guess is not very close to CSNB. Zeng's method of estimating the approximate critical point in the pre-determined direction is attractive in the sense that it uses only using load flow equations. However, the method is found to be less efficient than Dobson's iterative method. It may be concluded from the above observation that the direct method with the initial values obtained by carrying out the iterative method twice is most efficient at this time and more efficient algorithms are needed for on-line application.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.19-25
• /
• 2004

In this paper, we present a trellis-based blind channel estimation and equalization technique coupling two kinds of adaptive Viterbi algorithms. First, the initial blind channel estimation is accomplished by incorporating the list parallel Viterbi algorithm with the least mean square (LMS) updating approach. In this operation, multiple trellis mappings are preserved simultaneously and ranked in terms of path metrics. Equivalently, multiple channel estimates are maintained and updated once a single symbol is received. Second, the best channel estimate from the above operation will be adopted to set up the whole trellis. The conventional adaptive Viterbi algorithm is then applied to detect the signal and further update the channel estimate alternately. A small delay is introduced for the symbol detection and the decision feedback to smooth the noise impact. An automatic switch between the above two operations is also proposed by exploiting the evolution of path metrics and the linear constraint inherent in the trellis mapping. Simulation has shown an overall excellent performance of the proposed scheme in terms of mean square error (MSE) for channel estimation, robustness to the initial channel guess, computational complexity, and channel equalization.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.364-373
• /
• 1999

A combination of conjugate gradient and Levenberg-Marquardt method is used to estimate the spatially varying scattering coefficient, ${\sigma}(r)$, in the solid and hollow spheres by utilizing the measured transmitted beams from the solution of an inverse analysis. The direct radiation problem associated with the inverse problem is solved by using the $S_{12}-approximation$ of the discrete ordinates method. The accuracy of the computations increased when the results from the conjugate gradient method are used as an initial guess for the Levenberg-Marquardt method of minimization. Optical thickness up to ${\tau}_0=3$ is used for the computations. Three different values of standard deviation are considered to examine the accuracy of the solution from the inverse analysis.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.112-121
• /
• 2009

This paper deals with supersonic air-breathing missile system. A supersonic air-breathing missile system has very complicated and incoherent thrust characteristics with respect to outer and inner environment during operation. For this reason, the missile system has many maneuver constraints and is allowed to operate within narrow flight envelope. In this paper, trajectory optimization of the missile is accomplished. The trajectory optimization problem is formulated as a discrete parameter optimization problem. For this formulation, Legendre Pseudo-Spectral method is introduced. This method is based on calculating the state and control variables on Legendre-Gauss-Lobatto (LGL) points. This approach helps to find approximated derivative and integration quantities simply. It is shown that, for this trajectory optimization, trend analysis is performed from thrust characteristics on various conditions so that the trajectory optimization is accomplished with fine initial guess with these results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.212-217
• /
• 1993

A 2-dimensional FEM/GEM program was developed for analyzing forming processes of an arbitrarily shaped draw-die, in which plane strain condition is assumed and linear line elements are employed. FEM formulation adopted a new algorithm for solving force equilibrium as well as non-penetration condition simultaneously. For the case of numerical divergence at nearly final forming stages and the initial guess in Newton-Raphson iterations, geometric force equilibrium method(GEM) is also introduced. The developed program was tested with the simulation of stamping processes of automotive bonnet inner pannel in order to verify the usefulness and validity of FEM/GEM formulation.