• 한국해양공학회지
• /
• 제17권5호
• /
• pp.82-87
• /
• 2003

A practical method to investigate the sharing architecture of FMS, for small and medium enterprises, on distributed heterogeneous environmental conditions is investigated. Because the industrial FMS model requires a reasonable size for actual work-site flexible operation, the initial facility expense is very heavy. The support for flexible cooperation of FMS, with some external different FMS, can reduce expenditures and provide greater functionality. While most FMS provide their operation process using an adequate mechanism, when used in isolation, such as island of automation, there is increasing demand for FMS that can cooperate. By exchanging intermediate products and information with other external FMS, products can be produced that cannot be produced alone, such as those that require various processes. This study first considers the sharing architecture of FMS for small and medium enterprises, and investigates the effects of the general sharing architecture of FMS on distributed heterogeneous environments, by using transducer approach to agentification. In this study, set-up station or in-out station takes charge of the gateway of intermediate products, and routes them among distributed heterogeneous FMS plants. The transducer approach is applied to web agent and set-up agent established interfaces, with system controller and setup controller. In this study, the FMS-established sharing architecture is able to obtain not only the internal flexibility, but also the external flexibility.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권10호
• /
• pp.351-356
• /
• 2014

최근 차량용 블랙박스는 무선 네트워크를 통해 블랙박스에 저장된 동영상을 휴대폰으로 전송하는 기능을 제공하여, 해당 동영상을 여러 용도로 활용할 수 있도록 지원한다. 본 논문에서는 블랙박스 촬영 동영상을 이용하여 교통법규 위반 신고를 자동화하는 방법에 대해 소개한다. 제안하는 방법에서는 교통법규 위반 사례가 포착되었을 때, 간단한 사용자 인터페이스 조작을 통해 촬영된 블랙박스 동영상을 휴대폰으로 전송시킨다. 해당 동영상은 촬영시간 및 위치 등의 관련정보와 함께 HTTP 요청의 형태로 생성되어, 신고센터에 자동으로 전송된다. 본 논문에서는 제안하는 방법을 구현한 프로토타입 시스템에 대해 소개하고, 실제 활용을 위해 필요한 부가적인 사항들에 대해 논의한다.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.25-38
• /
• 2019

This study is to develop a diagnostic model for the effective introduction of smart factories in the manufacturing industry, to diagnose SMEs that have difficulties in building their own smart factory compared to large enterprise, to identify the current level and to present directions for implementation. IT, AT, and OT experts diagnosed 18 SMEs using the "Smart Factory Capacity Diagnosis Tool" developed for smart factory level assessment of companies. They analyzed the results and assessed the level by smart factory diagnosis categories. Companies' smart factory diagnostic mean score is 322 out of 1000 points, between 1 level (check) and 2 level (monitoring). According to diagnosis category, Factory Field Basic, R&D, Production/Logistics/Quality Control, Supply Chain Management and Reference Information Standardization are high but Strategy, Facility Automation, Equipment Control, Data/Information System and Effect Analysis are low. There was little difference in smart factory level depending on whether IT system was built or not. Also, Companies with large sales amount were not necessarily advantageous to smart factories. This study will help SMEs who are interested in smart factory. In order to build smart factory, it is necessary to analyze the market trends, SW/ICT and establish a smart factory strategy suitable for the company considering the characteristics of industry and business environment.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.85-94
• /
• 2022

Recently, consumers who prefer contactless consumption are increasing due to pandemic trends such as Corona 19. This is the driving force for developing the last mile-based logistics ecosystem centered on the online e-commerce market. Lastmile led to the continued development of the logistics industry, but increased the amount of cargo in urban area, and caused social problems such as overcrowding of logistics. The courier service in the logistics base area utilizes the process of visiting the delivery site directly because the courier must precede the loading work of the cargo in the truck for the delivery of the ordered product. Currently, it's carried out as automated logistics equipment such as conveyor belt in unloading or classification stage, but the automation system isn't applied, so the work efficiency is decreasing and the intensity of the courier worker's labor is increased. In particular, small-scale courier workers belonging to the sub-terminal unload at night at underdeveloped facilities outside the city center. Therefore, the productivity of the work is lowered and the risk of safety accidents is exposed, so robot-based loading technology is needed. In this paper, we have derived the top-level concept and requirements of robot-based loading system to increase the flexibility of logistics processing and to ensure the safety of courier drivers. We defined algorithms and motion concepts to increase the cargo loading efficiency of logistics sub-terminals through the requirements of end effector technology, which is important among concepts. Finally, the control technique was proposed to determine and position the load for design input development of the automatic conveyor system.

• 한국ITS학회 논문지
• /
• 제16권5호
• /
• pp.109-120
• /
• 2017

자동차 운전면허 시험에서 객관적인 평가가 중요하다. 특히 도로 주행시험은 실제 도로에서 운전능력, 규칙준수, 상황판단능력 등을 종합적으로 시험하는 것이다. 이를 위하여 본 논문에서는 GPS와 센서 데이터 및 기기조작 정보를 활용하여 운전면허 시험의 자동채점시스템을 제안한다. 자동채점 시스템은 차량탑재장치, 채점용단말, 데이터 제어장치, 데이터 저장 및 처리를 위한 서버로 구성되어 있다. 차량탑재장치는 차량에 설치된 센서 데이터를 수집한다. 채점 단말은 차량탑재장치로부터 받은 데이터를 활용하여 기준에 따라 자동채점 한다. 또한 이동 중에 GPS 오차로 인하여 차량이 도로를 벗어나 표현되므로 지도매칭 기법과 경로이탈 및 복귀 알고리즘을 적용하였다. 이 시스템은 기존 시험 채점 방식과 달리 자동 채점이 가능하며, 시험 결과에서 정확한 차량위치 표시와 GPS 음영지역을 벗어났을 때 10초 이내로 경로 복귀를 하였다. 이 시스템은 도로 주행 교육에도 활용될 수 있을 것으로 기대된다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.49-55
• /
• 2002

A decrease in the birthrate and aging are progressing in Japan and several countries. In that society, it is important that physically weak persons such as elderly persons are able to take care of themselves. We have been developing exoskeletal robots for human (especially for physically weak persons) motion support. In this study, the controller controls the angular position and impedance of the exoskeltal robot system using multiple fuzzy-neuro controllers based on biological signals that reflect the human subject's intention. Skin surface electromyogram (EMG) signals and the generated wrist force by the human subject during the elbow motion have been used as input information of the controller. Since the activation level of working muscles tends to vary in accordance with the flexion angle of elbow, multiple fuzzy-neuro controllers are applied in the proposed method. The multiple fuzzy-neuro controllers are moderately switched in accordance with the elbow flexion angle. Because of the adaptation ability of the fuzzy-neuro controllers, the exoskeletal robot is flexible enough to deal with biological signal such as EMG. The experimental results show the effectiveness of the proposed controller.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권6호
• /
• pp.287-298
• /
• 2000

The UCA is a standard-based approach to utility communications which provides for wide scale integration of functional areas including customer interface, distribution, transmission, power plant, control center, and corporate information systems. Field devices in the power facilities require real-time communications, and they must be interconnected into fieldbus. This study introduces a method of implementing gateway that interfaces UCA and fieldbus. In this study, PROFIBUS and FOUNDATION Fieldbus are selected as candidate fieldbus protocols. Protocol interface in the gateway can be accomplished by mapping objects and services of UCA and fieldbus. MOst of the UCAs CASM objects and services are directly mapped into those of the application and user layers of fieldbus. However, some CASM services are not supported in the application and user layers of fieldbus. This study presents the method of implementing those services. In order to show that the implementation of interface is possible, this study presents pseudo-codes of interface program that maps the objects and services of UCA and fieldbus.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.185-190
• /
• 2015

사물인터넷의 국내외 주요 서비스 사례를 통하여 알 수 있듯이 종래 재난, 재해 등 공공 분야와 공장 자동화 등 기업 중심의 사례가 이제는 개인에 직접적으로 영향을 미치는 B2C(Business to Consumer) 서비스가 확산되고 있다. 본 논문에서는 현재 시점에서 사물인터넷(IoT) 기반 원격 제어 및 모니터링이 가능한 탐사로봇 설계를 위한 플랫폼과 부품, 그리고 네트워크 구성 방안에 대하여 제시하였다.

• 대한안전경영과학회지
• /
• 제22권1호
• /
• pp.9-14
• /
• 2020

Artificial intelligence (AI) has been applied to most industries by enhancing automation and contributing greatly to efficient processes and high-quality production. This research analyzes the applications of AI-based automobile accident prevention systems. It deals with AI-based collision prevention systems that learn information from various sensors attached to cars and AI-based accident detection systems that automatically report accidents to the control center in the event of a collision. Based on the literature review, technological and institutional changes are taking place at the national levels, which recognize the effectiveness of the systems. In addition, start-ups at home and abroad as well as major car manufacturers are in the process of commercializing auto parts equipped with AI-based collision prevention technology.