• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.875-878
• /
• 1998

In this paper, an adaptive event detection algorithm is proposed, for which we use the statistics of subblock image and adaptive threshold levels. The adaptive threshold level for a parameter binarization is taken by averaging the corresponding paramerter obtained from several input images. As simulation results, it is shown that the proposed algorithm is much more adaptive to the input images and effective in event detection rate than the conventional difference based algorithms.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.117-120
• /
• 2002

In this paper, we construct cryptographic accelerators using hardware Implementations of HMACS based on a hash algorithm such as MD5.It is basically a secure version of his previous algorithm, MD4 which is a little faster than MD5 The algorithm takes as Input a message of arbitrary length and produces as output a 128-blt message digest The input is processed In 512-bit blocks In this paper, new architectures, Iterative and full loop, of MD5 have been implemented using Field Programmable Gate Arrays(FPGAS). For the full-loop design, the performance Is about 500Mbps @ 100MHz

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.15-26
• /
• 2019

In recent years, researchers are increasingly trying to use BIM-based 3D models for BIM nD design such as 4D (3D + Time) and 5D (4D + Cost). However, there are still many problems in efficiently using process management based on the BIM information created at each design stage. Therefore, this study proposes a method to automate 4D and 5D design support in each design stage by using BIM-based Dynamo algorithm. To do this, I implemented an algorithm that can automatically input the process information needed for 4D and 5D by using Revit's Add-in program, Dynamo. In order to support the 4D design, the algorithm was created to enable automatic process simulation by synchronizing process simulation information (Excel file) through the Navisworks program, BIM software. The algorithm was created to automatically enable process simulation. And to support the 5D design, the algorithm was developed to enable automatic extraction of the information needed for mass production from the BIM model by utilizing the dynamo algorithm. Therefore, in order to verify the 4D and 5D design support algorithms, we verified the applicability through consultation with related workers and experts. As a result, it has been demonstrated that it is possible to manage information about process information and to quickly extract information from design and design changes. In addition, BIM data can be used to manage and input the necessary process information in 4D and 5D, which is advantageous for shortening construction time and cost. This study will make it easy to improve design quality and manage design information, and will be the foundation for future building automation research.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.73-76
• /
• 2001

It is well-known that the convergence rate gets worse when an input signal to an adaptive filter is correlated. In this paper we propose a new adaptive filtering algorithm that makes the convergence rate highly improved even for highly correlated input signals. By introducing an orthogonal constraint between successive input signal vectors, we overcome the slow convergence problem caused by the correlated input signal. Simulation results show that the proposed algorithm yields highly improved convergence speed and excellent tracking capability under both time-invariant and time varying environments, while keeping both computation and implementation simple.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.90-94
• /
• 2008

It is well-blown that the convergence rate gets worse when an input signal to an adaptive filter is correlated. In this paper we propose a new adaptive filtering algorithm that makes the convergence rate much improved even for highly correlated input signals. By introducing an orthogonal constraint between successive input signal vectors we overcome the slow convergence problem of the LMS algorithm with the correlated input signal. Simulation results show that the proposed algerian yields fast convergence speed and excellent tracking capability under both time-invariant and time-varying environments, while keeping both computation and implementation simple.

• Journal of Korea Multimedia Society
• /
• v.21 no.3
• /
• pp.333-341
• /
• 2018

In this paper, we propose an algorithm to automatically detect gait's joints. The proposed method classifies gait's types into front gait and flank gait so as to automatically detect gait's joints. And then according to classified types, the proposed applies joint extracting algorithm to input images. Firstly, we split input images into foreground image using difference images of Hue and gray-scale image of input and background one and extract gait's object. The proposed method classifies gaits into front gait and flank gait using ratio of Face's width to torso's width. Then classified gait's type, joints are detected 10 at front gait and detected 7~8 at flank gait. The proposed method is applied to the camera's input and the result shows that the proposed method automatically extracts joints.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.23-29
• /
• 2004

In this paper we analyze convergence constraints and time constant of IT-LMS algorithm and derive a method of making it's time constant independent of signal power by using input variance estimation. The method for estimating the input variance is to use a single-pole low-pass filter(LPF) with common smoothing parameter value, θ. The estimator is with narrow bandwidth for large θ but with wide bandwidth for small θ. This small θ gives long term average estimation(low frequency) of the fluctuating input variance well as short term variations (high frequency) of the input power. In our simulations of multipath communication channel equalization environments, the method with large θ has shown not as much improved convergence speed as the speed of the original IT-LMS algorithm. The proposed method with small θ=0.01 reach its minimum MSE in 100 samples whereas the IT-LMS converges in 200 samples. This shows the proposed, tap-power normalized IT-LMS algorithm can be applied more effectively to digital wireless communication systems.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.485-494
• /
• 2000

In this work, a fuzzy neural network is used to estimate the relevant sensor signal using other sensor signals. Noise components in input signals into the fuzzy neural network are removed through the wavelet denoising technique . Principal component analysis (PCA) is used to reduce the dimension of an input space without losing a significant amount of information. A lower dimensional input space will also usually reduce the time necessary to train a fuzzy-neural network. Also, the principal component analysis makes easy the selection of the input signals into the fuzzy neural network. The fuzzy neural network parameters are optimized by two learning methods. A genetic algorithm is used to optimize the antecedent parameters of the fuzzy neural network and a least-squares algorithm is used to solve the consequent parameters. The proposed algorithm was verified through the application to the pressurizer water level and the hot-leg flowrate measurements in pressurized water reactors.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1455-1458
• /
• 2002

In this paper, we propose a modified CP-AFC(Cross-Product Automatic Frequency Control) algorithm to enhance coherent signal detection for WCDMA reverse link receiver. We introduce a moving average filter at the FDD(Frequency Difference Detector) input to increase the number of cross-products, since pilot symbol in WCDMA is not transmitted continuously. We also add normalization algorithm to overcome the conventional CP-FDD's sensitivity to the variance of input signal amplitude and to increase the linear range of S- curve. For rapid frequency acquisition and tracking, we adopt a multi-stage tracking mode. We applied the proposed algorithm in the implementation of WCDMA base station modem successfully.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3455-3474
• /
• 2018

As a unique form of signed-digit representation, non-adjacent form (NAF) minimizes Hamming weight by removing a stream of non-zero bits from the binary representation of positive integer. Thanks to this strong point, NAF has been used in various applications such as cryptography, packet filtering and so on. In this paper, to improve the NAF conversion speed of the $NAF_w$ algorithm, we propose a new NAF conversion algorithm, called w-bit Shifting Non-Adjacent Form($SNAF_w$), where w is width of scanning window. By skipping some unnecessary bit comparisons, the proposed algorithm improves the NAF conversion speed of the $NAF_w$ algorithm. To verify the excellence of the $SNAF_w$ algorithm, the $NAF_w$ algorithm and the $SNAF_w$ algorithm are implemented in the 8-bit microprocessor ATmega128. By measuring CPU cycle counter for the NAF conversion under various input patterns, we show that the $SNAF_2$ algorithm not only increases the NAF conversion speed by 24% on average but also reduces deviation in the NAF conversion time for each input pattern by 36%, compared to the $NAF_2$ algorithm. In addition, we show that $SNAF_w$ algorithm is always faster than $NAF_w$ algorithm, regardless of the size of w.