• 산업공학
• /
• 제12권2호
• /
• pp.294-304
• /
• 1999

This paper describes the theoretical background and detailed structure of Navi-HEGS (Navigation system Human factors Evaluation and Guideline System) which has been developed for the human factors and HMI(Human-Machine Interface) researches for a CNS (Car Navigation System) and a digital map. Navi-HEGS is and integrated system that consists of a digital map UIMS(User Interface Management System), a CNS simulator, various evaluation tools, and a design guideline system. If Navi-HEGS is properly applied and utilized, it is possible to extract the substantial users requirements and preferences of a CNS and a digital map and then, these requirements can be simulated and evaluated with various human factors evaluation techniques. Applications of Navi-HEGS can improve the CNS usability, drivers safety and performance that directly affect the success of ITS(Intelligent Transport System). Also, results can be used as the basic data to establish the standards and design guidelines for the driver-centered CNS design.

• Industrial Engineering and Management Systems
• /
• 제3권1호
• /
• pp.59-62
• /
• 2004

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficiency of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which have usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• Industrial Engineering and Management Systems
• /
• 제7권3호
• /
• pp.266-287
• /
• 2008

To manage collaborative negotiation in software system design, we have built a socio-technical argument-based negotiation management approach by integrating a Socio-technical Co-construction Process (STCP) with an Argument-based Negotiation Process (ABNP). This paper reviews relevant research work and presents each step of this approach. The STCP provides rich contextual information of technical decisions and social interactions in a system design process. The ABNP provides STCP with a negotiation management and conflict resolution strategy by guiding software engineers to generate, exchange and evaluate their argument claims in negotiation activities. In addition, this paper describes a prototype system which implements this new approach using the advanced Web-based software technologies with the goal of demonstrating how to systematically enhance the negotiation management capabilities in a dynamic socio-technical framework.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.85-90
• /
• 2007

This study shows a way to develop ergonomic design of a plier through quality function deployment (QFD) approach. User needs for pliers, as well as the engineering characteristics which have influence on the ergonomic quality of pliers were determined from the interviews and questionnaires with various user groups. This information was entered in the house of quality, and the results show that the handle is the most important quality factor. A new model was proposed in which ergonomic and gender aspects were considered. QFD is considered a suitable method especially for the manufacturing and/or design fields where biomechanical or physiological background is not present.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.85-93
• /
• 2009

In this paper, the geometric design for the body of a 3"-PFA-lined plug valve is concerned, and body model which has less deformed PFA-resin after infection molding process is proposed. A CAE software is used to simulate the deformation due to heat in cooling. To reduce the deformation, some small shapes are added to PFA-resin surfaces related on wall of the valve housing. And thermal stress simulation with FEM methodology is followed after that. Also, the 3D-CAD package is used during the design processes. In this study, I tried to present the possibility to use the FEM analysis in the solid modeling process. So, the design engineer will be able to use analysis package effectively on his job within the limited range.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.50-53
• /
• 2008

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.195-207
• /
• 1999

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing. The steps of developing the C&C system are as follows: 1) analysis of existing coding system and drawing type; 2) design of C&C system; 3) practice of designed coding system to a field.

• Industrial Engineering and Management Systems
• /
• 제10권4호
• /
• pp.288-291
• /
• 2011

Recommendations for older driver-friendly automobile interior design have been determined by taking into account older people's physical and cognitive characteristics. Twenty three older people (aged from 54 to 78) and five younger people (from 20 to 29) performed several tasks in actual driving conditions, in which their reaction times and performance errors were recorded. Some design factors were found to be related to older drivers' visibility and controllability. Several design recommendations were proposed in terms of cluster color and font, display location, and HVAC control type. Proposed recommendations are expected to satisfy a wider range of older drivers as these will facilitate automobile interior designs which are fitter to older drivers' visual, cognitive, and manual capabilities.

• 대한산업공학회지
• /
• 제39권6호
• /
• pp.480-485
• /
• 2013

This paper include the results of the software interface design for the ground vehicle simulators. This design allows us to upgrade the simulator easily by exchanging the engineering model when we need to change the function of algorithm or data of a simulator. That is because a main part of simulator is composed of reusable model.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.123-128
• /
• 1997

A data base design framework for predictive a preventive-maintenance system is presented in this paper in order to effectively control machines and reduce accident rates in the workplace. The data base is designed to meet general management requirements to evaluate different maintenance strategies. There are seven data files: the equipment list maintenace pesonnel, maintenance history, maintenance specification, spare part, maintenance equipment, and maintenance schedules. Each data base file has several record based upon data acquisition.