• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1537-1540
• /
• 2003

MEMS technology with micro scale is complete system utilized as the sensor. micro electro device. The metallization of MEMS is very important to transfer the power operating the sensor and signal induced from sensor part. But in the MEMS structures local stress concentration and deformation is often happened by geometrical shape and different constraint on the metallization. Therefore. this paper studies the effect of supporting type and thickness ratio about thin film thickness of the substrate thickness for the residual stress variation caused by thermal load in the multi-layer thin film. Specimens were made from materials such as Al, Au and Cu and uniform thermal load was applied, repeatedly. The residual stress was measured by FEA and nano-indentation using AFM. Generally, the specimen made of Al induced the large residual stress and the 1st layer made of Al reduced the residual stress about half percent than 2nd layer. Specimen made of Cu and Au being the lower thermal expansion coefficient induce the minimum residual stress. Similarly the lowest indentation length was measured in the Au_Cu specimen by nano-indentation.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.21-29
• /
• 2012

Person characteristics and the perception of organization climate affect on the performances associated with causes of job stress, and may induce various types of human errors. For incidence, a person's adaptation to organizational traits can influence on a person's performance with tasks assigned as well as job satisfaction, a change of occupation, etc. There are several evaluation methods such as an aptitude test to evaluate the suitability of department allocation. However, only person's traits such as an aptitude has been associated with department allocation and job assignment for the personnel management. This paper shows not only an evaluation result on the job-stress of the workers in nuclear power plants (NPPs), but also the relationships between the job-stress and the coincidences of group-personal, team-personal traits. Then, we systematically deduct a basic information on the factors to be considered to manage the organizational traits and job stress. We expect this result can contribute to enhance the organizational management against to the human errors as well as for the promotion of safety and efficiency of NPPs.

• 플랜트 저널
• /
• 제6권1호
• /
• pp.56-63
• /
• 2010

While the local plant market is reducing its volume, the plant market over the world since 2000s is rapidly expanding. The nation's construction companies, aggressively dedicated in launching out overseas plant market, increase the volume of orders in that sector, but there also are much difficulty in the project management as those projects ordered are gradually large scaled with more cutting-edge high-tech requirements along with comparatively higher risk. Though the local construction companies have developed their own types of measures to analyze the risk evaluation putting into practice, the specialized decision-making model for the overseas plant market or the risk measure understandable easily and applicable practically is not yet shown. This paper aims at providing the methodology to evaluate the risk by way of constructing the risk evaluation process in order to induce risk measuring elements through appropriate indexing system. Furthermore, through studying the risk management system, it aims to seek for a thorough risk management method from beginning of the project to the end.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.65-72
• /
• 2004

This paper deals with an experimental study on the dynamical characteristics of ship motion during trawling job on the real sea. The experiments were carried out on the small stern trawler, and roll and pitch motion of the ship according to the wave directions were simultaneously recorded by P/C in the same sea conditions. From these data, the statistical properties and power spectra were obtained, and then the analysis of ship motion in trwal job was made. As a result, it was found that the pitch motions in trwal job were displayed low amplitudes on the whole, but the rolling motions were displayed high amplitudes relatively, and very high value on the beam and quartering sea especially. Also, the trial ship has a high extinction coefficient in the roll motion, compared with the rule of stability, but when wave height takes 2.5m over, it can induce the safety of ship to scare occasionally. Therefore, a usefull countermeasure for the safety of ship has to be made adequately.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권2호
• /
• pp.11-14
• /
• 2004

YBCO thin films have good characteristics for current limiting materials due to compact size and high current carrying capability. But the irregularities and the extreme thin thickness of YBCO films cause some difficulties in simultaneous quench and thermal shock protection. In order to solve these problems, vertical magnetic field generated from solenoid coil was applied to the YBCO element. And also to minimize the inductance caused by the serial connection of magnetic field source with superconducting elements, magnetic field source was separated from the power lines adapting protective current transformer. In this study, electric field-current (E-I) and quench characteristics of YBCO films were analyzed both by electrical measuring method and observations of bubble propagation. From the experiment results, it was revealed that the magnetic fields generated by surrounding coil could induce the uniform quench distribution for all stripes of current limiting units and finally simultaneous quenches were realized in all serial connection of YBCO elements. In addition, the separation of magnetic field source form electrical network could be good solution for simultaneous quench of YBCO films without any unnecessary effect caused by serial connection.

• 한국콘텐츠학회논문지
• /
• 제13권1호
• /
• pp.147-155
• /
• 2013

본 연구의 목적은 공연산업의 경제적 파급 효과를 분석하는데 있다. 연구분석을 위해 한국은행의 2009년 산업연관표를 이용하여 연극, 음악 및 기타 예술(390 부문)만을 공연산업으로 한정하고 새로이 공연 산업연관표를 작성하여 공연산업의 경제적 파급효과를 분석하였다. 연구 결과, 공연산업의 총생산유발액은 391.6조원, 소득유발액은 65.1조원, 생산세유발액은 총 16.3조원으로 나타났다. 특히 공연산업의 생산유발계수는 1,387, 감응도 계수 0.020, 영향력계수 0.025, 부가가치유발계수 0.662, 소득유발계수 0.455, 생산세유발계수 0.046 그리고 노동유발계수 0.010 등으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.72-72
• /
• 2010

Recent development of organic solar cell approaches the level of 8% power conversion efficiency by the introduction of new materials, improved material engineering, and more sophisticated device structures. As for interface engineering, various interlayer materials such as LiF, CaO, NaF, and KF have been utilized between Al electrode and active layer. Those materials lower the work function of cathode and interface barrier, protect the active layer, enhance charge collection efficiency, and induce active layer doping. However, the addition of another step of thin layer deposition could be a little complicated. Thus, on a typical solar cell structure of Al/P3HT:PCBM/PEDOT:PSS/ITO glass, we used Li:Al alloy electrode instead of Al to render a simple process. J-V measurement under dark and light illumination on the polymer solar cell using Li:Al cathode shows the improvement in electric properties such as decrease in leakage current and series resistance, and increase in circuit current density. This effective charge collection and electron transport correspond to lowered energy barrier for electron transport at the interface, which is measured by ultraviolet photoelectron spectroscopy. Indeed, through the measurement of secondary ion mass spectroscopy, the Li atoms turn out to be located mainly at the interface between polymer and Al metal. In addition, the chemical reaction between polymer and metal electrodes are measured by X-ray photoelectron spectroscopy.

• 대한지역사회영양학회지
• /
• 제15권6호
• /
• pp.740-749
• /
• 2010

The purpose of this study was to develop and evaluate a nutrition education program to prevent breakfast skipping for elementary school children. Subjects were 102 5th grade students (51 boys, 51 girls) as the "education group" and 200 5th grade students (102 boys, 98 girls) as the "non-education group." The nutrition education program consisted of 4 lessons over an 8-week period. Teaching materials, including flash animation, panel, PowerPoint, and a bingo game, were developed for this education program. After education, there was significant increase in the percentage of students who had eaten breakfast every day, understood that breakfast has a great effect on health, and will eat breakfast every day in the education group compared to non-education group. Parents' positive behavior toward daily breakfast preparation and the percentage of parents who had their children eat breakfast every day increased significantly. The students of the education group responded positively to the questions of the benefit and importance of nutrition education. The flash animation received high marks, especially in terms of understanding of contents, content clarity, emphasis of the core content, delivery of necessary knowledge, and applicability of breakfast. This study shows the effectiveness of a 4-lesson nutrition education taught during an 8-week time period to induce changes in recognizing the importance of breakfast and in behavior toward breakfast consumption.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.110-114
• /
• 2005

We present a micro fluxgate magnetic sensor having solenoid coils and racetrack shaped magnetic core, which was designed to decrease the .operating power and magnetic flux leakage. Electroplated copper coils of $6\;{\mu}m$ thickness and the core of $3\;{\mu}m$ thickness were separated by benzocyclobutane (BCB) having a high insulation and good planarization characters. Permalloy $(Ni_{0.8}Fe_{0.2})$ as a magnetic core was also electroplated under 2000 gauss to induce the magnetic anisotropy. The core had the high DC effective permeability of $\~1,300$ and coercive field of $\~0.1$ Oe. The fabricated fluxgate sensor had the very small actual size of $3.0\times1.7\;mm^2$. The fluxgate sensor with a racetrack shaped core had the high sensitivity .of $\~350$ V/T at excitation condition of 3 $V_{P-P}$ and 2 MHz square wave. When two fluxgates were perpendicularly aligned in terrestrial field, their two-axis output signals were very useful to commercialize an electronic azimuth compass for the portable navigation system.

• Mycobiology
• /
• 제41권1호
• /
• pp.63-66
• /
• 2013

This study was conducted to identify a suitable color of light for development of the fruit body in Hypsizygus marmoreus. To accomplish this, samples were irradiated with blue (475 nm), green (525 nm), yellow (590 nm), or red (660 nm) light emitting diodes (LEDs) to induce the formation of fruiting bodies after mycelia growth. The diameter and thickness of the pileus and length of stipes in samples subjected to blue LED treatment were similar to those of subjected to fluorescent light (control), and the lengths of the stipes were highest in response to treatment with the red LED and darkness. The commercial yields of plants subjected to blue and green LED treatment were similar to those of the control. In conclusion, cultivation of H. marmoreus coupled with exposure to blue LED is useful for inducing high quality fruit bodies as well as higher levels of ergosterol, DPPH radical scavenging activity, total polyphenol content and reducing power.