• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.233-244
• /
• 2009

This study was focused on the transducer and suitable contact material for stone cultural heritage, and the correlation of direct-indirect method in rock types for scientific development and quantitative evaluation technique of the ultrasonic measurements. As a result, it was identified the transducer (UTREXTX(RX)54kHz) and contact material (rubber clay) of the type 3 were appropriate for the ultrasonic measurements of stone cultural heritage. The direct-indirect correction factors of type 3 were calculated 1.50 for granite, 1.38 for gabbro, 1.58 for quartz diorite, respectively. This result is the first study for improvement in reliability for the ultrasonic measurements, and it will contribute to establishment of the ultrasonic survey method for stone cultural heritage. Also, complementary studies considering the surface irregularity of rocks and various contact materials will carry out, and the database about correlation of direct-indirect in rock types will establish.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.4
• /
• pp.158-167
• /
• 2007

Indirect illumination plays an important role for realistic image synthesis. We present a novel realtime indirect illumination rendering technique using image pyramids. Hundreds of thousands of indirect point light sources are stored into images, and then they hierarchically clustered into quad-tree image pyramids. We also introduce a GPU based top-down and breadth-first traversal of the quad-trees to approximate the illumination with clusters (set of lights). All steps entirely run on the GPU in real-time. Result images demonstrate that our method represents diffuse interreflection, especially a color bleeding effect well. We achieved interactive frame rates of tens to hundreads, without any preprocessing. We can avoid artifacts caused by sampling, and our method is seven times faster than a recently proposed sampling based method.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.271-277
• /
• 2010

The randomized response technique is an indirect question that employs a randomizing device to protect respondents' privacy. The technique is now considered the most efficient of the newly developed techniques. In this technique, Chang et al. (2004) suggests an improved forced-answer technique and finds more efficient conditions than Warner did in 1965. But it is the weakness of the technique to lose more information than a direct response technique does. Therefore, a lot of researches have developed new techniques to reduce loss of information, to enhance estimated efficiency, and to efficiently use collected information. Considering this tendency, this paper also tries to improve Chang's technique. It suggests the technique that is extended from Chang's and finds more efficient conditions than Chang's technique and Mangat and Singh's (1990) did.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.2
• /
• pp.117-123
• /
• 1987

Previous studies have been performed for the sero-identification of selected species of Bacteroides by immunofluorescence antibody techniques and enzyme-linked immunosorbent assay using species-specific rabbit antisera to B. gingivalis, B. intermedius, and B. melaninogenicus. However, these studies have not commented on the serological cross-reactivity between these 3 species of black- pigmented Bacteroides. For the cross-reactivity study, antisera to B. gingivalis ATCC 33277, B. intermedius ATC C25261 and B. asaccharolyticus ATCC 25260 were raised from rabbits. Preliminary study for observing the cross-reactivity between these species was performed by indirect immunoflourescence technique. Immunoabsorption of the antisera was done with bacterial cells from the other species and the species-specificity of the antisera was conformed by the absence of reactivity with bacterial strains from the other species by indirect immunofluorescence technique and enzyme-linked immunosorbent assay. Three representative unabsorbed antisera cross-reacted strongly with cells from the other species. Especially, anti-B. asaccharolyticus ATCC 25260 antiserum showed a strong cross-reactivity with B. gingivalis ATCC33277. After immunoabsorption of 3 representative antisera with the other species, the cross-reactivity was found only between B. gingivalis ATCC 33277 and B. asaccharolyticus ATCC 25260. Further study would be necessary to clarify the cross-reactivity between important oral black-pigmented Bacteroides from subgingival plaque or bacterial colonies for rapid identification.

• Archives of Craniofacial Surgery
• /
• v.14 no.2
• /
• pp.81-88
• /
• 2013

Background: To suggest the need of more aggressive reduction techniques than closed reduction (CR) technique in nasal fracture treatment, we identified the usefulness of algorithm oriented treatment of nasal fracture that includes indirect open reduction (IOR) and external fixation (EF) as well as the CR. Methods: We compared the clinical course of the group A (n=128) where only the CR was performed regardless of the pattern of the nasal fracture and the group B (n=127) where algorithm oriented treatment including IOR and EF as well as CR was performed depending on the pattern of nasal fracture. And the degree of postoperative pain after CR and IOR technique was compared through the dose of analgesics and pain scores. Results: More than 80% of patients were satisfied the result of reduction in both group A and B. Good contour of nasal bone after reduction was showed 71% of group A and 81% of group B without significant difference. Minor (p>0.05) and major (p<0.05) deformity after reduction were less occurred in the group B than group A. Postoperatively, the dose of analgesics was significantly lower after IOR technique than CR technique (53 mg vs. 142 mg) (p<0.05). Conclusion: Algorithm oriented treatment of nasal fracture including IOR and EF as well as CR reduce major deformity after reduction than treatment of CR alone. It is useful to perform the more aggressive reduction techniques such as IOR and EF according to the pattern of fracture in treatment of nasal fracture.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.24-27
• /
• 2000

For the rapid diagnosis of vibriosis in penaeid shirmp, the indirect fluorescent antibody technique(IFAT) was established to detect Vibrio alginolyticus. The titers of the antisera used for this experiment were above 1280. Vibrio alginolyticus possesses the specific antigen, and also have antigens shared with other strains. When an V. alginolyticus-infected adult shirmp was tested by IFAT, V. alginolyticus was detected mainly in the muscle tissues near the injection point and the haemolymph but only few in other tissues. This result indicates that the pathogen bacteria could be detected by IFAT. Thus, it is suggested IFAT is more convenient and sensitive method than conventional plate method for the diagnosis of induced Vibrio infection in the penaeid shrimps.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.393-401
• /
• 2009

Objective: The purpose of this study was to compare the shear bond strength (SBS) of brackets and microleakage of a tooth-adhesive-bracket complex bonded with a direct and an indirect bonding technique after thermocycling. Methods: Fifty non-carious human premolars were divided into two equal groups. In the direct bonding group a light-cured adhesive and a primer (Transbond XT) was used. In the indirect-bonding group, a light-cured adhesive (Transbond XT) and chemical-cured primer (Sondhi Rapid Set) were used. After polymerization, the teeth were kept in distilled water for 24 hours and thereafter subjected to thermal cycling (500 cycles). For the microleakage evaluation, 10 teeth from each group were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, and examined under a stereomicroscope. Fifteen teeth from each group were used for SBS testing with the universal testing machine and adhesive remnant index (ARI) evaluation. Data were analyzed using the Mann-Whitney U test, Chi-square test, and Fisher's exact test. Results: There were no statistical differences on SBS and microleakage between the two bonding techniques. The indirect bonding group had a significantly lower ARI score. Bracket failures were obtained between enamel-resin interfaces. Conclusions: The type of bonding technique did not significantly affect the amount of microleakage and SBS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.320-325
• /
• 2009

In this study, a method to estimate the suspension bridge deflection is developed using mode decomposition technique. In order to examine the suspension bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. However, it is recognized that any measurement of movement for suspension bridges may be difficult for the absence of proper methods to measure the displacement response on site. This study aims at suggesting a method to estimate the displacement response from the measured strain signals in an indirect way to predict the displacement response, not a direct way to measure the displacement response. Additionally, by applying the FBG sensors with multi-point measurements not influenced by electric noise, it can be expected that the technique would be applicable to infrastructures.

• IE interfaces
• /
• v.11 no.2
• /
• pp.149-157
• /
• 1998

In this paper, various techniques considering the characteristics of computer memory management are suggested, which can be used in the implementation of simplex method. First, reduction technique of indirect addressing, redundant references of memory, and scatter/gather technique are implemented, and the effectiveness of the techniques is shown. Loop-unrolling technique, which exploits the arithmetic operation mechanism of computer, is also implemented. Second, a subroutine frequently called is written in low-level language, and the effectiveness is proved by experimental results. Third, row-column linked list and Gustavson's data structure are compared as the data structure for the large sparse matrix in LU form. Last, buffering technique and memory-mapped file which can be used in reading large data file are implemented and the effectiveness is shown.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.