• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.35-37
• /
• 1993

This paper shows that the presence of constant impedance loads and induction motors in power system's loading contents can lead to transient voltage instabilities during normal system manipulations such as switchings. The abnormal induction motor characteristics during system transients which initiate the voltage instabilities are illustrated. The influence of motor and network parameters, such as motor inertia mechanical load quantity and nature on the severity of the voltage instability are studied.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.3
• /
• pp.155-159
• /
• 2018

Recently, the expansion or establishment of facilities for the logistics system is increasing. Conveyor facilities play a major role in sorting and transporting logistics. Induction motors are widely used for the operation of these conveyor systems. In the logistics system, a large number of induction motors are used. These motors have a considerable distance from the power source side and have a low power factor. The installation position for the power factor compensation of the induction motor is very important. Since the voltage drop depends on the length of the line, it is an important parameter in capacitor capacity determination for power factor compensation. The capacity of the capacitors installed to compensate the power factor of the inductive load should be designed to the extent that self-excitation does not occur. In this study, we analyze the method of compensating the proper power factor considering the voltage drop and the installation position of the induction motor in the logistics system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.2
• /
• pp.145-162
• /
• 1992

This paper proposes two design principles for expert systems to solve a stock market timing (SMART) problems : machine knowledge and fuzzy post-adjustment, Machine knowledge is derived from past SMART instances by using an inductive learning algorithm. A knowledge-based solution, which can be regarded as a prior SMART strategy, is then obtained on the basis of the machine knowledge. Fuzzy post-adjustment (FPA) refers to a Bayesian-like reasoning, allowing the prior SMART strategy to be revised by the fuzzy evaluation of environmental factors that might effect the SMART strategy. A prototype system, named K-SISS2 (Knowledge-based Stock Investment Support System 2), was implemented using the two design principles and tested for solving the SMART problem that is aimed at choosing the best time to buy or sell stocks. The prototype system worked very well in an actual stock investment situation, illustrating basic ideas and techniques underlying the suggested design principles.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.346-348
• /
• 1997

This paper presents microprocessor-based real-time speed and position detection by inductive radio loop in new transportation system, such as magnetically levitated train system, rubber tyred train, and linear-motor car. The constant elapsed time method is used in this study for high accurate detection over a wide speed range. And for reliability and safety of the system, it is duplicated and data-bus level comparison is performed by fail-safe comparator.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.77-92
• /
• 2005

Voice is made by systemic interaction of respiration, vocalization, articulation and resonation. There is no existing multi-channel voice analysis system to assess voice and respiration simultaneously. The most existing systems consist of. vocal fold vibration measurement such as stroboscopy, EGG (electroglottography) or laryngeal electromyography and voice analysis system. Since respiration has close relationship with voice simultaneous analysis of both vocal cord vibration and respiration are essential. In this study, a four channel integrated system are developed for acoustic analysis through microphone, vocal fold vibratory analysis using EGG, and respiratory analysis using two channel RIP (respiratory inductive plethysmography).

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.987-993
• /
• 2015

Wireless power transfer technologies typically include inductive coupling, magnetic resonance, and capacitive coupling methods. Among these methods, capacitive coupling wireless power transfer (CCWPT) has been studied to overcome the drawbacks of other approaches. CCWPT has many advantages such as having a simple structure, low standing power loss, reduced electromagnetic interference (EMI) and the ability to transfer power through metal barriers. In this paper, the CCWPT system with 6.78MHz class D inverter is proposed and analyzed. The proposed system consists of a 6.78MHz class D inverter with a LC low pass filter, capacitor between a transmitter and a receiver, and impedance transformers. The system is verified with a prototype for charging mobile devices.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.937-943
• /
• 2012

Most of faults occurred in transmission lines are single-phase to ground faults and transient faults. Single-phase auto reclosing is an appropriate scheme to maintain the system stability and restore the system effectively when those faults are occurred. In single-phase auto reclosing scheme, the secondary arc is generated after faulted phase is tripped to eliminate the fault and it is sustained by the capacitive and inductive coupling to the healthy phases. It is important to reclose the faulted phase after fully extinction of secondary arc because of the damage applied to system. Therefore, it is necessary to research on the detection of secondary arc extinction to ensure high success rate of reclosing. In this step, firstly, the accurate modelling of secondary arc should be performed. In this paper, the modelling of secondary arc is performed by using EMTP-RV and the simulation results show that the implemented model is correct and effective.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.267-270
• /
• 2003

All artificial infernal organs which are using electric energy supply energy with inductive couple. Transcutaneous energy transmission system enhance survival chance of the patients and quality of life by reducing volume and mass. In this research, we used both tune in transmission system in state of fixing cycle in order to increase the voltage gain and the current gain and to reduce effect of leakage inductance. Also to maximize the effect of resonance, a constant frequency duty cycle control method is used. Test is progressed with litz wire which is set up with various sizes of core to minimize size of converter. This research aimed in analysis of transcutaneous energy transmission system and in measuring of stability and efficiency of Lithium-ion battery charge which are using transmitted energy.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.62-63
• /
• 2010

This paper presents a potential for application of Inductive Power Transfer(IPT) to the light railway vehicle system. IPT system allows for a vehicle fitted with existing or new generation batteries to park over a small charging unit and commence charging immediately. Regular charging will allow for smaller batteries to be used in vehicles. In this paper, IPT system uses a full-bridge LLC resonant converter and is possible for the regenerative braking which is an energy recovery mechanism.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.803-814
• /
• 2019

This paper proposes a three-phase current balancing strategy in a power transmission system employing distributed static series compensators (DSSCs). With the proposed variable quadrature voltage injection method, the DSSC emulates either an inductive or a capacitive impedance into the transmission line, and the magnitudes of the phase currents are balanced. Hence, the phase imbalances in the power transmission system are significantly reduced. As a result, the power transfer capability of the transmission lines can be improved. The operational principle of the DSSCs, the hardware structure and the control algorithm are described in detail. Finally, the theoretical analyses and the proposed strategy are experimentally verified through a scaled down transmission system with DSSC prototypes.