• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.13-16
• /
• 2014

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by fast refreshing images, and we realized the ratio of refresh time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional driving signal cannot follow fast on-off speed, so we evaluated new signal generator using SDI (Serial Data Interface) mode signal generator. We realized articulate image generation similar to CRT by high fast full HD (High Definition) signals and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Korean Journal of Cognitive Science
• /
• v.16 no.4
• /
• pp.333-349
• /
• 2005

In this paper, we propose a real tine moving object tracking system based on block-based image processing technique and human visual processing. The system has two nun features. First, to take advantage of the merit of the biological mechanism of human retina, the system has two cameras, a CCD(Charge-Coupled Device) camera equipped with wide angle lens for more wide scope vision and a Pan-Tilt-Zoon tamers. Second, the system divides the input image into a numbers of blocks and processes coarsely to reduce the rate of tracking error and the processing time. Tn an experiment, the system showed satisfactory performances coping with almost every noisy image, detecting moving objects very int and controlling the Pan-Tilt-Zoom camera precisely.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.65-71
• /
• 2014

This paper present the multi-modal user distance estimation system using mono camera and mono microphone basically equipped with a mobile device. In case of a distance estimation method using an image, we is estimated a distance of the user through the skin color region extraction step, a noise removal step, the face and eyes region detection step. On the other hand, in case of a distance estimation method using speech, we calculates the absolute difference between the value of the sample of speech input. The largest peak value of the calculated difference value is selected and samples before and after the peak are specified as the ROI(Region of Interest). The samples specified perform FFT(Fast Fourier Transform) and calculate the magnitude of the frequency domain. Magnitude obtained is compared with the distance model to calculate the likelihood. We is estimated user distance by adding with weights in the sorted value. The result of an experiment using the multi-modal method shows more improved measurement value than that of single modality.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.255-261
• /
• 2014

Advances of digital device technology such as digital cameras, smart phones and tablets, provide convenience way for people to take pictures during his/her life. Photo data is being spread rapidly throughout the social network, causing the excessive amount of data available on the internet. Photo retrieval is categorized into three types, which are: keyword-based search, example-based search, visualize query-based search. The commonly used multimedia search methods which are implemented on Smart TV are adapting the previous methods that were optimized for PC environment. That causes some features of the method becoming irrelevant to be implemented on Smart TV. This paper proposes a novel Visual Query-based Photo Retrieval Method in Smart TV Environment using a motion sensing input device known as Kinect Sensor. We detected hand gestures using kinect sensor and used the information to mimic the control function of a mouse. The average precision and recall of the proposed system are 81% and 80%, respectively, with threshold value was set to 0.7.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.580-587
• /
• 2003

In this paper, we introduce a novel model to analyze the linearity of a TW-EAM (traveling-wave electroabsorption modulator). The device length, microwave loss (ML), and internal reflection (IR) due to impedance mismatch have effect on the linearity of a TW-EAM. The longer devices have characteristics of lower biases with minimum IMDS (intermodulation distortions). ML decreases the output power as well as the IMD value. Internal reflection has different nonlinear characteristics according to the wavelength of the input frequency and the device length. There is little change in SFDR (spurious-free dynamic range) due to ML or IR. As a result, for a 50 GHz band RF-optical communication system, a 0.8 mm-long TW-EAM with the lowest ML would have better properties by using n, which is caused by impedance, mismatch at the output port.

• KNOM Review
• /
• v.22 no.1
• /
• pp.52-59
• /
• 2019

As the video streaming service are supported by various devices, the amount of usage increases and efforts to improve the service from the viewpoint of users have continued. When a user watches a video, a response time occurs from input to playback, and if this response time becomes longer, the user's service satisfaction decreases. In this paper, we are proposing a method prefetching each user's preference video data obtained by analyzing user's past history record to the device for reducing the response time. We will show the result that prefetching data can improve the response time to 41% at most. And we analyzed real-video streaming viewing record and got each user's preferred video list. We investigated the change of response time according to a hit-ratio and amount of overhead data that was prefetched to the device, but not viewed. It was shown that as the hit-ratio grows bigger, the improvement of response time becomes more effective.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.323-332
• /
• 2006

Information devices such as a cellular phone, smart phone, and PDA become smaller to such an extent that people put them into their pockets without any difficulties. This drastic miniaturization causes to deteriorate the readability of text-based contents. The morphological characteristics of size and proportion are supposed to have close relationships with the pocketability and text readability of mobile information devices. This research was aimed to investigate the optimal morphological characteristics to satisfy the two usability factors together. For this purpose, we conducted an controlled experiment, which was designed to evaluate the pocketability according to $size(4000mm^2/8000mm^2)$, proportion(1:1/2:1/3:1), and weight(100g/200g) of information devices as well as participants' pose and carrying method. In the case of male participants putting the models of information device into their pockets, 2:1 morphological proportion was preferred. On the other hand, the female participants carrying the models in their hands preferred 2:1 proportion$(size:4000mm^2{\times}2mm)$ and 3:1 proportion$(size:8000mm^2{\times}20mm)$. For the device in the size of $4000mm^2$, it was found that the weight of device has an significant effect on pocketability. In consequence, 2:1 proportion is optimal to achieve better pocketability. The second experiment was about how text readability is affected by size $(2000mm^2/4000mm^2/8000mm^2)$ and proportion(1:1/2:1/3:1) of information devices as well as interlinear space of displayed text(135%/200%). From this experiment result, it was found that reading speed was increased as line length increased. Regarding the subjective assessment on reading task, 2:1 proportion was strongly preferred. Based on these results, we suggest 2:l proportion as an optimal proportion that satisfy pocketability of mobile information devices and text readability displayed on the screen together. To apply these research outputs to a practical design work efficiently, it is important to take into account the fact that the space for input devices is also required in addition to a display screen.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.8-18
• /
• 2007

In this paper, a 4bit cell way structure of PoRAM and the sensing method to drive this structure are researched. PoRAM has a different operation from existing SRAM and DRAM. The operation is that when certain voltage is applied between top electrode and bottom electrode of PoRAM device we can classify the cell state by measuring cell current which is made by changing resistance of the cell. In the decoder selected by new-addressing method in the cell array, the row decoder is selected "High" and the column decoder is selected "Low" then certain current will flow to the bit-line. Because this current is detect, in order to make large enough current, the voltage sense amplifier is used. In this case, usually, 1-stage differential amplifier using current mirror is used. Furthermore, the detected value at the cell is current, so a diode connected NMOSFET, that is, a device resistor is used at the input port of the differential amplifier to converter current into voltage. Using this differential amplifier, we can classify the cell states, erase mode is "Low" and write mode is "High", by comparing the input value, Vin, that is a product of current value multiplied by resistor value with a reference voltage, Vref.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.2 s.14
• /
• pp.66-73
• /
• 2003

Building construction projects are performed by a number of sub-contractors specialized in diverse trades. Therefore information management among these constituents is quite challenging especially due to exponentially increasing manpower and material resources. In recognition of the importance of information management in project sites a number of systems have been suggested, but the application is limited one of the main reason is that general contractors use these systems and sub-contractor's participation understanding and financial ability are limited. Besides other problems such as loss along communication channel, distortion of information due to inefficient input device and tremendous amount of time and labor are required for collection analysis, and management of information to prepare a daily-report. Therefore the Purpose of this study is to improve reporting process through analyzing current daily reporting system. This paper also suggests the direction of the improved daily reporting system to enhance the performance of construction projects through incorporating sub-contractor's participation in daily reporting system.