• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1875-1877
• /
• 2002

There exist several forms of transfer function descriptions for multivariable LTI systems. We treat transfer function matrix with characteristic polynomial as its common denominator named Characteristic Transfer-function Matrices (CTM). First, we clarify necessary and sufficient conditions of CTM, then, we show some related lemmas. These interpretations not only offer deeper explanations but they also provide ways for calculations of all possible transfer matrices, system zeros, and inverse polynomial matrices.

• Journal of the Korean Data and Information Science Society
• /
• 제14권1호
• /
• pp.11-21
• /
• 2003

In 1997 a new educational system that allows student to transfer between and within universities was first introduced. As a result, most colleges of basic arts and sciences face a serious problem since quite a few students there have transferred or seems to want to transfer. In this paper we study a problem of building a forecasting neural network for students who can possibly transfer.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.931-943
• /
• 2018

Wireless power transfer (WPT) technology has been the focus of a lot of research due to its safety and convenience. The Z-source inverter (ZSI) was introduced into WPT systems to realize improved system performance. The ZSI regulates the dc-rail voltage in WPT systems without front-end converters and makes the inverter bridge immune to shoot-through states. However, when the WPT system is combined with a ZSI, the system parameters must be configured to prevent the ZSI from entering an "accidental shoot-through" (AST) state. This state can increase the THD and decrease system power and efficiency. This paper presents a mathematical analysis for the characteristics of a WPT system and a ZSI while addressing the causes of the AST state. To deal with this issue, the impact of the system parameters on the output are analyzed under two control algorithms and the primary compensation capacitance range is derived in detail. To validate the analysis, both simulations and experiments are carried out and the obtained results are presented.

• 한국정보처리학회논문지
• /
• 제4권12호
• /
• pp.3139-3149
• /
• 1997

전자 메일시스템은 정보 전송을 위해서 널리 사용되어 왔다. 멀티미디어의 기술이 발전하면서 많은 인터넷 서비스가 멀티미디어를 지원한다. 전자 메일 시스템은 RFC 821에 의한 SMTP(simple Mail Transfer Protocol)에 의해서 7bit ASCH 정보의 전송만을 담당한다. 따라서 전자 메일시스템은 멀티미디어 데이타의 저작 및 전송을 지원할 수 없다. 본 연구에서는 메시지 통합성을 제공할 수 있는 멀티미디어 메일 저작 시스템을 개발하였다. 본 시스템을 통해서 멀티미디어 메시지는 저작되고 텍스트의 형태로 변환된다. 변환된 메시지는 전송 측의 MTA (Mall Transfer Agent)에서 수신 측의 MTA로 SMTP를 통해서 전송된다. 메시지는 HTML(Hypertext Markup Language) 구문에 따라 텍스트 뿐만 아니라 이미지, 오디오 그리고 동영상등을 포함하여 저작된다. 따라서 본 시스템은 다양한 미디어들로 구성된 통합된 메시지를 제공해준다. 멀티미디어 메시지를 SMTP로 전송할 있는 형태의 데이타로 변환하기 위해서 BASE64 인코딩 방법을 사용하였다. 전달받은 멀티미디어 메시지는 본 연구에서 제안된 MUA(Multimedia User Agent)에 의해서 관리된다. 본 시스템은 사용자의 편의성을 향상시켰다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.13-19
• /
• 2018

Wireless power transfer (WPT) based on magnetic resonant coupling is a promising technology in many industrial applications. Efficiency of the WPT system usually depends on the tilt angle of the transmitter or the receiver coil. This work analyzes the effect of the tilt angle on the efficiency of the WPT system with horizontal misalignment. The mutual inductance between two coils located at arbitrary positions with tilt angles is calculated using a numerical analysis based on the Neumann formula. The efficiency of the WPT system with a tilted coil is extracted using an equivalent circuit model with extracted mutual inductance. By analyzing the results, we propose an optimal tilt angle to maximize the efficiency of the WPT system. The best angle to maximize the efficiency depends on the radii of the two coils and their relative position. The calculated efficiencies versus the tilt angle for various WPT cases, which change the radius of RX ($r_2=0.075m$, 0.1 m, 0.15 m) and the horizontal distance (y=0 m, 0.05 m, 0.1 m), are compared with the experimental results. The analytically extracted efficiencies and the extracted optimal tilt angles agree well with those of the experimental results.

• 한국통신학회논문지
• /
• 제18권2호
• /
• pp.288-299
• /
• 1993

본 논문은 단일 버스를 사용한 밀결합 다중프로세서 시스템에서 데이타 전송량을 극대화하기 위해 파이프라인 전송 기능을 가지는 버스 프로토콜를 제안한다. 이 버스는 어드레스와 데이타의 전송을 위해 독립적인 전송 통로와 블록 전송기능을 두고, 최애 264 Mbytes/sec 데이타의 전송 능력을 가진다. 이버스를 기반으로 각각의 프로세서 보드의 내부에 캐쉬를 포함한 다중프로세서 시스템을 모델링하고, 시뮬레이션를 통해 캐쉬의 메모리의 참조율 변화에 따른 버스의 성능 및 시스템의 성능을 평가한다. 본 버스를 이용할 경우 10개 까지의 프로세서 보드가 버스에 장착되어도 버스가 포화되지 않고, 4개 까지의 메모리의 인디리빙에 대하여 성능이 선형적으로 증가함을 알 수 있다.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.227-235
• /
• 2004

This paper presents a new theoretical approach to energy-based power system analysis for multibus power transmission systems. On the basis of mechanical analogy, an exact energy integral expression is derived for lossy multi-bus systems through rigorous energy analysis. A simple rigid rod model of mechanical power transfer system is introduced to address the physical meanings of potential energy terms associated with transfer conductances as well as transfer susceptances. Finally, energy-based analysis has been proposed to show that the energy function has all information of the power system characteristics.

• 소성∙가공
• /
• 제7권6호
• /
• pp.545-553
• /
• 1998

The purpose of this paper is to develop a CAD/CAM system for generation of designing and manufacturing information such as total drawing sub-assembly drawing, part drawing detail drawing part list and NC data for machining by CNC lathe were CUT machining center. Through this study the CAD/CAM system for deep drawing transfer die in mechanical press process has been developed The developed CAD system can generate the drawings of transfer die in mechanical press. Using these results from CAD system. it can generate NC data to machine die's elements on the CAD system. This system can reduce design man-hours and human errors. In order to construct the system it is used to automate the design process using knowledge base system. The developed system is based on the knowledge base system which is involved a lot of expert's empirical knowhow in the practice field. Using AutoLISp language under the Auto CAD system. CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and manufacturer in this field

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5943-5962
• /
• 2017

A resource allocation algorithm based on simultaneous wireless information and power transfer (SWIPT) to maximize the system throughput is proposed in orthogonal frequency division multiplexing (OFDM) relay networks. The algorithm formulates the problem under the peak power constraints of the source and each subcarrier (SC), and the energy causality constraint of the relay. With the given SC allocation of the source, we give and prove the optimal propositions of the formulated problem. Then, the formulated problem could be decomposed into two separate throughput maximization sub-problems by setting the total power to transfer energy. Finally, several SC allocation schemes are proposed, which are energy priority scheme, information priority scheme, balanced allocation scheme and exhaustive scheme. The simulation results reveal that the energy priority scheme can significantly reduce computational complexity and achieve approximate performance with the exhaustive scheme.