• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.629-636
• /
• 2022

Domestic eco-friendly vehicles currently account for 5.8% of the total registered vehicles in Korea. Hydrogen vehicles, one of the representative eco-friendly vehicles, have grown rapidly as they have been expanded to the market based on the government's policy to boost the hydrogen industry. Therefore, it is time to expand the safety review of hydrogen vehicles in various directions according to the increase in supply. In this study, the effect of internal heat damage was analyzed when a jet flame was generated by a hydrogen car in a road tunnel. It was simulated using Fluent, and the amount of jet flame injection was selected in consideration of the hydrogen tank capacity of commercial hydrogen vehicles for road tunnels. In addition, the study was conducted with the direction of the jet flame and the nozzle distance from the tunnel wall as variables. From the results, when the jet flame erupted in the road tunnel, high radiant heat emission of more than 20 kW/m² was generated in most areas within ±5 m in the longitudinal direction based on the vehicle (spray nozzle) and 5 to 7 m in the lateral direction based on the adjacent tunnel wall.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.495-512
• /
• 2022

Due to the concentration of population in the city center, the aboveground structures are saturated, and the development of underground structures becomes important. In addition, it is necessary to apply the reinforcement construction method for the pillar part of the adjacent tunnel that can secure stability, economy, and workability to the site. In this study, the tunnel pillar reinforcement method using prestress and grouting was reviewed. There are various reinforcement methods that can compensate for the problems of the side tunnel, but as the tunnel pillar construction method using prestress and grouting is judged to be excellent in field applicability, stability, and economic feasibility, it is necessary to review the theoretical and numerical analysis of the actual behavior mechanism. Therefore, a scaled-down model experiment was conducted. The reduced model experiment was divided into PC stranded wire + steel pipe reinforcement grouting + prestress (Case 1), PC strand + steel pipe reinforcement grouting (Case 2), and no reinforcement (Case 3), and the displacement of the pillar and the earth pressure applied to the wall were measured. Through experiments, it was confirmed that the PC stranded wire + steel pipe reinforcement grouting + prestress method is the most excellent reinforcement method among various construction methods. It was judged that it could be derived.

• Journal of Nutrition and Health
• /
• v.52 no.4
• /
• pp.354-368
• /
• 2019

Purpose: This study evaluated the glycemic response of diets using estimated glycemic load (eGL), which had been developed for mixed meals for Korean adults, and examined its associations with cardiometabolic risk factors among Korean adults. Methods: A total of 4,655 men and 6,760 women aged 19 years and above were included from the 2013 ~ 2016 Korea National Health and Nutrition Examination Survey. eGL was calculated by each meal (breakfast, lunch, dinner, and snack) and then summed to give daily total eGL. A multiple logistic regression analysis was used to examine the association. Results: Mean daily total eGL was 112.6 in men and 99.3 in women. Daily total eGL was positively associated with carbohydrate and fiber intakes, but negatively associated with protein and fat intakes in both men and women (p < 0.05 for all). Daily total eGL showed an inverse association with HDL-cholesterol level in both men and women (p = 0.0036 for men and p = 0.0008 for women). Men in the highest quintile of daily total eGL showed a 66% increased risk of hypercholesterolemia (OR, 1.66; 95% CI, 1.10 ~ 2.50; p for trend = 0.0447) compared with those in the lowest quintile. Conclusion: These findings suggest that eGL based on carbohydrate, protein, fat and fiber intakes can reflect glycemic response and therefore can be used as an index for dietary planning, nutrition education and in the food industry.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.93-108
• /
• 2019

This study analyzed the influence of experiential marketing factors of 3D printing and Internet services on technology acceptance factors and usage intention. Furthermore, we analyzed how the user's innovativeness shows the effect on the intention to use. Data acquired from a total of 518 college students was used for the final analysis, which was perfromed by SPSS 21.0 and AMOS 23.0 programs. The results of this study are as follows. We analyzed the influence of the experiential marketing factors of fashion service utilizing the 3D printing and the Internet of Things on the acceptance of technology and intention to use these technologies. As for 3D printing, first, sensory and behavioral factors are positively related to the acceptance of technology. Second, emotional and cognitive factors have negative effects on all technology acceptance. Third, relational factors did not show a significant influence on several conditions of technology acceptance. Fourth, the effects of technology acceptance on the willingness to use have a positive effect on several conditions factors, except the effort expectation. As for the result concerning the Internet of Things first, behavioral factors have a positive effect on all technology acceptance. Second, emotional factors have a negative effect on all technology acceptance. Third, cognitive factors did not have a significant effect on various conditions and showed negative effects on several factors. Fourth, sensory and relational factors did not affect the acceptance of technology. Fifth, the effects of technology acceptance on the intention to use are affected by several conditions, except for effort expectation. As a result of analyzing the moderating effects of user's innovativeness on the willingness to use, 3D printing did not show any significant effect on innovation. However, the Internet of Things has a significant influence on the user acceptance of technology acceptance.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.535-549
• /
• 2019

The purpose of this study was to examine what kind of images were presented on movie stars in the newspaper. For the purpose, we classified the time period according to the movie industry and media trend, selected representative stars by period, and collected 798 related articles reported in newspapers. As a result of analyzing the reporting trend, domestic and foreign topics, news format, and gender difference in collected movie star articles, it was found that the image of movie stars reproduced in newspaper articles had mostly neutral images that do not represent specific gender. Since the 2000s, news coverage was changed to reproduce various images rather than being fixed to particular images, and the subject of report became more diversified through comparison of domestic and foreign topics. In addition, articles in the form of book review decreased and the interview-type articles increased in number, and in the case of male movie stars, the proportion of articles based on works was high in comparison to female movie stars. This study has significance in that it explored the changes in the process of reproducing star images diachronically from the initial stage of stars to the modern times. And it is hoped that this study will serve as basic data for the follow-up studies on the process of reproducing various images in the multi-media era.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.265-277
• /
• 2019

The objective of this study was to develop and verify an effective vortex typed nonfilter nonpoint source pollution reduction device. To verify this pollution reduction device, a total of twelves scenarios (three rainfall intensities${\times}$two states${\times}$two steps) of experiments were conducted using pollutants. First, simulated inflow (rainfall intensity 2.5 mm/hr: $0.00152m^3/s$, rainfall intensity 3.395 mm/hr: $0.00206m^3/s$, rainfall intensity 6.870 mm/hr: $0.00326m^3/s$) was calculated. Second, pollutants (mixture of 25% of four particle sizes) were selected and injected. Third, pollutant removal efficiencies of this device at its initial state and operating states were measured. As a result of analysis based on rainfall intensity, the concentration of pollutants was decreased by the device at initial and operating states at all rainfall intensities. Its pollutant removal efficiency was more than 80%, the standard set by the Ministry of Environment. Its pollutant removal efficiency was gradually increased over time, reaching approximately 90%. Its pollutant removal efficiency was higher in its operating state than that in its initial state. Therefore, nonpoint source pollutants can be effectively removed by this vortex typed nonpoint source pollution reduction device developed in this study.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.37-45
• /
• 2021

This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.228-236
• /
• 2021

This research investigates the causes of infringements related to authors' moral rights which has most conflict among moral rights of authorship, through analysis of judicial precedents and compare whether there subsists any differences in viewpoints between judicial precedent trend and those on behind the scene of broadcast production. Copyright is divided into intellectual property and moral rights of authorship. Right to the integrity of the work is part of moral rights of authorship and produce one content and used in various media. When the edit is needed to fit the organization and advertisement time, advanced consultation from the rightful owner or written consent is needed. However, under the time pressure or ignorance of copyright, the arbitrary edits are made and content is used. This infringes the right of the integrity of the work. When we produce and use cinematographic works and other audiovisual works, there are considerable variablilies stemming from authorship, production cost and program staff. Therefore, prior conscent is needed to acquire and use the copyright in a proper manner. However, due to production-oriented environment and low understanding of the copyright protection, we usually depend on the users' work practices rhather than insufficiency of copyright laws in dealing with the infringement of right to the industry. In conclusion, we need to provide meticulous work manual and to focus on systematic eduction of professional copyright manpower.

• Journal of The Korean Association of Information Education
• /
• v.24 no.5
• /
• pp.423-431
• /
• 2020

As artificial intelligence(AI) technology is advanced based on recent technological advances such as machine learning, big data, and machine learning, it is actively used in various fields and is emerging as the core of the future industry. Accordingly, Korea is laying the groundwork for future AI technology development and environment establishment, such as announcing the national AI strategy, and is developing various policies to foster AI talent in the field of education. However, although many people agree on the importance or necessity of AI, it can be said that there is insufficient consensus on specific needs. Looking at related studies, there are many differences in the direction of AI education content and methodology, because awareness of necessity becomes a prerequisite for setting the direction, and accordingly, the direction such as educational content and method is determined. Therefore, this study aims to explore the direction of AI education by analyzing the difference in perceptions of the need for AI education between experts and the school field, and analyzing the perception of the need for AI education that everyone can relate to.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.149-163
• /
• 2022

With the development of the culture industry, online transactions of cultural products are being activated, and offering information and establishing relationship with customers in web-site have an important influence on online purchase decision making. The purpose of this research is to examine the effect of information and relational benefits provided by online sales sites of cultural products on online purchasing intention, and to reveal through empirical analysis whether these influences show a difference between stage products and screen products. Looking at the results of the study, first, in the case of the whole, both information offering and relational benefits have a significant effect on online purchasing intention. Second, in the case of stage products(plays), product understanding information, economic relational benefits, and customization relational benefits showed significant effects, but product purchasing information showed no significant influence. Third, in the case of screen products(movies), product purchasing information and economic relational benefits showed a significant effect, but product understanding information and customization relational benefits had no significant effect. In conclusion, the impact of information offering and relational benefits on online purchasing intention differs according to cultural products, and economic relational benefit is found to be an important influencing factor on online purchase decision making in all cases. These research results are expected to be helpful in establishing differentiated marketing strategies including customer relationship management in online transactions of cultural products.