• The Journal of Korean Medicine
• /
• v.25 no.3
• /
• pp.160-168
• /
• 2004

Background and Objectives: Tinnitus is on the increase due to the increase in the elderly population, industrial pollution and noise pollution. This symptom is especially marked in patients with a hearing problem and the relationship between cause, mechanism and treatment is poorly understood. The characteristics of tinnitus and other hearing problems are well brought out using an animal model with salicylate ototoxicity. Therapeutic effects of Uncariae Ramulis and Testudinis Plastrum were expected in tinnitus and hearing problems; therefore we experimented on an animal model with salicylate ototoxicity. Salicylate is one of the most commonly prescribed drugs, although it has been recognized that salicylate induces hearing loss and tinnitus reversibly. The purpose of this study was to find the therapeutic effects of this by the morphologic study using salicylate ototoxicity. Materials and Methods : Twelve healthy Sprague-Dawley rats were divided into three groups: normal, control and sample. The sample group was treated with the extract of Uncariae Ramulis and Testudinis Plastrum (1cc/100g, once a day for 6 days). Then, to induce the salicylate ototoxicity in the control and sample groups, rats were injected intraperitoneally with sodium salicylate (500mg/kg). We observed the morphologic changes in the cochlea of the rats every 2, 3, 4 and 5 hours after injection. Results : The outer hair cells showed marked changes. Vacuolization formed in the cuticular plate and the endoplasm of the control group. The endoplasm and the cuticular plates of the sample group after 2 hours were similar to the control group, but the cuticular plates of the sample group observed after 3, 4 and 5 hours were not similar. Conclusions : The results suggest that an extract of Uncariae Ramulis and Testudinis Plastrum has therapeutic effects on an animal model with salicylate ototoxicity.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.41-47
• /
• 2010

There are many unbalanced models such as helicopter's rotor blades, small-sized precision motor in industrial applications. In the real products, their gravity center usually does not accord with the desired gravity center. If the deviation is large between them, it can be a major cause of vibration and noise as the part of model rotate. Therefore the gravity center in the rotational parts should be controlled properly because of static and dynamic balancing of the parts. In the research, the rotor blade of unmanned helicopter has been selected to obtain the high quality of balancing. In order to achieve the purpose, measuring system has been developed. In the system applied principle is three point weighting method, which is one of the Multiple-point Weighting Method. It has circle fitting for compensation of machining error, after measuring the values. From this study, the results showed that the proposed measurement procedure gives reliable and precise gravity center.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.198-209
• /
• 2016

Objectives: This study aimed to provide basic data for the improvement of the guidance services for the management of the workplace environment of the specialized health management institution, by making inquiries on the perception and extent of practice by health managers and workers in the workplace. Methods: Workplaces with officially noted environmental hazards of noise, organic compounds and/or dust-metals were selected in a South Korean metropolitan city in 2015. The workplace health managers(hereinafter referred to as 'manager') and workers at 97 workplace were interviewed. Managers are those who are in charge of health management at the corresponding workplace and the workers were subjected to in-depth interviews by sampling one worker for each of the workplace. Results: The majority of the managers acknowledged the guidance services of the specialized health management institution affirmatively. Regarding the extent of practice in accordance with the guidance on engineering improvement, only 23 managers(37.1%) responded. With respect to education, 40 managers(41.2%) responded that it was implemented along with 35 workers(36.1%) who responded that they received education, showing no significant difference between manager and worker. Regarding the actual wearing of the protective equipment, however, 83 of the manager(85.6%) insisted that workers wore the protective devices while only 44 workers(49.5%) responded that they actually wore the devices, thereby illustrating a significant difference between managers and workers. Conclusions: These results suggest the urgent necessity of improvement in the mechanism of guidance services of the specialized health management institution for the workplace environment management.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.145-159
• /
• 2011

The study aimed to analyze the status quo of manufacturing work environment and the work clothes' clothing comfort and wearer mobility of welding and grinding work processes in the machine and shipbuilding industries in South Korea. A questionnaire survey was conducted for the study, which consisted of questions about work clothes' clothing comfort and wearer mobility according to body parts. The findings derived from the research were: the high impact levels of work environment factors on welding and grinding work processes were noise, metal fragment, superheat, toxic gas, UV ray factors. Subject workers' assessment of work clothes' clothing pressures were in the levels between 3 (i.e. moderate) and 4 (i.e. comfortable) in a range of 5-point scale. The impact levels of wearer mobility factor were high on the work processes of welding and grinding in machine and grinding in shipbuilding. While welding process in shipbuilding showed a 'moderate' wearer mobility level and this was because its work postures were uncomfortable yet the rate of the motion change was low. The consideration to develop the work clothes specialized for certain work processes should include the materials' protecting performance from the hazardous work environment factors; and work clothes' designs that provides workers with maximized clothing comfort and wearer mobility for bending or tilting postures of upper, lower and lateral body parts defined in the study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.145-151
• /
• 2006

Because of the limitations of maximal load tests for $VO_2max$, submaximal tests using cycle ergometer are used for field study in general. This study was conducted to evaluate validity of various submaximal tests using cycle ergometer. This study had been conducted during May to June 2005, which subjects were 15 males and 15 females in twenties. Experiment was performed with restrictive conditions which regulated ambient temperature, noise, and entrance restriction. Submaximal load test protocols including YMCA Protocol (YP), ${\AA}strand$-Rhyming Protocol (ARP), Relative heart ratio Protocol (RP), and Ramp test Protocol (RP) were compared with maximal load test which used gas mask analyser using Bruce Protocol. All submaximal load tests were highly related with maximal load test (Spearman's correlation coefficient > 0.60) with statistical significancy. The highest correlation coefficient with maximal test was found in RP. Three submaximal test results except RP were significantly different with maximal test results (Wilcoxon rank test). All submaximal tests had high validity. The reason why RP had highest validity might be that it represents Korean physical strength and individual differences better than the others. RP using cycle ergometer would make easy to study for physical capacity evaluation and field workload estimation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.333-351
• /
• 2017

Objectives: This study examines the relationships between indoor radon concentrations and distribution from soil geological mapping in the Hwacheon and Jangsu areas. Methods: GIS and a pivot table were used for inquiries about indoor radon contents, soil characteristics, and geological differences. Results: The Hwacheon area was characterized by the presence of normal and reverse faults as a passage of runoff for radon, sufficient occurrences of minerals containing uranium within granite as a radon source, a high concentration of radon within the granite area and clear differences of radon concentrations between granitic and metamorphic areas. The Jangsu area was characterized by the presence of normal faults, wide distributions of alluvium, and ambiguities on radon concentrations indoors among areas of geological differences. Considering the granite area and alluvium surrounded with granite areas, the characteristics of radon concentrations within soils and indoors in the Jangsu area are similar to those of the Hwacheon area. High concentrations are found with entisol and inceptisol in the Hawcheon area, but with entisol, inceptisol, and ultisol in the Jangsu area. High radon concentrations are found in sandy loam and/or loam. High concentrations are found in recently constructed or brick buildings, but low concentrations in traditional or prefabricated houses showing a high possibility of outward flow. Conclusions: The overall results suggest that radon concentrations in the Hwacheon and Jangsu area are dominantly influenced by geological characteristics with additional artificial influences.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.35-41
• /
• 2012

This paper proposes a new methodology for the real-time on-line quality monitoring of biofuel processes through the integration of infrared spectroscopy and chemometrics. A method of Partial Least Squares (PLS) in Chemometrics is employed for quantitative analysis of key components in bioethanol products. After a number of preprocessing methods and variable importance in projection (VIP) are used, Savitzky-Golay method showed the best performance in terms of spectrum correction, noise reduction, and model maintenance. The proposed method allows us to economically forecast the concentration of multiple impurities encountered with the production of bioethanol. The proposed system is also accurate enough ($R^2$ > 0.99) to replace the laboratory analysis.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.211-225
• /
• 2006

Gabion can be used for the purpose of preventing overflow of river and side loss of road. However the manufacturing process of the gabion is manually controlled especially to the joining process at the terminal part of gabion with small diameter wire. In this paper automatic feeding guide system was designed and fabricated to make automation. The fabricated system was tested in the factory level. Pneumatic system was considered as the main idea of the feeding system. 3/2-way and 5/2-way manual control valve, eight double-acting cylinders were used. The system took 46.48 seconds during a cycle. Additional environmental noise and vibration were not detected when the machine operated at the working area. Based on the theoretical simulation and actual test the fabricated system was well controlled. The system was applied to the patent in 2006.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.413-416
• /
• 2017

The development of the internet, which is due to the advent of the fourth industrial revolution, has been slowly affecting our lives. Based on this trend, various products have recently emerged, and have yet to be developed in the context of identifying the dangers of infant babies. Increasingly, children are experiencing problems with detecting and responding to children's lives because of their daily living noise and housekeeping activities. This project attempts to develop a raspberry pie and an audiovisual sensor module to avoid the risk of preventing unwanted behavior from tripping the child's sudden behavior in everyday life. Further, it was designed to provide convenience to the guardian's convenience by implementing the smartphone app with the Wifi signal.

• Clean Technology
• /
• v.18 no.1
• /
• pp.31-37
• /
• 2012

Biomass has become a major feedstock for bioenergy and other bio-based products because of its renewability and environmental benefits. Various researches have been done in the prediction of crucial characteristics of biomass, including the active utilization of spectroscopy data. Near infrared (NIR) spectroscopy has been widely used because of its attractive features: it's non-destructive and cost-effective producing fast and reliable analysis results. This work developed the multivariate statistical scheme for predicting weight loss profiles based on the utilization of NIR spectra data measured for six lignocellulosic biomass types. Wavelet analysis was used as a compression tool to suppress irrelevant noise and to select features or wavelengths that better explain NIR data. The developed scheme was demonstrated using real NIR data sets, in which different prediction models were evaluated in terms of prediction performance. In addition, the benefits of using right pretreatment of NIR spectra were also given. In our case, it turned out that compression of high-dimensional NIR spectra by wavelet and then PLS modeling yielded more reliable prediction results without handling full set of noisy data. This work showed that the developed scheme can be easily applied for rapid analysis of biomass.