• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.180-184
• /
• 2010

This paper proposes a robot motion authoring using finger-robot interaction. The proposed method is a user friendly method that easily authors (creates and controls) robot motion according to the number of fingers. The effectiveness of the proposed motion authoring method was verified based on motion authoring simulation of an industrial robot.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2017

It is necessary to make efforts to resolve complaints such as the mismatch of the labor market and the re-education costs for the new employees by acting as the higher vocational education center of the university. This course introduces the case of developing a practical curriculum based on the competency units presented in the curriculum of the application system that meets the demands of the human resources development and the industrial field demands of the machinery area corresponding to the demand of the industrial society. By analyzing the job duties of industry, it is necessary to develop the new curriculum after grasping the level of demand according to the area, and the importance of the ability to equip as a professional technical manpower and to create high performance is increased. It will help to improve the employment rate of students through the development of field-oriented curriculum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1142-1147
• /
• 2016

Recently, IoT(Internet of Things) has been extensively researching to provide intelligent services by fusing ICT. Especially with the advent of Germany's Industry 4.0, it is emphasized the importance of the industrial IoT to maximize the production capacity. Accordingly, a lot of efforts to spread the smart factory base of industrial IoT have continued domestically as well as abroad. But the current smart factory systems have controlled equipment using the data declared in the embedded systems. Therefore, it is difficult to control environment that lots of equipment is installed. In this paper, we proposed equipment control system based on data base access method for industrial IoT. This method controls the equipment using data base from parameter of equipment. Through experiments that the system apply to mold shot system with a number of variables, it is shown that the proposed method can efficiently control a number of devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.3
• /
• pp.87-111
• /
• 1982

The education system is the communication field should be based on the characteristics of communication science and the function of manpower. However, the current education system at the level of college is insufficient and irrational to meet the requirements of the telecommunication field in our country. The main reasons are as follows: 1. Misunderstanding the characteristics of communication science. 2. Indiscretion of the categories of communication manpower due to lack of coordination between academic circles and communication industrial field. Telecommunication function could be performed only by combining the engineering and the suitable operational control. The communication engineering is similar to the electronic engineering, but the former should follow the miscellaneous international protocol and the domestic regulations, being only a means for the telecommunication function. In order to improve the education system of communiation, we aim to identify the principle of communication science, orthodoxy of the education, the categories of communication industrial field and manpower. The present system has been formed on the basis of ignoring the attributes of manpower and historical background of communication science. Therefore, this paper proposes to set up new departmental organizations for educating communication manpower as the following: In addition, this paper proposes a new curriculum model of the above twodept, and we believe that it well turn out more scientific, effective and reasonable education for the communication science. 1. Modification of the present formation, designated Electronic Communication Department. 2. New formation model: A. The best future model such as establishing ad independent telecommunication college which is composed of : Dept. of Radiocommunication Dept. of Telecommunication Enginnering Dept. of Communication Industrial management Dept. of Transmission Engineering Dept. of Telecommunication Law B. An immediately practicable proposal model instead of the existin Dept.. which is composed of the first two Dept. of the above five Dept. In addition, this paper proposes a new curriculum model of the above two dept. and we believe that it will turn out the education for the communication science to be more scientific, effective and reasonable.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.709-716
• /
• 2017

Purpose: NCS(National Competency Standards) is a systematic organization of knowledge, skills, and literacy required for performing tasks in industrial settings. This research aims to search for keywords that are important to us and to present key directions of education for the fourth industrial age in the future. Methods: The systematic classification system of NCS was investigated and the classification code structure was analyzed. Among them, the frame and structure analysis of the classification code of quality was analyzed using R-program. Results: This study grasped the quality classification situation of NCS and suggested improvement plan from the operational aspect of the fourth industrial revolution era. Conclusion: In conclusion, this study suggested the idea of education direction of SMEs(Small and Medium-sized Enterprises) in the era of the 4th industrial revolution by understanding NCS which reflects Korean characteristics.

• Journal of Engineering Education Research
• /
• v.20 no.1
• /
• pp.18-27
• /
• 2017

This study aims to investigate industry needs for convergence education in the field of nano-technology, bio-technology, robot, and design. Firstly, the area of convergence technology in nano-tech, bio-tech, robot, and design fields was examined through the literature review and case study. The areas were validated by the experts review who consisted of four industry experts and four professors in the relevant fields. Second, a questionnaire was developed for investigating industry's needs on convergence education. The questionnaire consisted of three parts: 1) awareness of necessity for convergence education, 2) the needs for convergence new technology education from the perspective of industry, and 3) opinions on convergence education. The questionnaire was validated by three engineering education experts. Third, the survey was conducted in cooperation with the Sector Council of Industrial Resources. A total of 400 respondents responded to the questionnaires: 98 in the nano-technology field, 74 in the design field, 58 in the robotics field, and 170 in the bio-technology field. Fourth the industry needs for convergence education were analyzed and implications were suggested. The results of this study are expected to provide a guideline for developing convergence education programs in higher education.

• Journal of Engineering Education Research
• /
• v.26 no.3
• /
• pp.72-80
• /
• 2023

Recently, in terms of the future education, the need of the software education according to the 4th industrial revolution and the need of the ESG(environmental, social and governance) education according to social requests for sustainability are increasing at the same time. There may be a number of ways to satisfy the needs at the same time. In this paper, as an effort for meaningful implementation of the future education, a case study on the ESG engineering education based on the software education for community youth was analyzed and a future development direction was suggested. This ESG engineering education deals with the development and application of the program considering terms of target, method and implementation in order to enhance its systematicity and using physical computing and upcycling methods and a collaborative education support system. To verify the education program, a survey is performed and analyzed. Through this, the basis of an software education-based ESG engineering education model was established.

• Journal of Engineering Education Research
• /
• v.21 no.2
• /
• pp.39-50
• /
• 2018

In the 4th industrial revolution, the maker movement is spreading around the world with the fusion of advanced technology with product manufacturing. Already in developed countries such as the US and Japan, the emphasis is on maker education that integrates education into traditional makers' movement. Through this, we are fostering young talents who will lead the fourth industrial revolution era. Domestic maker education is mainly performed in the maker space, and is limited to the IT field using Arduino and App-Inventor. Therefore, it has the limitation of fostering IT-oriented makers. Therefore, it is affecting the proliferation of the maker's movement because of the difficulty of participation of the general public. The purpose of this study was to understand the characteristics of maker 's movement and to suggest the direction of Korean maker education. In order to accomplish the purpose of research, we analyzed the case of convergent maker education at D Creation Economic Innovation Center, which combines IT and culture technology. We conducted a case study on maker education(VR production project, electronic publishing, beads craft, leather craft, IoT) which was held from July 8 to August 30, 2017 five times. We conducted interviews with five preliminary makers who participated in all the courses of the education, and five instructors who acted as professional makers with pre- developed questionnaires. The results of the study were derived by applying the Thematic Analysis method after opening the contents of the interview. Based on the results of the study, we could suggest characteristics of Korean makers and future direction of maker education.

• Journal of Engineering Education Research
• /
• v.13 no.3
• /
• pp.18-33
• /
• 2010

This paper describes two capstone senior design courses for the Mechanical Engineering program at University of the Pacific. The first course taught in the Fall semester is entitled "Engineering Design/Senior Project I." The second course taught in the Spring semester is entitled "Engineering Design/Senior Project II." All Mechanical Engineering students with senior standing are required to take these two classes in this sequence. At the end of every Spring semester, industrial advisors are invited to assess the final senior projects during an annual Senior Project Day. This assessment is performed using the Program Outcomes and Program Educational Objectives established for Pacific's Mechanical Engineering program. Since all Mechanical Engineering students are required to complete senior projects, this is a 100% evaluation process. After the evaluations are done, the data sets are compiled and reviewed by the faculty for assessment purposes. It is important to note that the industrial advisors perform the evaluations, but the faculty members assess the information to determine if modifications need to be made to the program or courses. In addition to the senior project evaluations, general feedback from Mechanical Engineering Industrial Advisory Committee (MEIAC) members is also useful for the outcomes-based assessment process in addition to the definition and evaluation of Program Outcomes and Program Educational Objectives.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.69-77
• /
• 2012

GNTECH-ICEE, which this study seeks to investigate and evaluate, demonstrates a new system of training innovative engineers. An essential component of this operation is a Small Engineering Group (SEG) that links professors, students and industrial experts together, to study and apply different techniques in determining the processes and products that relate industrial sectors needs. As an education program, SEG also provides a right direction for educating students, and generates industry-university link based human resources. Through these efforts, GNTECH-ICEE has effectively trained creative, professional, and practical engineers, by operating a variety of programs for meeting industrial needs and enhancing engineering education. SEG has many merits that have influenced its success so far, but the program also faces some challenges. The merits include; strong group bondage, practical ability incubation, and efficient administrative support. In terms of demerits, it is evident that sufficient theoretical education and local small-middle size enterprises (SMEs)' sustainable participation cannot be warranted. Thus, we propose that initiative strategies have been helpful to maximize GNTECH-ICEE's goal of making students into multi-player engineer, but continuously financial and administrative strategies be put into place in order to guarantee SMEs' long-term devotion to the program, and to help create a sustainable network between students and the companies involved.