• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.129-131
• /
• 2000

A new analog synchronous mirror delay to be used in the wide-bandwidth clocking circuits is proposed to overcome the frequency dependency of the negative-delay values in the conventional analog synchronous mirror delay. The scheme adopts a new dummy-delay compensation technique by adopting the comparator with inherent systematic offset to achieve the enhanced negative-delay range especially prominent at high frequency applications.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.153-156
• /
• 2001

This paper discusses a stochastic stabilization of Takagi-Sugeno (75) fuzzy system with Markovian input delay. The finite Markovian process is adopted to model the input delay of the overall control system. It is assumed that the zero and hold devices are used for control input. The continuous-time 75 fuzzy system with the Markovian input delay is discretized for easy handling delay, accordingly, the discretized 75 fuzzy system is represented by a discrete-time 75 fuzzy system with jumping parameters. The stochastic stabilizibility of the jump 75 fuzzy system is derived and formulated in terms of linear matrix inequalities (LMls).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2157-2165
• /
• 2006

In implementing GCRA, well known as the representative user traffic policing algorithm for constant-bit rate service, it is essential to set proper values for delay variation tolerance in order to prevent network overload and excessive user data loss due to delay variation incurred inevitably during transmission process. In this paper, we investigate the performance of GCRA algorithm for various values of delay variation tolerance and suggest a guideline for setting proper delay variation tolerance values.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.498-507
• /
• 2001

For the Internet multicast routing, there are some protocols researched. This paper presents a new protocol called DPIM (Delay-bounded PIM) to support QoS of delay in multicast routing. This protocol is based on PIM-SM. When the specified delay bound is not satisfied by dynamic membership, the RP (Rendezvous Point) of shared tree is changed and the shared tree is reconstructed. Therefore, the QoS of delay is always supported in this protocol. Through performance analysis and comparison with other protocol, we certify that this protocol is pertinent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.533-541
• /
• 2001

In this paper, we proposed lowpass filter using all-pass sums of flat delay characteristics. this filter consisted of all-pass filter of parallel structure, the general analog filter is impossible to adjust the phase and the delay, using the Proposed filter, it has advantage to adjust them. And, we compared and analyzed this filter with passband width and magnitude characteristics, and the relation of group delay characteristics and cut-off frequency. Also, in order to obtain desired cut-off frequency, forming the weighing, we obtained desired cut-off frequency and group delay characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.548-552
• /
• 2005

In most physical processes, the transfer function includes a time-delay, and in the general distributed control system using a computer network, an inherent time-delay exists due to the spatial separation between controllers and actuators. Under the circumstance where an input time-delay exits, the system response overshoots and tends to diverge. For this reasons described above, a controller design method is proposed for a discrete nonlinear system including input time-delay, which adopts the time-discretization using Taylor series. Controllers are synthesized using an input/output linearization method. Finally, several cases of the computer simulations were conducted, and the results validate the proposed methods.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.274-279
• /
• 2007

We fabricated and characterized an optical delay line for optical coherence tomography (OCT). The delay line was composed of a cylindrical piezoelectric transduce (PZT) and a single mode optical fiber. The OCT system used a duplex scanning optical delay line which was symmetrically driven in the reference and sample arms. We showed that the sinusoidal-wave was superior to a triangular-wave for driving the optical delay line for scanning depth and repeatability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.394-397
• /
• 2003

Since the speed of operation in the system has been increasing rapidly, chips should have been synchronized. Then, synchronized circuits such as PLL (Phase Locked Loop), DLL (Delay Locked Loop) are used. VCO (Voltage Controled Oscillator) generated a frequency in the PLL has disadvantage such as jitter accumulation. On the other hands, VCDL (Voltage Controled Delay Line) used at DLL has an advantage which has no jitter accumulation. In this paper, a new and improved VCDL structure is suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2218-2230
• /
• 2012

In this paper, we propose an efficient channel delay estimation method for orthogonal frequency-division multiplexing (OFDM) systems, especially over doubly-selective fading channels which are selective in both the symbol time domain and subcarrier frequency domain. For the doubly-selective fading channels in single frequency network (SFN), long and strong echoes exist and thus the conventional discrete Fourier Transform (DFT) based channel delay estimation system often fails to produce the exact channel delay profile. Based on the analysis of the discrete-time frequency response of the channel impulse response (CIR) coefficients in the DFT-based channel delay estimation system, we develop a method to effectively extract the true CIR from the aliased signals by employing a simple narrow-band low-pass filter (NB-LPF). The performance of the proposed system is verified using the COST207 TU6 SFN channel model.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.11
• /
• pp.39-46
• /
• 2015

In this paper, we propose a performance-aware workload model for efficient implementation of control systems. When implementing a control algorithm as an embedded computer system, the control code executes periodically. For such systems, its control performance depends on not only the accuracy of the control algorithm itself but also temporal parameters such as control period and sensing to actuation delay. In this regard, this paper studies the relation between control period and delay by measuring and analyzing the control performance of LKAS (Lane Keeping Assist System) with varying period and delay combinations. Through this experimental study, this paper shows that the two timing parameters, i.e.,control period and delay, has a tradeoff relation in terms of control performance.