• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.6-11
• /
• 2009

The electro-optical characteristics of the Liquid Crystal on Silicon (hereinafter "LCOS") micro-display on vertically alignment (VA) mode were studied with 3-dimensional LC code. 5 different cell gaps, such as 1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ and 2.8 ${\mu}m$, were selected. The reflectance-voltage (R-V) characteristics, distribution of reflected light, reflectance, optical fill factor and contrast ratio were calculated and investigated depending on various cell gaps. Due to the surface anchoring effect, higher cell gap showed higher reflectance. However, considering the optical fill factor and contrast ratio, middle-height 2.1 ${\mu}m$ showed the best electro-optical characteristic. 0.7 inch Full-HD LCOS panels having same geometry and material property were fabricated. The reflected light intensity and contrast ratio were measured and the measured results were well-matched to the calculated results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.1-5
• /
• 2009

A new pixel circuit for Active Matrix Organic Light Emitting Diodes (AMOLEDs), based on the polycrystalline silicon thin film transistors (Poly-Si TFTs), was proposed and verified by SMART SPICE simulation. One driving and six switching TFTs and one storage capacitor were used to improve display image uniformity without any additional control signal line. The proposed pixel circuit compensates an inevitable threshold voltage variation of Poly-Si TFTs and also compensates the degradation of OLED at low power supply voltage($V_{DD}$). The simulation results show that the proposed pixel circuit successfully compensates the variation of OLED driving current within 0.8% compared with 20% of the conventional pixel circuit.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.77-87
• /
• 2011

In this paper, we propose a disparity correction technique to reduce the inherent visual discomfort while watching stereoscopic videos. The visual discomfort must be solved for commercial 3D display systems to provide natural stereoscopic videos to human eyes. The proposed disparity correction technique consists of horizontal and vertical disparity corrections. The horizontal disparity correction is implemented by controlling the depth budget of stereoscopic video using the geometric relations of a stereoscopic camera system. In addition, the vertical disparity correction is implemented by using a feature-based stereo matching algorithm. Conventional vertical disparity corrections have been done by only using camera calibration parameters, which still cause systematic errors in vertical disparities. In this paper, we minimize the vertical disparity as small as possible by using a feature-based correction algorithm. Through the comparisons of conventional feature-based correction algorithms, we analyze the performance of the proposed technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.8-12
• /
• 2008

For the reduction of fabrication cost and process time of AC plasma display panel (PDP), indium tin oxide (ITO) layer was patterned as bus electrode using Nd:$YVO_4$ laser. In comparison with the chemically wet etched ITO patterns, laser ablated ITO patterns showed the formation of shoulders and ripple-like structures at the edge of the ITO lines. For the reduction of shoulders and ripple-like structures, pulse repetition rate and scan velocity of laser was changed. In addition, we analyzed a discharge characteristic of PDP test panel to observe how the shoulders and ripple-like structures influence on the PDP. Based on experimental results, the pattern etched at the 500 mm/s and 40 kHz was better than any other condition. From this experiment we could see the possibility of the laser direct patterning for the application to the patterning of ITO in AC-PDP.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2015

Fashion and architecture essentially have structure to build space for a form of three dimensions. This study defines the form in which structure in itself becomes design as structural simplicity and investigates design paying attention to only structure. It is one of efforts in order to display new design required in the age of a flood of design and it is considered that before developing design through the fusion of architecture and fashion, understanding structure which is the most fundamental element to constitute the form of the two genres will be a groundwork to develop proper fusion design. This study elucidates similarities between architecture and fashion through literature review and investigates structure meant in architecture and fashion, and after that, collects corresponding examples through related literature and fashion information site. For structural simplicity in architecture, structure of a building in itself is a form and decoration at the same time, and it appears as a form of minimizing other elements and stressing the structure only. Structure in fashion means composition line which essentially exists to embody two dimensional materials onto three dimensional human body. As elements of geometric lines are creatively expressed by a designer in order to constitute three dimensional form from structural simplicity, they connote a variety of functions and exert decorative effects as well. And the shape of structure expressed like this is employed as a tool to show off the designer's techniques.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.77-85
• /
• 1996

Using a series of medical tomograms, we can reconstruct internal organs or other objects of interest and generate 3-D images. It is generally accepted that the axial resolution determined by two sequential image slices is lower than the planar resolution in one image slices. Therefore, various methods of interpolation were developed for an accurate display of reconstructed images. In this paper, a new algorithm for 3-D reconstruction of the medical images such as MRI and X-ray CT is suggested. The algorithm is shape-based and utilizes parts of the gray-level information. We extend the conventional shape-based interpolation of the binary images to the gray-scale images using the shortest distance map. Using this new algorithm, We could reduce the execution time for interpolation while keeping similar high quality of the reconstructed images with reduced execution time and is applicable to the various medical tomograms.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.31-36
• /
• 2010

After the launch of MPEG-2, it is widely used in multimedia applications like a Digital-TV or a DVD. Then, After the launch of H.264 at 2004, it has been expected to replace MPEG-2 and services IPTV and DMB. As we have been used to MPEG-2 devices by this time, we can not access H.264 Broadcast with MPEG-2 device. So We propose a new approach to transcode H.264 video into MPEG-2 form which can facilitate to display H.264 video with MPEG-2 device. To reduce the quality loss by transcoding, we use CPDT(Cascaded Pixel Domain Transcoder) structure. And to minimize processing time, SKIP block, INTRA block and motion vectors obtain from decoding process is employed for transcoding. we use BMA(Boundary Matching Algorithm) to select only one from candidate motion vectors. Experimental results show a considerable improved PSNR with reduction in processing time compared with existing methods.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.4 s.304
• /
• pp.1-10
• /
• 2005

Recently, most of PLC has been using widely in automation equipment that is needed for field of industry automation. HMI is essential system for effective Control of many numbers of PLC. Even though early HMI system was consists of simple analog devices, however, HMI system could control or supervise PLC through display screen since it embeds various digital parts by development of technology in these days. HMI system consists of three parts as HMI hardware, an operating program for HMI equipment and a HMI screen editor. Among these elements, a Program for editing screen of HMI should provide various screen elements that helps users to edit each screens displayed on HMI. In this study, we design and implement screen edit program by object-oriented method for small HMI equipment and propose Prototype of embedded HMI system.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.219-233
• /
• 2000

This paper is designed to suggest marketing strategies suitable for each classified group by subdividing high school students, the new-generation consumers, by clothes-shopping orientation at jean markets and by identifying the demographic characteristics and the purchasing behavior of each classified group. The subjects consist of 644 high school students. female and male, in Seoul, who responded to my questionnaire research. In terms of the clothes-shopping orientation, pleasure shopping orientation, brand-based shopping orientation, fashion-oriented one, convenience-oriented one and economic one are in sequence. In light of the consumer group based on the factors of clothes-shopping tendencies, the convenience-oriented group ranks first, which is followed by pleasure shopping group, brand-based shopping group and economic one. The subjects turn out to have purchased jeans at time of necessity, The subjects are most liable to get information from their friends, which is followed by their shopping experiences and display. And they turn out to be little affected by family members, salespersons and the press. They regarded aesthetic standards as one of the most important standards, which are followed by size, fitting, personality expression and prices in order. On the other hand, they think little of such factors as friends and similarity. In terms of the standards to make a selection of shops, the respondents cite the quality of goods, the prices of jeans, and service. They didn't think much of the importance of the persuasion of those around them, the convenience of mass transportation facilities, and the approving rate of brands and so on. They resort to wholesale markets, department stores and low-pricing shops in sequence. They turn out not to be satisfied with product guarantees, and fashion. They relied on aggressive approaches like exchanges and refund in case they were dissatisfied with jeans.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.539-542
• /
• 2003

A motor is the workhorse of our industry. The issues of preventive and condition-based maintenance, online monitoring, system fault detection, diagnosis, and prognosis are of increasing importance. Different internal motor faults (e.g., inter-turn short circuits, broken bearings, broken rotor bars) along with external motor faults (e.g., phase failure, mechanical overload, blocked rotor) are expected to happen sooner or later. This paper introduces the fault detection technique of induction motors based upon the stator current. The fault motors have rotor bar broken or rotor unbalance defect, respectively. The stator currents are measured by the current meters and stored by the time domain. The time domain is not suitable to represent the current signals, so the frequency domain is applied to display the signals. The Fourier Transformer is used for the conversion of the signal. After the conversion of the signals, the features of the signals have to be extracted by the signal processing methods like a wavelet analysis, a spectrum analysis, etc. The discovered features are entered to the pattern classification model such as a neural network model, a polynomial neural network, a fuzzy inference model, etc. This paper describes the fault detection results that use wavelet decomposition. The wavelet analysis is very useful method for the time and frequency domain each. Also it is powerful method to detect the features in the signals.