DOI QR코드

DOI QR Code

Analysis and Optimization of Wireless Power Transfer Efficiency Considering the Tilt Angle of a Coil

  • Huang, Wei (Department of Electronics Information and Communication Engineering, Konkuk University) ;
  • Ku, Hyunchul (Department of Electronics Information and Communication Engineering, Konkuk University)
  • Received : 2017.09.01
  • Accepted : 2017.11.22
  • Published : 2018.01.31

Abstract

Wireless power transfer (WPT) based on magnetic resonant coupling is a promising technology in many industrial applications. Efficiency of the WPT system usually depends on the tilt angle of the transmitter or the receiver coil. This work analyzes the effect of the tilt angle on the efficiency of the WPT system with horizontal misalignment. The mutual inductance between two coils located at arbitrary positions with tilt angles is calculated using a numerical analysis based on the Neumann formula. The efficiency of the WPT system with a tilted coil is extracted using an equivalent circuit model with extracted mutual inductance. By analyzing the results, we propose an optimal tilt angle to maximize the efficiency of the WPT system. The best angle to maximize the efficiency depends on the radii of the two coils and their relative position. The calculated efficiencies versus the tilt angle for various WPT cases, which change the radius of RX ($r_2=0.075m$, 0.1 m, 0.15 m) and the horizontal distance (y=0 m, 0.05 m, 0.1 m), are compared with the experimental results. The analytically extracted efficiencies and the extracted optimal tilt angles agree well with those of the experimental results.

Keywords

References

  1. N. Shinohara, "Wireless power transmission progress for electric vehicle in Japan," in Proceedings of 2013 IEEE Radio and Wireless Symposium (RWS), Austin, TX, 2013, pp. 109-111.
  2. C. Park, S. Lee, G. H. Cho, S. Y. Choi, and C. T. Rim, "Two-dimensional inductive power transfer system for mobile robots using evenly displaced multiple pickups," IEEE Transactions on Industry Applications, vol. 50, no. 1, pp. 558-565, 2014. https://doi.org/10.1109/TIA.2013.2271604
  3. M. Kesler, "Highly resonant wireless power transfer: safe, efficient, and over distance," WiTricity Corporation, Watertown, MA, 2013.
  4. Y. Zhang, Z. Zhao, and K. Chen, "Load matching analysis of magnetically-coupled resonant wireless power transfer," in Proceedings of 2013 IEEE ECCE Asia Downunder (ECCE Asia), Melbourne, Australia, 2013, pp. 788-792.
  5. D. Ahn and S. Hong, "Effect of coupling between multiple transmitters or multiple receivers on wireless power transfer," IEEE Transactions on Industrial Electronics, vol. 60, no. 7, pp. 2602-2613, 2013. https://doi.org/10.1109/TIE.2012.2196902
  6. P. Kong and H. Ku, "Efficiency optimising scheme for wireless power transfer system with two transmitters," Electronics Letters, vol. 52, no. 4, pp. 310-312, 2016. https://doi.org/10.1049/el.2015.3736
  7. A. P. Sample, D. T. Meyer, and J. R. Smith, "Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer," IEEE Transactions on Industrial Electronics, vol. 58, no. 2, pp. 544-554, 2011. https://doi.org/10.1109/TIE.2010.2046002
  8. J. A. Taylor, Z. N. Low, J. Casanova, and J. Lin, "A wireless power station for laptop computers," in Proceedings of 2010 IEEE Radio and Wireless Symposium (RWS), New Orleans, LA, 2010, pp. 625-628.
  9. N. Shinohara, Y. Kubo, and H. Tonomura, "Mid-distance wireless power transmission for electric truck via microwaves," in Proceedings of 2013 URSI International Symposium on Electromagnetic Theory (EMTS), Hiroshima, Japan, 2013, pp. 841-843.
  10. K. Fotopoulou and B. W. Flynn, "Wireless power transfer in loosely coupled links: coil misalignment model," IEEE Transactions on Magnetics, vol. 47, no. 2, pp. 416-430, 2011. https://doi.org/10.1109/TMAG.2010.2093534
  11. L. Tan, H. Qiang, X. Huang, W. Cao, and W. Sun, "A novel optimization means of transfer efficiency for resonance coupled wireless power transfer," Indonesian Journal of Electrical Engineering and Computer Science, vol. 11, no. 5, pp. 2747-2752, 2013.
  12. S. Ramo, J. R. Whinnery, and T. van Duzer, Fields and Waves in Communication Electronics. New York, NY: John Wiley & Sons, 2008.

Cited by

  1. Toroidal-Shaped Coils for a Wireless Power Transfer System for an Unmanned Aerial Vehicle vol.19, pp.1, 2019, https://doi.org/10.26866/jees.2019.19.1.48
  2. Evaluation of Specific Absorption Rate in Three-Layered Tissue Model at 13.56 MHz and 40.68 MHz for Inductively Powered Biomedical Implants vol.9, pp.6, 2018, https://doi.org/10.3390/app9061125
  3. Highly Efficient, Flexible Wireless‐Powered Circuit Printed on a Moist, Soft Contact Lens vol.4, pp.5, 2019, https://doi.org/10.1002/admt.201800671
  4. Design of a very high frequency stretchable inverted conical helical antenna for maritime search and rescue applications vol.62, pp.1, 2018, https://doi.org/10.1002/mop.32004
  5. Free-Positioning Wireless Power Transfer Using a 3D Transmitting Coil for Portable Devices vol.20, pp.4, 2020, https://doi.org/10.26866/jees.2020.20.4.270
  6. Transmission Distance Improvement of a Two-Coil Magnetic Resonance Wireless Power Transmission System Using Transformers vol.21, pp.4, 2018, https://doi.org/10.26866/jees.2021.4.r.41