• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.104-104
• /
• 1997

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 춘계학술발표대회 및 제10회 신소재 심포지엄 논문개요집
• /
• pp.27.2-27.2
• /
• 2006

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.39-40
• /
• 1998

• 한국진공학회지
• /
• 제6권3호
• /
• pp.267-274
• /
• 1997

고밀도 유도결합 $Cl_2$ 및 HBr/$Cl_2$ 플라즈마를 이용하여 차세대 반도체 집적회로에 사용가능한 STI(Shallow Trench Isolation)구조에서 trench 식각시 trench etch profile 및 격자손상에 영향을 미치는 공정변수의 효과에 대하여 연구하였다. 식각결과 $Cl_2$만을 사용한 경우에는 trench 식각공정 동안 화학적 측면식각의 증가로 인하여 등방성 식각이 얻어지고 이는 유도입력 전력이 증가하고 바이어스 전압이 감소함에 따라 이의 경향이 증가하였다. 측면식각의 정도는 $Cl_2$에 $N_2$ 및 $O_2$의 첨가에 따라 감소하였다. 순수 HBr을 사용한 경우에 있어서는 Br 라디칼이 Cl 라디칼에 비하여 자발적인 실리콘 식각의 민감도가 감소하여 positive angle의 식각형상이 얻어졌으며 HBr내에 $Cl_2$의 증가에 따라 이방성 식각이 얻어졌 다. 물리적인 격자손상을 투과전자현미경으로 관찰한 결과 <$Cl_2/N_2$및 HBr을 함유한 식각가 스를 사용한 경우에 trench표면에서 결함이 관찰되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.361-365
• /
• 2003

Planar Inductively Coupled Plasma (PICP) etching of InGaP was performed in $BCl_3,\;BCl_3/Ar\;and\;BCl_3/Ne$ plasmas as a function of ICP source power ($0\;{\sim}\;500\;W$), RIE chuck power ($0\;{\sim}\;150\;W$), chamber pressure ($5\;{\sim}\;15\;mTorr$) and gas composition of $BCl_3/Ar\;and\;BCl_3/Ne$. Total gas flow was fixed at 20 sccm (standard cubic centimeter per minute). Increase of ICP source power and RIE chuck power raised etch rate of InGaP, while that of chamber pressure reduced etch rate. We also found that some addition of Ar and Ne in $BCl_3$ plasma improved etch rate of InGaP. InGaP etch rate was varied from $1580\;{\AA}/min$ with pure $BC_3\;to\;2800\;{\AA}/min$ and $4700\;{\AA}/min$ with 25 % Ar and Ne addition, respectively. Other process conditions were fixed at 300 W ICP source power, 100 W RIE chuck power and 7.5 mTorr chamber pressure. SEM (scanning electron microscopy) and AFM (atomic force microscopy) data showed vertical side wall and smooth surface of InGaP at the same condition. Proper addition of noble gases Ar and Ne (less than about 50 %) in $BCl_3$ inductively coupled plasma have resulted in not only increase of etch rate but also minimum preferential loss and smooth surface morphology by ion-assisted effect.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.6-9
• /
• 2012

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity to $SiO_2$) of ZnO thin films in $N_2/Cl_2$/Ar inductivity coupled plasma. A maximum etch rate and selectivity of 108.8 nm/min and, 3.21, respectively, was obtained for ZnO thin film at a $N_2/Cl_2$/Ar gas mixing ratio of 15:16:4 sccm. The plasmas were characterized by optical emission spectroscopy. The x-ray photoelectron spectroscopy analysis showed the efficient destruction of oxide bonds by ion bombardment. An accumulation of low volatile reaction products on the etched surface was also shown. Based on this data, an ion-assisted chemical reaction is proposed as the main etch mechanism for plasmas containing $Cl_2$.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.229-233
• /
• 2007

In this study, we carried out an investigation of the etching characteristics(etch rate, selectivity) of $HfO_2$ thin films in the $CH_4/Ar$ inductively coupled plasma. It was found that variations of input power and negative dc-bias voltage are investigated by the monotonic changes of the $HfO_2$ etch rate as it generally expected from the corresponding variations of plasma parameters. At the same time, a change in either gas pressure or in gas mixing ratio result in non-monotonic etch rate that reaches a maximum at 2 Pa and for $CH_4(20%)/Ar(80%)$ gas mixture, respectively. The X-ray photoelectron spectroscopy analysis showed an efficient destruction of the oxide bonds by the ion bombardment as well as showed an accumulation of low volatile reaction products on the etched surface. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the $CH_4-containing$ plasmas.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.635-639
• /
• 2003

We investigated dry etching of GaAs and AiGaAs in a high density planar inductively coupled plasma system with BCl$_3$and BCl$_3$/Ar gas chemistry. A detailed etch process study of GaAs and ALGaAs was peformed as functions of ICP source power, RIE chuck power and mixing ratio of $BCl_3$ and Ar. Chamber process pressure was fixed at 7.5 mTorr in this study. The ICP source power and RIE chuck power were varied from 0 to 500 W and from 0 to 150 W, respectively. GaAs etch rate increased with the increase of ICP source power and RIE chuck power. It was also found that etch rates of GaAs in $15BCi_3$/5Ar plasmas were relatively high with applied RIE chuck power compared to pure 20 sccm $BCl_3$plasmas. The result was the same as AlGaAs. We expect that high ion-assisted effect in $BCl_3$/Ar plasma increased etch rates of both materials. The GaAs and AlGaAs features etched at 20 sccm $BCl_3$and $15BCl_3$/5Ar with 300 W ICP source power, 100 W RIE chuck power and 7.5 mTorr showed very smooth surfaces(RMS roughness < 2 nm) and excellent sidewall. XPS study on the surfaces of processed GaAs also proved extremely clean surfaces of the materials after dry etching.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1996년도 추계학술발표회논문집
• /
• pp.63-66
• /
• 1996

Electron temperature and electron density were measured in a radio-frequency(rf) inductively coupled plasma using probe measurements. Measurements were made in an argon discharge for pressures from 10 to 100mTorr and input rf power from 100 to 800W. Spatial distribution Electron temperature and electron density were measured for discharge with same aspect ratio. Electron temperature and Electron density were found to depend on both pressure and power. Electron density was creased with increasing pressure, but peaked in a 70mTorr discharge. Radial distribution of the electron density was peaked in the plasma fringes. These results were compared to a simple model of inductively coupled plasmas.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2004

Dry etch characteristics of polysilicon with HBr/O$_2$ inductively coupled plasma (ICP) have been investigated. We determined etch late, uniformity, etch profiles, and selectivity with analyzing the cross-sectional scanning electron microscopy images obtained from top, center, bottom, right, and left positions. The etch rate of polysilicon was about 2500 $\AA$/min, which meets with the mass production for devices. The wafer level etch uniformity was within $\pm$5 ％. Etch profile showed 90$^{\circ}$ slopes without notches. The selectivity over photoresist was between 2:1∼4.5:1, depending on $O_2$ flow rate. The HBr-ICP etching showed higher PR selectivity, and sharper profile than the conventional Cl$_2$-RIE.