• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.50-52
• /
• 2006

This paper Proposes a new method of on-line estimation for rotor resistance of the induction motor in the indirect vector controlled drive, using artificial neural network (ANN). The back propagation algorithm is used for training of the neural networks. The error between the desired state variable of an induction motor and actual state variable of a neural network model is back propagated to adjust the weight of a neural network model, so that the actual state variable tracks the desired value. The performance of rotor resistance estimator and torque and flux responses of drive, together with these estimators, are investigated variations rotor resistance from their nominal values. The rotor resistance are estimated analytically, using the proposed ANN in a vector controlled induction motor drive.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.4
• /
• pp.137-144
• /
• 2008

This study deals with on-line fault detection and diagnosis(FDD) for heat exchangers of a variable speed refrigeration system(VSRS) based on current information. The current residual which is the difference between real detected current from current sensors and estimated current from no fault model was utilized to diagnose faults of the heat exchangers. Comparing to the conventional FDD of constant refrigeration system based on temperature and pressure information, the suggested FDD method shows better robustness to the VSRS which has a feedback control loop. Moreover the suggested method can be expected more precise and faster diagnosis of faults about heat exchangers. Throughout some experiments, the validity of the method was verified.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.2
• /
• pp.99-105
• /
• 2005

A quality inspection procedure interchangeably using the performance and surrogate variables is proposed. At the start of the inspection, the continuous performance variable is measured for all items. As soon as iconsecutive items are found to be conforming, the continuous surrogate variable is measured instead of the performance variable. If an item is rejected, the inspection based on the performance variable is resumed. It is assumed that the performance variable and the surrogate variable are jointly normally distributed with known means and standard deviations. The average outgoing quality (AOQ) expression is derived, and the methods of finding the inspection procedure with a specified average outgoing quality limit (AOQL) are presented.

• Communications for Statistical Applications and Methods
• /
• v.26 no.2
• /
• pp.149-161
• /
• 2019

In this article, we suggest the following approaches to simultaneous variable selection and outlier detection. First, we determine possible candidates for outliers using properties of an intercept estimator in a difference-based regression model, and the information of outliers is reflected in the multiple regression model adding mean shift parameters. Second, we select the best model from the model including the outlier candidates as predictors using stochastic search variable selection. Finally, we evaluate our method using simulations and real data analysis to yield promising results. In addition, we need to develop our method to make robust estimates. We will also to the nonparametric regression model for simultaneous outlier detection and variable selection.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.638-644
• /
• 2004

Variable-gauge systems can be used for the fast and safe transportation in the railways with different gauges instead of transshipment or bogie-changing. The system will be necessary to connect the trans-Korean railway with the transcontinental railway effectively. In this paper, searches of patent information about variable-gauge system are conducted and the patent maps are analyzed to seize the overall image and trend of the technology field. The results can be a reference for determining the development direction of the variable-gauge system suitable in the north-east asian railway networks.

• Communications for Statistical Applications and Methods
• /
• v.4 no.1
• /
• pp.119-128
• /
• 1997

Added variable plot and component-plus-residual plot are very useful for studying the role of a predictor in classical regression analysis. The former is usually used to check the effect of adding a new variable to existing model. The latter has been suggested as computationally convenient substitutes for the added variable plots, however, this plot is found to be better in detecting nonlinear relationships of a new predictor. By combining these two plots dynamically, we can take advantages of two plots simultaneously. And even further, we can get some knowledge of collinearity between a new predictor and predictors already in the model, and more accurate information about the possible outliers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.3
• /
• pp.262-268
• /
• 1988

In this paper conditions are derived, which ensure the existence of a quasi-sliding mode on the control switching hyperplane in discrete variable structure control systems and also remove the reaching phase problem observed in continuous-time variable structure systems. In addition, a discrete variable structure tracking controller which has adaptive properties is devised based on these results. This controller has useful properties, such as small sensitivity to the variation of plant parameters and to disturbances and its performing speed is fast compared to that of other adaptive controller.

• Journal of the Korean Mathematical Society
• /
• v.42 no.3
• /
• pp.517-527
• /
• 2005

This paper considers a discrete-time queueing system with variable service capacity. Using the supplementary variable method and the generating function technique, we compute the joint probability distribution of queue length and remaining service time at an arbitrary slot boundary, and also compute the distribution of the queue length at a departure time.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.164-171
• /
• 2012

Variable step size maximum power point trackers (MPPTs) are widely used in photovoltaic (PV) systems to extract the peak array power which depends on solar irradiation and array temperature. One essential factor which judges system dynamics and steady state performances is the scaling factor (N), which is used to update the controlling equation in the tracking algorithm to determine a new duty cycle. This paper proposes a novel stability study of variable step size incremental resistance maximum power point tracking (INR MPPT). The main contribution of this analysis appears when developing the overall small signal model of the PV system. Therefore, by using linear control theory, the boundary value of the scaling factor can be determined. The theoretical analysis and the design principle of the proposed stability analysis have been validated using MATLAB simulations, and experimentally using a fixed point digital signal processor (TMS320F2808).

• The Journal of Information Technology and Database
• /
• v.6 no.2
• /
• pp.1-18
• /
• 1999

The purpose of this study was to identify the effect of microcomputer networking on user perception of potential threats to security employing user attitudes as a moderating variable. A research model consisting of microcomputer networking as the independent variable, user perception of potential threats to security as the dependent variable, and user attitude toward security control as the moderating variable was developed through literature review. The results of this study provide an empirical evidence of the importance of environmental change(information systems networking) on user perception of potential threats to security. Further-more the result imply that in order to improve security performance through the reinforcement of user perception of threats to security in the organization, user attitudes should be made favorable.