• International Commerce and Information Review
• /
• v.16 no.2
• /
• pp.47-67
• /
• 2014

Since the global financial crisis, criticism against the integrity of financial institutions proposed new financial regulations such as Basel III. These systems are expected to have impacts multilaterally on management and structure of mid- and long-term financial industry. It is also believed that financial institutions will inevitably review business model to respond to these enhanced regulations. The ongoing global financial regulation pursues regulation scope extension, introduction of global regulatory capital system, introduction of global liquidity, etc. As for quantitative index, Basel Committee on Banking Supervision is promoting QIS which is discussed mainly on implementation time from the juridical point of view. This study aims to present domestic banking industry's structural changes depending on regulation enhancement of foreign countries after global financial crisis, and suggest strategy that improves competitiveness of products. Looking at the research result, global financial regulation requires compliance with the regulations through treaties but it shows negative time center around banks. Furthermore, it is also pointed out financially advanced countries' passive attitude on regulation enhancement is problem. Therefore, regulations differentiated between developing and developed countries, dualistic regulations on financial industry, participation of advanced nations, etc are the postulation to change the structure of financial industry.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.135-141
• /
• 2011

This research was conducted to provide basic data of surplus heat for designing solar heat-storage systems. The surplus heat is defined as the heat exhausted by forced ventilations from the greenhouses to control the greenhouse temperature within setting limits. Various simulations were performed to compare the differences of thermal behaviors among greenhouse types as well as among several domestic areas by using pseudo-TMY (Typical Meteorological Year) data manipulated based both on the weather data supplied from Korean Meteorological Administration and the TMY data supplied from The Korean Solar Energy Society. Additional analyses were carried out to examine the required heating energy together with some others such as the energy balances in greenhouses to be considered. The results of those researches are summarized as follows. Regional surplus solar heats for the nine regions with 4-type were analyzed. The results showed that the ratio of surplus solar energy compared to heating energy was the highest in Jeju (about 212.0~228.0%) for each greenhouse type. And followed by Busan, Kwangju, Jinju, Daegu, Daejeon, Jeonju, Suwon and Daekwanryung. And irrespective of greenhouse types, surplus solar energy alone could cover up nearly all of the required supplemental heating energy except for a few areas.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.9-15
• /
• 2020

In this paper, we propose a case that drone (unmanned aerial vehicle), one of the representative technologies of the 4th Industrial Revolution, threatens airport safety and privacy infringement, and describes a drone control system proposal to solve the problem. Unmanned aerial vehicle (Drone) is creating a serious problem recently, In Korea, on May 21, 19, according to the Jeju Regional Aviation Administration, drones flew over Jeju Jeongseok Airfield twice in the same month, causing problems in aircraft operation. In overseas cases, two drones near the runway of Gatwick International Airport in the UK There has been a disturbance in which the takeoff and landing of the aircraft flies for a while, and various problems have occurred, such as voyeuring the private life of an individual using a drone. This paper is equipped with an Acess Point transponder mounted on a drone (unmanned aerial vehicle), and unspecified many who want to receive flight information (coordinates, altitude, and obstacles) of the drone access the drone AP, receive and receive the flight information of the drone, and receive unspecified multiple Drone AP flight information is collected and collected to provide the information of the drone currently floating on one user interface screen. In addition, an AP transponder is proposed to operate a safe drone (unmanned aerial vehicle) and the drone's flight information is transmitted., To receive and collect and collect data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.102-116
• /
• 2021

For the safe operation of autonomous vehicles, the representative technology of the 4^th industrial revolution era, a combination of various technologies such as sensor technology, software technology and car technology is required. An autonomous vehicle is a vehicle that recognizes current location and situation by using the various sensors, and makes its own decisions without depending on the driver. Perfect recognition technology is required for fully autonomous driving. Since the precise road maps provide various road information including lanes, stop lines, traffic lights and crosswalks, it is possible to minimize the cognitive errors that occur in autonomous vehicles by using the precise road maps with location information of the road facilities. In this study, the definition, necessity and technical trends of the precise road map have been analyzed, and the HD(High Definition) map prototype based on the web GIS has been built in the autonomous driving-specialized areas of Daegu Metropolitan City(Suseong Medical District, about 24km), the Happy City of Sejong Special Self-Governing City(about 33km), and the FMTC(Future Mobility Technical Center) PG(Proving Ground) of Seoul National University Siheung Campus using the MMS(Mobile Mapping System) surveying results given by the National Geographic Information Institute. In future research, the built-in precise road map service will be installed in the autonomous vehicles and control systems to verify the real-time locations and its location correction algorithm.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.562-565
• /
• 2011

In this study, we developed a bioprocess using Clostridium ljungdahlii as a biological catalyst to produce bio-ethanol, and the effect of pH on microbial growth and ethanol production was investigated. From the results of fermentation at various initial pH condition without pH control, pH of fermentation broth decreased to 4.5 within 24 h due to accumulation of by-product acetic acid and both microbial growth and ethanol production were stopped. The experimental result of initial pH 8 showed the highest microbial growth and ethanol production (0.53 g/L), since the pH drop was relatively slow. From the experiment of pH 7 maintained fermentation using pH controllable bioreactor, the maximum cell dry weight of 1.65 g/L and the maximum ethanol concentration of 1.43 g/L were obtained within 24 h. In conclusion, the C. ljungdahlii growth was enhanced by pH maintenance of neutral range, and the ethanol production was also enhanced based on the growth-associated ethanol production characteristics of C. ljungdahlii.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.176-183
• /
• 2021

Purpose: The introduction of smart factories that reflect the 4th industrial revolution technologies such as AI, IoT, and VR, has been actively promoted in Korea. However, in order to solve various problems arising from existing file-based operating systems, this research will focus on identifying and verifying non-file system-based data protection technology. Method: The research will measure security storage that cannot be identified or controlled by the operating system. How to activate secure storage based on the input of digital key values. Establish a control unit that provides input and output information based on BIOS activation. Observe non-file-type structure so that mapping behavior using second meta-data can be performed according to the activation of the secure storage. Result: First, the creation of non-file system-based secure storage's data input/output were found to match the hash function value of the sample data with the hash function value of the normal storage and data. Second, the data protection performance experiments in secure storage were compared to the hash function value of the original file with the hash function value of the secure storage after ransomware activity to verify data protection performance against malicious ransomware. Conclusion: Smart factory technology is a nationally promoted technology that is being introduced to the public and this research implemented and experimented on a new concept of data protection technology to protect crucial data within the information system. In order to protect sensitive data, implementation of non-file-type secure storage technology that is non-dependent on file system is highly recommended. This research has proven the security and safety of such technology and verified its purpose.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.9-21
• /
• 2022

In this paper, we developed a 100% detection system for entering and leaving vehicles by improving the detection rate of existing detection cameras based on the LiDAR sensor, which is one of the core technologies of the 4th industrial revolution. Since the currently operating parking lot depends only on the recognition rate of the license plate number of about 98%, there are various problems such as inconsistency in the entry/exit count, inability to make a reservation in advance due to inaccurate information provision, and inconsistency in real-time parking information. Parking status information should be managed with 100% accuracy, and for this, we built a parking lot entrance/exit detection system using LIDAR. When a parking system is developed by applying the LIDAR sensor, which is mainly used to detect vehicles and objects in autonomous vehicles, it is possible to improve the accuracy of vehicle entry/exit information and the reliability of the entry/exit count with the detected sensing information. The resolution of LIDAR was guaranteed to be 100%, and it was possible to implement so that the sum of entering (+) and exiting (-) vehicles in the parking lot was 0. As a result of testing with 3,000 actual parking lot entrances and exits, the accuracy of entering and exiting parking vehicles was 100%.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.292-303
• /
• 2022

An eco-friendly energy conversion device without the emission of pollutants has gained much attention due to the rapid use of fossil fuels inducing carbon dioxide emissions ever since the first industrial revolution in the 18th century. Polymer electrolyte membrane fuel cells (PEMFCs) that can produce water during the reaction without the emission of carbon dioxide are promising devices for automotive and residential applications. As a key component of PEMFCs, polymer electrolyte membranes (PEMs) need to have high proton conductivity and physicochemical stability during the operation. Currently, perfluorinated sulfonic acid-based PEMs (PFSA-PEMs) have been commercialized and utilized in PEMFC systems. Although the PFSA-PEMs are found to meet these criteria, there is an ongoing need to improve these further, to be useful in practical PEMFC operation. In addition, the well-known drawbacks of PFSA-PEMs including low glass transition temperature and high gas crossover need to be improved. Therefore, this review focused on recent trends in the development of high-performance PFSA-PEMs in three different ways. First, control of the side chain of PFSA copolymers can effectively improve the proton conductivity and thermal stability by increasing the ion exchange capacity and polymer crystallinity. Second, the development of composite-type PFSA-PEMs is an effective way to improve proton conductivity and physical stability by incorporating organic/inorganic additives. Finally, the incorporation of porous substrates is also a promising way to develop a thin pore-filling membrane showing low membrane resistance and outstanding durability.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.95-102
• /
• 2024

This study aims to compare the role of the public sector in the U.S. and Korean medical security systems and study response measures in the social risk situation of the COVID-19 virus. The COVID-19 pandemic was a typical case of a 'disaster' that spread across the world across borders in a short period of time and caused serious social welfare losses by increasing the annual number of deaths by approximately 4% in 2020. Threats to health security, such as changes in social order, unpredictable endings, prolonged control of daily life, and deepening inequality, affected the economy, politics, and environment as a whole, and people had to experience anxiety and confusion due to mental and physical stress. Furthermore, developed countries failed to provide help to low-income countries in the face of global disasters. In this situation, the country's disaster management capacity to minimize harm and secure resilience, especially disaster response capacity in the health and medical field, is inevitably very important. Therefore, this study compares how the health insurance system, which is a system to guarantee citizens' right to life, differs from the United States, a liberal health care country, and raises the need to strengthen the role of the public sector.