• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2019

In this study, city gas is the most commonly used in homes, and gas accidents are increasing as demand increases. Among them, accidents due to user carelessness are the most and we try to provide information by establishing scenarios to effectively prevent this. The gas leak in the home is an enclosed space, and the appropriate Gaussian model is applied. As smart home control technology is developed by the 4th industrial revolution, it will make a foundation to provide information through program to predict and prevent gas leakage accidents and apply it to smart home safety platform.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.1-9
• /
• 2011

In this study, the specifications of the components of the vent vale were optimally determined in order to enhance the performance of the vent valve. Design objective was to minimize fuel leakage while satisfying the design constraints on the performance indices. To obtain the optimum solution based on real experiments, several design techniques available in PIAnO, a commercial PIDO tool, were used. First, an orthogonal array was used to generate training design points and then real experiments were performed to measure the experimental data at the training design points. Next, Kriging metamodels for the objective function and design constraints were generated using the experimental data. Finally, a genetic algorithm was employed to obtain the optimization results using the Kriging models. Fuel leakage of the optimized vent valve was found to be reduced by 95.8% compared to that of the initial one while satisfying all the design constraints.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.4
• /
• pp.571-580
• /
• 2015

In this paper, a computational study was conducted in order to investigate the rotor blade sweep effect on the aerodynamics of a small axial supersonic impulse turbine stage. For this purpose, three-dimensional unsteady RANS simulations have been performed with three different rotor blade sweep angles ($-15^{\circ}$, $0^{\circ}$, $+15^{\circ}$) and the results were compared with each other. Both NTG (No tip gap) and WTG (With tip gap) models were applied to examine the effect on tip leakage flow. As a result of the simulation, the positive sweep model ($+15^{\circ}$) showed better performance in relative flow angle, Mach number distribution, entropy rise, and tip leakage mass flow rate compared with no sweep model. With the blade static pressure distribution result, the positive sweep model showed that hub and tip loading was increased and midspan loading was reduced compared with no sweep model while the negative sweep model ($-15^{\circ}$) showed the opposite result. The positive sweep model also showed a good aerodynamic performance around the hub region compared with other models. Overall, the positive sweep angle enhanced the turbine efficiency.

• Journal of Drive and Control
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2021

In a hydraulic control system, since a hydraulic cylinder drives a relatively large mass of an object, an external load force acts as a disturbance on the control performance of the system. Additionally, as the hydraulic system is used for a long period, there are disturbances that occur gradually, such as a drop in supply pressure because of abrasion of the pump, oil leakage from a valve, and oil leakage from a cylinder. In this study, a state feedback controller based on a linearization technique is applied. To prevent the performance degradation of the controller from the load disturbance, an Extended Luenberger observer (ELO) is used for the Extended system. The case of using the proportional controller, which is a representative linear controller, and the result of using the controller designed in this study are compared and reviewed through simulation. Also, we propose an experimental gain-setting method for a state feedback controller that can be used at industrial sites, and examine how the stability and control performance of the system changes because of the disturbance inputs through the experimental results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.1
• /
• pp.109-126
• /
• 2013

Recently the core technology leakage continues to increase. It is critical issue relating to national competitiveness rely on the company's competitiveness as well as both survival and competitiveness of company. So other countries have impyz roved their laws consistently to solve these problems. And recently our country amended the law. In the paper, we will analyze world's various laws and institutions relating industrial core technologies. And this paper will provide the suggestion to settle and to develop our country's industrial core technology's protection by refer to other laws.

• Journal of Industrial Convergence
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Various cryptographic technologies have been proposed from ancient times and are developing in various ways to ensure the confidentiality of information. Due to exponentially increasing computer power, the encryption key is gradually increasing for security. Technology are being developed; however, security is guaranteed only in a short period of time. With the advent of the 4th Industrial Revolution, encryption technology is required in various fields. Recently, encryption technology using homomorphic encryption has attracted attention. Security threats arise due to the exposure of keys and plain texts used in the decryption processing for the operation of encrypted information. The homomorphic encryption can compute the data of the cipher text and secure process the information without exposing the plain text. When using the homomorphic encryption in processing big data like stored personal information in various services, security threats can be avoided because there is no exposure to key usage and decrypted information.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.162-173
• /
• 1996

Dry magnetic particle inspection(MPI) was performed to detect the surface defects of steel ingot cast billets. Magnetic properties of several materials were characterized by the measurement of the B-H hysteresis curve. The inspection results were evaluated in terms of the magnetizing current, temperature, and the amount of magnetic particles applied to billets. Magnetic flux leakage near the defect site of interest was measured and compared with the results of calculation by the finite element method in the case of direct magnetizing current. Direct and alternating magnetizing currents for materials were deduced by the comparison of the inspections. Results of the magnetic particle inspection by direct magnetizing current were compared with those of finite element method calculations, which were verified by measuring magnetic leakage flux above the surface and the surface defects of the material. For square rods, due to the geometrical effect, the magnetic flux density at the edges along the length of the rods was about 30% of that at the center of rod face for a sufficiently large direct magnetizing current, while it was about 70% for an alternating magnetizing current. Thus, an alternating magnetizing current generates rather uniform magnetic flux density over the rods, except for the region on the face across about 10 mm from the edge. The attraction of the magnetic particle by the magnetic leakage field was nearly independent of the surface temperature of the billets up to $150^{\circ}C$. However, the temperature should have been limited below $60^{\circ}C$ for an effective fixing of gathered magnetic particles to the billet surface using methylene chloride. We also found that the amount of applied magnetic particles tremendously affected the detection capability.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.117-123
• /
• 2018

Recently, aqueous method has attracted lots of attention because it enables the solution-processed metal oxide thin film with high electrical properties in low temperature fabrication condition to various flexible devices. Focusing the development of aqueous route, many researchers are only focused on metal oxide materials. However, for expansive application of the aqueous-based metal oxide films, the systematic study of performance change with process variables for the development of aqueous-based metal oxide insulator film is urgently required. Here, we propose importance of process variables to achieve high electrical-performance metal oxide insulator based on the aqueous method. We found that the significant process variables including precursor solution temperature and humidity during the spincoating process strongly affect chemical, physical, and electrical properties of $AlO_x$ insulators. Through the optimization of significant variables in process, an $AlO_x$ insulator with a leakage current value approximately $10^5$ times smaller and a breakdown voltage value approximately 2-3 times greater than un-optimized $AlO_x$ was realized. Finally, by introducing the optimized $AlO_x$ insulators to solutionprocessed $InO_x$ TFTs, we successfully achieved $InO_x/AlO_x$ TFTs with remarkably high average field-effect mobility of ${\sim}52cm^2V^{-1}\;s^{-1}$ and on/off current ratio of 106 at fabrication temperature of $250^{\circ}C$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4400-4419
• /
• 2021

In the 4th Industrial Revolution, the healthcare industry is undergoing a paradigm shift from post-care and management systems based on diagnosis and treatment to disease prevention and management based on personal precision medicine. To optimize medical services for individual patients, an open ecosystem for the healthcare industry that allows the exchange and utilization of personal health records (PHRs) is required. However, under the current system of hospital-centered data management, it is difficult to implement the linking and sharing of PHRs in practice. To address this problem, in this study, we present the design and implementation of a patient-centered PHR platform using blockchain technology. This platform achieved transparency and reliability in information management by eliminating the risk of leakage and tampering/altering personal information, which could occur when using a PHR. In addition, the patient-consent system was applied to a PHR; thus, the patient acted as the user with ownership. The proposed blockchain-based PHR platform enables the integration of personal medical information with scattered distribution across multiple hospitals, and allows patients to freely use their health records in their daily lives and emergencies. The proposed platform is expected to serve as a stepping stone for patient-centered healthcare data management and utilization.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.167-171
• /
• 2014

Hydrofluoric acid (HF), a typical inorganic acid, has been used in the industry for its various usage and classified as the toxic compound, because it can cause the pneumonia and pulmonary edema when it was exposed to respiratory organs. The official environmental analytical method for fluorine and its compound in waste has not been developed. For this reason, we have faced some problem to treat the contaminated wastes by the HF leakage from industrial process. In this study, prepared for analytical method for combustible waste (crop, trees, etc.) generated from HF leaking accident and to be applied as the official analytical method for fluorine contaminated waste when the fluorine and its compound will be regulated as a hazardous material by the waste management law later.