• Journal of Biosystems Engineering
• /
• v.30 no.1 s.108
• /
• pp.45-55
• /
• 2005

Knowledge of the relationship between crop yield and yield-limiting factors is essential for precision farming. However, developing this knowledge is not easy because these yield-limiting factors are interrelated and affect crop yield in different ways. In this study, data for grain yield and yield-limiting factors, including crop chlorophyll content, soil chemical properties, and topography were collected for a small (0.3 ha) rice paddy field in Korea and a large (36 ha) upland corn field in the USA, and relationships were investigated with path analysis. Using this approach, the effects of limiting factors on crop yield could be separated into direct effects and indirect effects acting through other factors. Path analysis provided more insight into these complex relationships than did simple correlation or multiple linear regression analysis. Results of correlation analysis for the rice paddy field showed that EC, Ca, and $SiO_2$ had significant (P<0.1) correlations with rice yield, while pH, Ca, Mg, Na, $SiO_2,\;and\;P_2O_5$ had significant correlations with the SPAD chlorophyll reading. Path analysis provided additional information about the importance and contribution paths of soil variables to rice yield and growth. Ca had the highest direct effect (0.52) and indirect effect via Mg (-0.37) on rice yield. The indirect effect of Mg through Ca (0.51) was higher than the direct effect (-0.38). Path analysis also enabled more appropriate selection of important factors limiting crop yield by considering cause-and-effect relationships among predictor and response variables. For example, although pH showed a positive correlation (r=0.35) with SPAD readings, the correlation was mainly due to the indirect positive effects acting through Mg and $SiO_2$, while pH not only showed negative direct effects, but also negatively impacted indirect effects of other variables on SPAD readings. For the large upland Missouri corn field, two topographic factors, elevation and slope, had significant (P<0.1) direct effects on yield and highly significant (P<0.01) correlations with other limiting factors. Based on the correlation analysis alone, P and K were determined to be nutrients that would increase corn yield for this field. With the help of path analysis, however, increases in Mg could also be expected to increase corn yield in this case. In general, path analysis results were consistent with published optimum ranges of nutrients for rice and com production. We conclude that path analysis can be a useful tool to investigate interrelationships between crop yield and yield limiting factors on a site-specific basis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.383-392
• /
• 2000

Currently, multiprocessors are evaluated almost exclusively with scientific applications. Commercial applications are rarely explored because it is difficult to obtain the source codes of commercial DBMS. Even when the source code is available, such as for POSTGRES, understanding the source code enough to perform detailed meaningful performance evaluations is a daunting task for computer architects.To evaluate multiprocessors with commercial applications, we have developed our own DBMS, called EZDB. EZDB is a parallelized DBMS, loosely inspired from POSTGRES, and running on top of a software architecture simulator. It is capable of executing parallel programs written in SQL. Contrary to POSTGRES, EZDB is not intended as a prototype for a production-quality DBMS. Its purpose is to easily run and evaluate the performance of commercial applications on multiprocessor architectures. To illustrate the usefulness of EZDB, we showed the cache performance data collected for the TPC-B benchmark on a shared-memory multiprocessor. The simulation results showed that the data structures exhibited unique sharing characteristics and that their locality properties and working sets were very different from those in scientific applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.127-133
• /
• 2013

As an essential part of current industrial society, electric power energy is contantaly increasing in pace with the development of science and technology. In order to meet the demand of electric power, power facilities which take care of the higher voltage and bigger capacity is required. To produce and supply electric power on a sound basis the electric facilities should operate with reliability. To prevent disasters in advance, the high quality facilities should be manufactured, and a constant management should be done. When the power facilities cause accidents, the result is huge national deficits. Since the power facilities play a pivotal role in the key industry of national infrastructures of they should operate for a long time in maintaining a stable state, and the accidents can be prevented in advance. The lifetime of a power cable is considered to be 30 years at the time of manufacture, but in real fields, accidents of cable occur 8-12 years from the start of operation, resulting in a heavy loss of properties. In this paper, we will show that we have found out the cause and process of the deterioration of 22kV cable systems in operation. The result is that the process of deterioration does not follow the Weibull distribution only ; but rather, after the heat deterioration the Weibull distributed deterioration comes, then the cable is destroyed due to the partial discharge resulting from the Weibull distributed deterioration.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.8-17
• /
• 2011

Recently, fusion camera systems that consist of depth sensors and color cameras have been widely developed with the advent of a new type of sensor, time-of-flight (TOF) depth sensor. The physical limitation of depth sensors usually generates low resolution images compared to corresponding color images. Therefore, the pre-processing module, such as camera calibration, three dimensional warping, and hole filling, is necessary to generate the high resolution depth map that is placed in the image plane of the color image. However, the result of the pre-processing step is usually inaccurate due to errors from the camera calibration and the depth measurement. Therefore, in this paper, we present a depth map upsampling method robust these errors. First, the confidence of the measured depth value is estimated by the interrelation between the color image and the pre-upsampled depth map. Then, the detailed depth map can be generated by the modified kernel regression method which exclude depth values having low confidence. Our proposed algorithm guarantees the high quality result in the presence of the camera calibration errors. Experimental comparison with other data fusion techniques shows the superiority of our proposed method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.619-628
• /
• 2000

Abstract Perspective views provide a powerful depth cue and thus aid the interpretation of complicated images. The main drawback of current perspective volume rendering is the long execution time. In this paper, we present an efficient perspective volume rendering algorithm based on coherency between rays. Two sets of templates are built for the rays cast from horizontal and vertical scanlines in the intermediate image which is parallel to one of volume faces. Each sample along a ray is calculated by interpolating neighboring voxels with the pre-computed weights in the templates. We also solve the problem of uneven sampling rate due to perspective ray divergence by building more templates for the regions far away from a viewpoint. Since our algorithm operates in object-order, it can avoid redundant access to each voxel and exploit spatial data coherency by using run-length encoded volume. Experimental results show that the use of templates and the object-order processing with run-length encoded volume provide speedups, compared to the other approaches. Additionally, the image quality of our algorithm improves by solving uneven sampling rate due to perspective ray di vergence.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.30-39
• /
• 2006

Iris recognition is that identifies a user based on the unique iris texture patterns which has the functionalities of dilating or contracting pupil region. Iris recognition systems extract the iris pattern in iris image captured by iris recognition camera. Therefore performance of iris recognition is affected by the quality of iris image which includes iris pattern. If iris image is blurred, iris pattern is transformed. It causes FRR(False Rejection Error) to be increased. Optical defocusing is the main factor to make blurred iris images. In conventional iris recognition camera, they use two kinds of focusing methods such as lilted and auto-focusing method. In case of fixed focusing method, the users should repeatedly align their eyes in DOF(Depth of Field), while the iris recognition system acquires good focused is image. Therefore it can give much inconvenience to the users. In case of auto-focusing method, the iris recognition camera moves focus lens with auto-focusing algorithm for capturing the best focused image. However, that needs additional H/W equipment such as distance measuring sensor between users and camera lens, and motor to move focus lens. Therefore the size and cost of iris recognition camera are increased and this kind of camera cannot be used for small sized mobile device. To overcome those problems, we propose method to increase DOF by iris image restoration algorithm based on focus value of iris image. When we tested our proposed algorithm with BM-ET100 made by Panasonic, we could increase operation range from 48-53cm to 46-56cm.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.211-216
• /
• 2006

$\underline{Purpose}$: An analysis of the infrastructure for radiotherapy in Korea was performed to establish a baseline plan in 2006 for future development. $\underline{Materials\;and\;Methods}$: The data were obtained from 61 radiotherapy centers. The survey covered the number of radiotherapy centers, major equipment and personnel. Centers were classified into technical level groups according to the IAEA criteria. $\underline{Results}$: 28,789 new patients were treated with radiation therapy in 2004. There were 104 megavoltage devices in 61 institutions, which included 96 linear accelerators, two Cobalt 60 units, three Tomotherapy units, two Cyberknife units and one proton accelerator in 2006. Thirty-five high dose rate remote after-loading systems and 20 CT-simulators were surveyed. Personnel included 132 radiation oncologists, 50 radiation oncology residents, 64 medical physicists, 130 nurses and 369 radiation therapy technologists. All of the facilities employed treatment-planning computers and simulators, among these thirty-two percent (20 facilities) used a CT-simulator. Sixty-six percent (40 facilities) used a PET/CT scanner, and 35% (22 facilities) had the capacity to implement intensity modulated radiation therapy. Twenty-five facilities (41%) were included in technical level 3 group (having one of intensity modulated radiotherapy, stereotactic radiotherapy or intra-operative radiotherapy system). $\underline{Conclusion}$: Radiation oncology in Korea evolved greatly in both quality and quantity recently and demand for radiotherapy in Korea is increasing steadily. The information in this analysis represents important data to develop the future planning of equipment and human resources.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.1
• /
• pp.29-38
• /
• 2005

The fluid animation procedure consists of physical simulation and visual rendering. In the physical simulation of fluids, the most frequently used practices are the numerical simulation of fluid particles using particle dynamics equations and the continuum analysis of flow via Wavier-Stokes equation. Particle dynamics method is fast in calculation, but the resulting fluid motion is conditionally unrealistic The method using Wavier-Stokes equation, on the contrary, yields lifelike fluid motion when properly conditioned, yet the complexity of calculation restrains this method from being used in real-time applications. Global illumination is generally successful in producing premium-Duality rendered images, but is also excessively slow for real-time applications. In this paper, we propose a rapid fluid animation method incorporating enhanced particle dynamics simulation method and pre-integrated volume rendering technique. The particle dynamics simulation of fluid flow was conducted in real-time using Lennard-Jones model, and the computation efficiency was enhanced such that a small number of particles can represent a significant volume. For real-time rendering, pre-integrated volume rendering method was used so that fewer slices than ever can construct seamless inter-laminar shades. The proposed method could successfully simulate and render the fluid motion in real time at an acceptable speed and visual quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.164-169
• /
• 2019

Defense R&D investment is expanding. This shows that major countries are preparing for future warfare by securing high-tech technologies and developing new concept weapons systems. In particular, it is expected to accelerate the development of the technology of the 4th Industrial Revolution in the future, and Korea needs its own ability to develop advanced weapons and medium- and long-term investment strategies to prepare for future warfare. The defense science and technology strategy will be established every five years. The strategy-dependent R&D drive has limitations in replacing the rapidly changing security environment and changes in science and technology. This study proposes an investment efficiency process to proactive incorporate information into R&D strategies with a focus on implementing policies and changing security threats, while maintaining continuity in which strategic and focused areas are linked to core technology development. The process can quickly reflect the needs of technological change, the security environment and defense policy. The process can be used to efficiently allocate defense R&D budgets and establish strategic investment directions.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.33-66
• /
• 2003

This is a comparative and analytical study which comprises of the analysis of the rules of the buyer's remedies where the seller delivers defective goods of four legal systems; Directive, CISG, English law and Korean law. In light of threefold main purposes of this study, it firstly attempts to describe and analyze the remedy provisions of Directive in a comparative way in order to provide legal advice to the sellers who plans to enter into English consumer markets. It shows that the two tier remedial system under Directive is not much different from the other jurisdictions, except where the right of rescission under Directive is absolute in a sense that it does not require a certain degree of seriousness of defect. Secondly, the study compares the rules of one jurisdiction with those of other jurisdictions and evaluates the rules in light of the discipline of comparative law the basic question of which is whether a solution from one jurisdiction may facilitate the systematic development and reform of another jurisdiction. It proves the followings; (1) the reluctance and uncertainty in English law of ordering specific performance based on the discretionary power does not reflect the parties' preference because the order is either uncertain or rather negative where the purchase of substitute goods elsewhere is not a satisfactory solution in many cases; (2) the position in Korean law which has no limitation on the right to require substitute goods is likely unfair in commercial sales, but justified in consumer sales; (3) the right of termination or reduction under Directive which is subject to the applicability of the right to require repair or substitute goods seems to be contrary to the consumer's preference where the defective delivery destroys the basis of trust in the quality of the seller's performance; (4) the absolute right of termination under Directive and English law seems crucial in consumer sales because they are often inferior to commercial sellers in terms of information and bargaining power; (5) the right of reduction as a self-help remedy which is absent in English law emphasizes its usefulness. Thirdly, it finds that, where CISG is deemed to fail to unify different rules on the right to require specific performance between Civil and Common law, it is attempted once again in Directive and notwithstanding their hostility to awarding the right to require specific performance in English law, Regulations 2002 expressively stipulates such right.