• Korean Journal of Occupational Health Nursing
• /
• v.29 no.2
• /
• pp.106-113
• /
• 2020

Purpose: This study aimed to analyze industrial accident compensation insurance coverage and industrial accidents among concrete mixer truck drivers. Methods: Original data on industrial accidents from 2012 to 2017 were analyzed through descriptive statistics. Results: Industrial accident compensation insurance coverage was 44.6% in 2017. Most concrete mixer truck drivers were affiliated with small businesses. A total of 61 industrial accidents occurred in 2012, 65 in 2014, and 80 in 2017. The major types of industrial accident were falls, slips, and crushes. Conclusion: Because concrete mixer truck drivers are at high risk for industrial accidents, industrial accident compensation insurance coverage and industrial accident prevention should be strongly enforced.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.460-465
• /
• 2001

In the present study, steady and unsteady flow characteristics inside an industrial mixer with flat turbine type impeller are studied. For the flow analysis, STAR-CD is used with an automatic mesh generator developed in the present study. flow results are compared to the an available experimental data to show validity or the present simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.5
• /
• pp.589-595
• /
• 2002

Fluid mixing is ubiquitous and essential in many natural and industrial systems. Understanding the mixing processes that occur in these diverse systems is essential for predicting many aspects of practical importance. The objective of this study was to develop a new mixing element and to perform the experimental investigation of flow and mixing in a static mixer that is equipped the new element and the others. Glycerin and gear oil were used as mixing fluids. Pressure drops across the static mixer elements of different designs and different numbers were measured using a hydraulic manometer The axial and cross-sectional views of tracer mixing were photographed using a digital camera. The pressure drops of SSM mixer were about 20% less than that of Sulzer mixer whereas the mixing performance of SSM mixer was not so good as that of Sulzer mixer

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.437-443
• /
• 2018

This study investigates the effect of the mixing elements on the pressure loss and mixing performance in line mixer. The high density ozone water devices mixed with gas and liquid are used in various fields such as sterilizing of group feeding facilities and water quality management at a fish farm. Due to the decrease in rainfall due to climate change, pasteurization of drinking water from ground water and surface water is extremely important. Therefore, it is intended to develop a line-mixed gas liquid mixer with a small amount of space. In this study, the effects of the number of static mixers and the types and the number of the orifice used in line mixer on the volume fraction and the pressure loss were studied by CFD simulation. The pressure drops of line mixer with orifice which curved vanes were attached to were down to more than 50 percent of that of line mixer with static mixer whereas the mixing performance of the former was similar to that of the latter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.797-803
• /
• 2007

The Industrial Mixers are used in various industrial fields where they are necessary to intimately mix two reactants in a short Period of time. However. despite their widespread use, complex unsteady flow characteristics of industrial mixers are not systematically investigated. The present study aims for clarify unsteady flow characteristics Induced by various impellers in a tank. Impellers are pitched blade turbine(PBT) types, Screw type and Rushton turbine type. In this study choice of the industrial mixer's impeller type using PIV and CFD method. The rotating speed of impellers are fixed by 100RPM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.413-419
• /
• 2006

The Industrial Mixers are used in various industrial fields where they are necessary to intimately mix two reactants in a short period of time. However, despite their widespread use, complex unsteady flow characteristics of industrial mixers are not systematically investigated. The present study aims for clarify unsteady flow characteristics induced by various impellers in a tank. Impellers are pitched blade turbine(PBT) types. Screw type and Rushton turbine type. In this study choice of the Industrial Mixer's Impeller type for distribution of concentration and PIV measurement method. The rotating speed of impellers are fixed by 100RPM.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.471-474
• /
• 2006

The Mixer is apparatus that help precipitation or an inhomogeneous distribution of various phases to be mixed and that user makes necessary material mixing one or the other. Mainly the mixer which is used from chemical and food industry is very important system in engineering that mixes the material. The inside flow of the mixer under the actual states which put a basis in flow of the fluid is formed rotation of the impeller. The inside flow of impeller will be caused by various reasons change with shape of impeller, number of rotation, mixing material and flow pattern of free surface etc. Also mixer study depended in single-phase flow and experimental research. So the numerical analysis of flow mixing solid-fluid particle is simulated. It is become known, that the case where agitator inside working fluid includes the solid particle the sinkage reverse which the solid particle has decreases an agitation efficiency. From the research which it sees the hazard solid which examines the effect where the change of the sinkage territory which it follows agitation number of revolution and diameter of the particle goes mad to an agitator inside flow distribution - numerical analysis the inside flow distribution of liquid state with Eulerian Two-Phase Method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1529-1534
• /
• 2008

Recently, mixers are being widely used in the display and semiconductor company in order to mix the chemical materials. The mixer normally consists of shaft, hub, reduction gear, and driving motor. It is one of the key design factors to evaluate the dynamic characteristics caused by the rotation. In this study, the dynamic characteristics of the high speed mixer, such as vibration, noise and thermal radiation, are verified by the experiment. Through the experiment, it is shown that the structural unbalance mass of high speed mixer is the important source of the severe vibrations and maximum temperature is mixer bowl.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.219-224
• /
• 2020

Industrial mixers to homogeneously blend particulate materials have been developed and widely used in various industries. However, most industrial mixers have at most two-degree-of-freedom for the operation, which limits the range of operation parameter selection for optimal blending. This paper proposes a multi-degree-of-freedom robotic mixer designed by converging a conventional drum blender and a robotic manipulator and evaluated its performance in a virtual operating environment. Discrete element simulations were conducted for mixing performance evaluation. The numerical results showed that the proposed mixer design exhibits a better mixing performance than conventional ones.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.627-630
• /
• 2002

In the present study a mesh generation program is developed for the flow analysis of industrial mixers. With this program one can select various design parameters such as impeller types, vessel type, number of baffles, number of blades, blade pitched angle, stages of impeller, rotational speed etc. Post processing capabilities are also imbedded in the program. Along with brief explanation of the program, examples of flow simulation for various type of mixers by using the program are also presented to show effectiveness of the program. It is expected that this program can be used to understand the effect of design parameters on the performance of particular type of the mixer, and hence to achieve the optimal design.