• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.77-80
• /
• 2002

In this paper, We have studied for guaranteeing the clear display of MPEG-2 video sequence when conduct splicing of MPEG-2 system streams. we focus on the PES domain splicing considering video sequence. And we wish to make a base on the TS or PS domain splicing considering video sequence. For that, first, we compared and analyzed problems that is raised when different two PES streams are spliced and effects that affect the video sequence. And based on this analysis, we have searched for methods that resolve the cause of problems that can be happened in the display of video sequence directly in PES domain.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.57-61
• /
• 2010

The wavelet transform was adopted as the transform for JPEG2000. However, wavelet has weakness about smoothness along the contours and limited directional information. So we use to other transform, called contourlet transform in compression. Objective quality assessment methods currently used Peak signal to noise Ratio(PSNR). But that is not very well matched to perceived visual quality. So new image quality assessment is required. In this paper, we propose a new method for image compression based on the contourlet transform, which has been recently introduced. In addition we evaluated compression image quality using PSNR and SSIM. Finally contourlet transform has a good result about images with smooth contours and SSIM is good method for image evaluation compared to PSNR.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.3
• /
• pp.65-69
• /
• 2010

The stereoscopic vision system is the algorithm to obtain the depth of target object of stereo vision image. This paper presents an efficient disparity matching method using nagao filter, octree color quantization and dynamic programming algorithm. we describe methods for performing color quantization on full color RGB images, using an octree data structure. This method has the advantage of saving a lot of data. We propose a preprocessing stereo matching method based on Nagao-filter algorithm using color information. using the nagao filter, we could obtain effective depth map and using the octree color quantization, we could reduce the time of computation.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.39-44
• /
• 2021

Since the recent Corona 19, the importance of cloud computing is increasing, and at the same time, competition among clouds is intensifying. Cloud companies are competing for survival by promoting various management innovation methods for continuous growth and development amid a rapidly changing business environment. They are also increasingly interested in performance management in their operations and growth. In this paper, we propose Cloud BSC, an IT BSC-based performance measurement model for cloud enterprise performance management. The validity of the proposed model is verified through statistical analysis and causal analysis. Eventually, the proposed model is expected to be utilized as a management evaluation tool that can provide useful performance analysis information to cloud companies.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.124-128
• /
• 2023

Semiconductor engineers have long sought to enhance the energy efficiency of mobile semiconductors by reducing their voltage. During the final stages of the semiconductor manufacturing process, the screening and evaluation of voltage is crucial. However, determining the optimal test start voltage presents a significant challenge as it can increase testing time. In the semiconductor manufacturing process, a wealth of test element group information is collected. If this information can be controlled to predict the test voltage, it could lead to a reduction in testing time and increase the probability of identifying the optimal voltage. To achieve this, this paper is exploring machine learning techniques, such as linear regression and ensemble models, that can leverage large amounts of information for voltage prediction. The outcomes of these machine learning methods not only demonstrate high consistency but can also be used for feature engineering to enhance accuracy in future processes.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.811-823
• /
• 2011

This paper proposes an efficient transmission method for the panoramic multimedia contents. The panoramic video provides wide sight and various view-point to the user. The traditional methods of the panoramic multimedia content transmission has several limitations, as follow; A client suffers a long initial delay time to play a panoramic video when it is transmitted through a limited bandwidth network, because the panoramic video has larger data size than a general video. And if a client's display device has limited resolution, such as mobile phone, laptop PC monitor, etc. it can not display the entire panoramic video that has a wide view video sequence. So, in order to overcome the obstacles, this paper proposes an efficient transmission of panoramic multimedia contents. This method will increase the transmission efficiency throughout the technique of the scene description in MPEG-4 system. Also we demonstrated the efficiency of the proposed method by comparison with existing methods.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2018

The augmented reality(AR) technology enables to acquire various image information at the same time by combining virtual image information with the user's viewpoint. These AR technologies have been used to visualize patients' organs and tissues during surgery and diagnosis in the fields of Image-Guide Operation, Surgical Training, and Image Diagnosis by medical convergence, and provides the most effective surgical methods. In this paper, we study the technical features and application methods of each element technology for medical fusion of AR technology. In the AR technology for medical convergence, display, marker recognition and image synthesis interface technology is essential for efficient medical image. Such AR technology is considered to be a way to drastically improve current medical technology in the fields of image guide surgery, surgical education, and imaging diagnosis.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.205-212
• /
• 2019

Motion tracking and localization devices are an important building block of motion tracking systems in a virtual reality (VR) environment. This study is about improving the accuracy of motion and location for enhancing user immersion in experience type VR environment to position tracking technique. In this study, we propose and test a design of such a device. The module data test of the attitude and heading reference system shows that the implementation with the MPU-9250 sensor is successful and adequate to be used with short operation time. We consider various sensor hardware dependencies of VR, and compare various correction methods and filtering methods to lower the motion to photon (MTP) time that user movement is fully reflected on the display using sensor devices. The Kalman filter is used to combine the accelerometer with the gyroscope in the sensing unit.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.1
• /
• pp.25-44
• /
• 2017

This study was to suggest display of RDA resource type in OPAC efficiently. Literature reviews and users test and preference survey were used as research methods. The 4 ways for the display of RDA resource type were suggested. First, GMD and the resource type code(bcode2) invented by library itself as well as leader/06, 007, and 008 field should be used for converting AACR2 resource type to RDA resource type in the bibliographic records. Second, RDA resource type vocabularies applicable to Korean cataloging environment should be designed and described in 33X subfield ${\blacktriangledown}9$ and detailed resource terms described in 34X should be also expressed in OPAC. Third, two option is suggested as content type and carrier type display separately and as content type and carrier type combination. Fourth, 336, 338 filed, leader/07 bibliographic level, 008/30-31 Literary text for sound recordings, 34X field were useful to develop user centered resource type icon. This study would be able to increase the utilization of RDA resource types and help the users to understand the RDA resource type in OPAC.