• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.791-793
• /
• 2016

In the development of various types of sensor technology, the general users smartphone, the environment is increased, which can be seen in contact with the movement recognition device, such as a console game machine (Nintendo Wii), an increase in the user needs of the action recognition-based input device there is a tendency to have. Mouse existing behavior recognition, attached to the outside, is mounted in the form of mouse button is deformed, the left mouse was the role of the right button and a wheel, an acceleration sensor (or a gyro sensor) inside to, plays the role of a mouse cursor, is to manufacture a compact, there is a difficulty in operating the button, to apply a motion recognition technology is used to operate recognition technology only pointing cursor is limited. Therefore, in this paper, using a MEMS-based motion-les Koguni tion sensor (Motion Recognition Sensor), to recognize the behavior of the two points of the human body (thumb and forefinger), to generate the motion data, and this to the foundation, compared to the pre-determined matching table (moving and mouse button events cursor), and generates a control signal by determining, were studied the generated control signal input device of the computer wirelessly transmitting.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.317-320
• /
• 2002

Recently, AMBA(Advanced Microcontroller Bus Architecture) is used as common system bus at embedded system. In this paper, we described test method of peripheral device which is connected to AMBA according to the bus interface defined by AMBA protocol We implemented one of the APB(Advanced Peripheral Bus) peipheral module, GPIO(General Purpose Input/output), and tested its functionality as il is connected to the AMBA system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.35-41
• /
• 2013

An efficient multi-stage rectifier for wireless power transfer in deep implant medical devices is implemented using $0.18-{\mu}m$ CMOS technology. The presented three-stage rectifier employs a cross-coupled topology to boost a small input AC signal from the external device to produce a 1.2-1.5 V output DC signal for the implant device. The designed rectifier achieves a maximum measured power conversion efficiency of 70% at 13.56 MHz under the conditions of a low 0.6-Vpp RF input signal with a $10-k{\Omega}$ output load resistance.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.439-442
• /
• 2002

We present in this Paper a microwave Power sensor fabricated by a standard CMOS process and a bulk micromachining process. The sensor consists of a CPW transmission line, a resistor as a healer, and thermocouple arrays. An input microwave heater, the resistor so that the temperature rises proportionally to the microwave power and tile thermocouple arrays convert it to an electrical signal. The sensor uses air bridged 8round of CPW realized by wire bonding to reduce tile device size and cost and to improve the thermal impedance. Al/poly-Si junctions are used for the thermocouples. Poly-Si is used for tile resister and Aluminium is for transmission line. The resistor and hot junctions of the thermocouples are placed on a low stress silicon nitride diaphragm to minimize a thermal loss. The fabricated device operates properly from 1㎼ to 100㎽\ulcorner of input power. The sensitivity was measured to be ,3.2～4.7 V/W.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.66-79
• /
• 1999

We investigate the effects of high input power on the performance of optical bistable symmetric self-electooptic effect devices (S-SEEDs) using extremely shallow quantum wells (ESQWs). In this study, we consider the four ESQWs SEEDs; anti-reflection (AR)-coated ESQWs S-SEED, back-to-back AR coated ESQWs S-SEED, asymmetric F뮤교-Perot (AFP) ESQWs S-SEED, and back-to-back AFP-ESQWs S-SEED. As the input power increases, device performances such as on/off contrast ratio, on/off reflectivity difference are seriously degraded because of ohmic heating and exciton saturation. On the other hand, switching speed of the device increases up to certain value and then begins to decrease. With reasonable optimization of the input power for the best switching speed operation of the devices in a cascading optical interconnection system, we simulate and analyze the system bit-rate of the various ESQWs S-SEEDs, for a mesa of $5{\times}5{\mu}m^2$ size, changing the namber of quantum wells for the external bias of 0 V and -5V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2470-2476
• /
• 1997

We propose a simle scheme for detecting tone signals narrowly spaced in the frequency by employing a nonlinear device called Teager's energy tracker. When the input signal is a tone signal, the output of Teager's energy tracker is proportional to the energy and tone frequency of the input signal. When the envelope of the input tone is varying, this tracker can also track the energy of the envelope. By employing Teager's algorithm as a preprocessor, the detector for narrowly spaced tone signals can be implemented without the use of sharp notch filters. As an example, the proposed detector is applied to distinguishing ITU-T V.8 and V.25 tone signals. The detector perfodrmance is analyszed and is verified by computer simulation.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.499-510
• /
• 2013

Hardware-Software co-simulation of a multiple image encryption technique shall be described in this paper. Our proposed multiple image encryption technique is based on the Latin Square Image Cipher (LSIC). First, a carrier image that is based on the Latin Square is generated by using 256-bits of length key. The XOR operation is applied between an input image and the Latin Square Image to generate an encrypted image. Then, the XOR operation is applied between the encrypted image and the second input image to encrypt the second image. This process is continues until the nth input image is encrypted. We achieved hardware co-simulation of the proposed multiple image encryption technique by using the Xilinx System Generator (XSG). This encryption technique is modeled using Simulink and XSG Block set and synthesized onto Virtex 2 pro FPGA device. We validated our proposed technique by using the hardware software co-simulation method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.555-558
• /
• 2017

In this paper, we designed a power supply AC LED driving device which can display uniform power consumption and light efficiency even when AC power of different size is applied. By setting input voltages and deviations of different sizes, it is confirmed that the electric light characteristics are the same at two input voltages. In addition, according to peak voltage of AC power, improper lighting caused in specific LED section is improved, and LED lighting of all sections is implemented in all commercial AC input voltage.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.86-93
• /
• 2019

The purpose of this study is to develop walk score application GUI in a smart device for improving user convenience. This study uses the walk score dataset of Seoul City developed in previous studies. Application GUI consists of five parts: address input window and search button, detail information (address, latitude, longitude, walk score), window switching and input window for a number of data, data input window, and menu button. For verifying application GUI, this study uses 12 locations (sets of address, latitude, longitude, and walk score) near Gangnam Station and Myungdong Station in Seoul in several scenarios. First, this study checks if the application has been implemented with address and keyword search options. Then, new data insertion and file output operations are evaluated. The application system developed in this study operated properly in all scenarios. This walk score application can be a useful device in our daily lives.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.268-284
• /
• 2017

The dorsal hand vein biometric system developed has a main objective and specific targets; to get an electronic signature using a secure signature device. In this paper, we present our signature device with its different aims; respectively: The extraction of the dorsal veins from the images that were acquired through an infrared device. For each identification, we need the representation of the veins in the form of shape descriptors, which are invariant to translation, rotation and scaling; this extracted descriptor vector is the input of the matching step. The optimization decision system settings match the choice of threshold that allows accepting/rejecting a person, and selection of the most relevant descriptors, to minimize both FAR and FRR errors. The final decision for identification based descriptors selected by the PSO hybrid binary give a FAR =0% and FRR=0% as results.