• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.230-235
• /
• 1997

During laser welding, a laser induced matal vapour and plasuma is formed. The plasma shows strong fluctuation combined with acoustic sound emission. On-line monitoring of the process is possible by measuring and analysing the plasma and acoustic sound emission. This paper introduce the method of on line process monitoring in the laser beam welding and analysis being monitoring signal. The results show the complementary information on the process.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.40-52
• /
• 1998

Among the non-traditional machining methods, Abrasive waterjet machining process shows big promise in drilling difficult-to-machine materials due to its numerous advantages such as absence of heat affect zone and thermal distortion. Acoustic emission signal technique is used to understand about material removal mechanisms during abrasive waterjet drilling process. More information about the drilling process is derived through frequency decomposition of auto regressive moving average modeling representing acoustic emission signals.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2851-2854
• /
• 2003

The purpose of this paper was to find out the stabilized and effective value of RC-parameter by using PSpice simulation, considering that gate signal voltage can be distorted by RC-delay of signal line. the results of this study were as follows: TFT-LCD with high quality resolution increased the number of gate signal line and this made TFT on-time shorter over-width of signal line to improve the performance of TFT made the electrostatic capacity increase and the time constant higher, making problems and errors. and owing to the decrease of the aperture ratio, an electro optic character of LCD, we must consider the capacity and the condition of production process in deciding the width and the thickness of the gate signal line.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.107-113
• /
• 1997

In this paper, an interfacing method to control rehabilitation assitance system with bio-signal is proposed. Controlling with EMG signals method has certain advantage on signal-collecting, but has some drawbacks in the function resolution of EMG signals because data-processing process is not efficient. To improve function-resolution and to increase the efficiency of EMG signal interfacing with rehabilitation assistance system, Multi-layer Perception which is highly effective with static signal and hidden-Markov model for dynamic signal resolving are fused together. In proposed method. The direction and average speed of the rehabilitation assitance system are controlled by the trajectory control and estimation of the moving direction result from the fused model. From the experiment, proposed GMM and 2-level MLP hybrid-classifier yielded 8.6% perception-error rate, improving function resolution. New acceleration control method constructed with 3 nested linear filter produced continuous acceleration paths without the information of destination point. Thus, the mass output caused by non- continuous acceleration-deceleration was eliminated. In the simulation, the necessary calculation, in the case of multiplication, was reduced by 11.54%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.60-65
• /
• 1985

A method of weighting of a staggered pulse train is presented and an improvement per-formance of the signal-to-noise ratio for each case is compared. As the result of a computer simulation, the signal-to-noise ratio for weighting of a stagger-ed pulse train is a great improvement on the case of an uniform pulse train. The signal-to-noise ratio of optimum weighting is more improved than that of binomial weighting, it is known that the signal-to-noise ratio is improved as the increasing of the number of delay line cancellers, and it is shown that the signal-to-noise ratio is improved by weighting of the MTI output pulses before the integration process.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1109-1110
• /
• 2008

It is required to optimize the system operation efficiency to allocate maintenance task and period using systemic maintenance process. To allocate maintenance task and period must analysis the failure distribution mode at first. In this paper, we introduce the linear regression analysis and estimate the failure distribution for the railroad signal equipment using that.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.868-871
• /
• 2002

Nowadays, zerotrees based digital watermarking techniques are considered to be an efficient watermarking technique used for multimedia data in a compressed form. This paper presents a technique for watermarking an image, by employing zerotrees derived from the wavelet packet coefficients of the transformed image to carry the watermark signal. By setting a proper threshold in zerotrees determining process, the watermark signal can be recovered without the need of original image. With our proposed technique, more amount of watermark signal can be embedded within the image, compared to ordinary wavelet transform based techniques. The experimental results show the improved performance in both qualities of the resultant watermarked image and robustness of the embedded watermark signal against common signal processing such as brightness/contrast enhancement, high-pass filtering, Gaussian noise adding and JPEG compression scheme

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.335-336
• /
• 2007

The blanking interface between an ES system and a radar system on the same platform cause the unwanted radar signal separation in the process of the signal measurement of the ES system. In this paper, we propose the novel radar signal blanking method for ES. The proposed method extracts a standard of judgement which we can decide whether a radar signal is separated by the blanking interface and presents how to merge the separated signals. Test result is presented to show the performance of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.819-830
• /
• 1999

NAVTEX system is an international automated direct-printing service, broadcast on 5181kHz and 490kHz, for the promulgation of navigational and meteorological warnings and urgent information to ships. With our government's adoption of the international convention for SAR(Search and Rescue) in 1993, various trials for the installation of NAVTEX system have been executed by the government committee, relating laboratory and experts. An important consideration of the installation for NAVTEX system is the availability that could broadcast messages written in korean letter. Also, the receiver which can process the signal demodulated from the two frequencies, 518kHz and 490kHz, should be developed and supplied in domestic. In this paper, the code table and algorithm for conversions between NAVTEX characters and Korean Letters are studied, and signal processing techniques of code conversion are developed. Circuit design and implementation of the NAVTEX simulator using the Direct Digital Synthesizer are discussed, code conversion algorithm and signal processing technique of the NAVTEX transmission are programmed in its circuits. For evaluating the its functional characteristics, receiving module which has I-Q channel structure is designed. From the measurements of simulator, the characteristics show the frequency stability of the $(\pm)2Hz$ and Spurious free dynamic range is -63dBc. And the simulator can generate simultaneously wanted signal and several interfere signals. So, its capability is valuable for designers of the transmitting system and NAVTEX receiver, for provider as testing facilities of the type approval.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.885-890
• /
• 2020

In the distance measurement system the time-to-digital conversion circuit used measures the distance using the time interval between the start signal and the stop signal. The time interval is generally converted to digital information using a counter circuit considering the response speed. Therefore, a clock signal with a high frequency is required to improve precision, and a clock signal with a high frequency is also required to measure fine distances. In this paper, a counter circuit was designed to increase the accuracy of distance measurement while using the same frequency. The circuit design was performed using a 0.18㎛ CMOS process technology, and the operation of the designed circuit was confirmed through HSPICE simulation. As a result of the simulation, it is possible to obtain an improvement of four times the precision compared to the case of using a general counter circuit.