메틸 메타크릴레이트 분자를 전구체로 사용하여 원격 플라즈마 방식으로 중합체를 합성하는 반응에서 플라즈마 출력, 반응 압력 및 직접-간접 플라즈마 방식이 필름의 성장속도 및 화학결합 구조에 미치는 영향을 조사하였으며, FT-IR, XPS 등 분광학적 분석과 Langmvir 탐침을 사용한 플라즈마 특성 진단 결과와 함께 고찰하였다. 플라즈마 출력과 반응 압력이 증가하면 성장속도가 증가하지만 특정 영역을 넘어서면 식각 효과와 잦은 충돌로 인해 활성화 효율이 낮아져 다시 감소하였다. 중합 필름의 FT-IR과 XPS 분석 결과, 필름 내 탄소/산소 조성비는 플라즈마 출력이 커질수록 증가하였으며, 탄화수소성 C-C 탄소 조성비는 증가하는 반면 에스터성 COO 탄소 조성비는 감소하였다. 직접 플라즈마법이 간접 플라즈마법에 비해 필름의 성장속도는 2~5배 빠르지만, 전구체의 분자 구조를 유지하기 위해서는 간접 플라즈마법이 유리함을 확인하였다.
목적: 본 연구에서는 4종의 간접복합레진에 대하여 금합금과 Ni-Cr합금에 대한 결합강도의 차이와 각각의 합금에 표면형태를 다르게 하여 일정한 온도의 증류수에 보관 전과 후에 전단결합강도의 차이가 있는지 알아보고자 하였다. 재료 및 방법: 금속 시편을 주조 제작하였는데, 금합금과 Ni-Cr합금의 표면형태를 flatting, bead, loop로 하여 4종의 간접복합레진(Gradia, Tescera Sinfony and in;joy)당 60개씩 총 240개를 준비하였다. 이후 금속표면에 각각의 제조사에서 지시한대로 간접 복합레진을 접착하였다. 간접복합레진의 중합 24시간 후에 만능시험기를 이용하여 전용 지그에 금속시편을 부착 후, 전단결합강도를 측정하였다. 또한 증류수에 240시간 보관 후에 같은 방법으로 전단결합강도를 측정하였다. 결과: 금속의 표면 형태에 따른 전단결합강도 측정에서 4종의 레진 모두 bead군에서 높은 결합강도를 보였고 loop, flatting 순이었다 (P < .05). 수조에서 240시간 보관 후에는 Gradia가 모든 군에서 다른 레진 군에 비해 비슷하거나, 통계적으로 유의하게 높은 (P < .05) 전단결합강도를 나타내었다. 결론: 금속표면의 형태에 따라, 금속의 종류에 따라, 물속 보관 전후에 따라 금속과 간접복합레진의 결합력의 차이를 나타내었고 추가 실험을 통해 최적의 조합에 따른 임상에서의 적용가능성을 보여주었다.
Jung, Jong Moon;Wi, Young Joo;Koo, Hyun Mo;Kim, Min Ji;Chun, Youn Sic
대한치과교정학회지
/
제47권4호
/
pp.268-274
/
2017
The purpose of this article is to introduce a simple appliance that uses a setup model and a nickel-titanium (Ni-Ti) wire for correcting the mesial rotation and drift of the permanent maxillary first molar. The technique involves bonding a Ni-Ti wire to the proper position of the target tooth on a setup model, followed by the fabrication of the transfer cap for indirect bonding and its transfer to the patient's teeth. This appliance causes less discomfort and provides better oral hygiene for the patients than do conventional appliances such as the bracket, pendulum, and distal jet. The treatment time is also shorter with the new appliance than with full-fixed appliances. Moreover, the applicability of the new appliance can be expanded to many cases by using screws or splinting with adjacent teeth to improve anchorage.
본 연구는 브라켓 간접부착술식시 레진 베이스의 두께에 따른 전단결합강도와 파절양상을 비교함으로써 레진 베이스 두께 증가시 전단결합강도의 저하여부를 평가하기 위하여 시행되었다. 소의 하악 절치를 포매하여 만든 레진블럭에 micromanipulator를 사용하여 치면과 브라켓 기저면 사이의 광중합형 접착제가 0.0, 0.5, 1.0, 1.5, 2.0 mm두께가 되도록 각각 브라켓을 부착한 다음 만능물성시험기를 이용하여 치면으로부터 하중 위치까지의 거리를 일정하게 유지하면서 레진 베이스의 두께를 증가시킨 경우와 레진 베이스 두께의 증가와 함께 치면으로부터 하중 위치까지의 거리를 증가시킨 경우로 나누어 전단결합강도를 측정하고 파절양상을 관찰하여 다음과 같은 결과를 얻었다. 1. 치면으로부터 하중 위치까지의 거리를 일정하게 유지한 경우 레진 베이스 두께의 증가와 함께 브라켓 기저부로부터 하중 위치까지의 거리가 감소함에 따라 전단결합강도가 유의하게 증가하였다. 2. 레진 베이스 두께의 증가와 함께 치면으로부터 하중 위치까지의 거리를 증가시킨 경우 전단결합강도가 감소하는 것으로 나타났으나 그 유의차는 미미하였다. 3. 접착제 잔류지수를 이용하여 레진 베이스의 두께에 따른 파절양상을 비교 관찰한 결과 유의한 차이를 보이지 않았다. 이상의 실험결과를 볼 때 브라켓 부착시 레진 베이스의 두께에 따른 전단결합강도는 브라켓 기저부로부터 하중 위치까지의 거리가 증가함에 따라 감소하는 반면 레진 베이스 두께의 영향은 크게 받지 않는 것으로 나타났다.
Su, Naichuan;Yue, Li;Liao, Yunmao;Liu, Wenjia;Zhang, Hai;Li, Xin;Wang, Hang;Shen, Jiefei
The Journal of Advanced Prosthodontics
/
제7권3호
/
pp.214-223
/
2015
PURPOSE. To measure the surface loss of dental restorative zirconia and the short-term bond strength between an indirect composite resin (ICR) and zirconia ceramic after various sandblasting processes. MATERIALS AND METHODS. Three hundred zirconia bars were randomly divided into 25 groups according to the type of sandblasting performed with pressures of 0.1, 0.2, 0.4 and 0.6 MPa, sandblasting times of 7, 14 and 21 seconds, and alumina powder sizes of 50 and $110{\mu}m$. The control group did not receive sandblasting. The volume loss and height loss on zirconia surface after sandblasting and the shear bond strength (SBS) between the sandblasted zirconia and ICR after 24-h immersion were measured for each group using multivariate analysis of variance (ANOVA) and Least Significance Difference (LSD) test (${\alpha}$=.05). After sandblasting, the failure modes of the ICR/zirconia surfaces were observed using scanning electron microscopy. RESULTS. The volume loss and height loss were increased with higher sandblasting pressure and longer sandblasting treatment, but they decreased with larger powder size. SBS was significantly increased by increasing the sandblasting time from 7 seconds to 14 seconds and from 14 seconds to 21 seconds, as well as increasing the size of alumina powder from $50{\mu}m$ to $110{\mu}m$. SBS was significantly increased from 0.1 MPa to 0.2 MPa according to the size of alumina powder. However, the SBSs were not significantly different with the sandblasting pressure of 0.2, 0.4 and 0.6 MPa. The possibilities of the combination of both adhesive failure and cohesive failure within the ICR were higher with the increases in bonding strength. CONCLUSION. Based on the findings of this study, sandblasting with alumina particles at 0.2 MPa, 21 seconds and the powder size of $110{\mu}m$ is recommended for dental applications to improve the bonding between zirconia core and ICR.
이 연구의 목적은 수종의 상아질 접착시스템이 즉시 및 지연 상아질 봉쇄에서 미세인장결합강도에 미치는 영향을 평가하는 것이었다. 18개의 발거된 대구치를 사용하여 지연 상아질 봉쇄그룹은 노출된 상아질면을 임시수복하였으며, 1주간 보관 후, 접착제에 따라 3개의 소그룹으로 나누어 도포하였다; SB 그룹 (3 단계 산 부식 접착제), SE 그룹 (2단계 자가 부식 접착제), XE 그룹 (1단계 자가 부식 접착제). 즉시 상아질 봉쇄그룹은 3개의 소그룹으로 나누어 접착제를 도포하고 임시수복 후 1주간 보관하였다. 모든 시편은 간접 복합레진과 레진 시멘트로 합착하고 미세인장결합강도를 측정하여, 다음과 같은 결과를 얻었다. 1. 즉시 상아질 봉쇄그룹은 지연 상아질 봉쇄그룹에 비해 3단계 산 부식과 2단계 자가 부식 접착제에서 높은 미세인장결합강도를 보였다 (p < 0.05). 2. 즉시 및 지연 상아질 봉쇄그룹 모두 미세인장결합강도는 3단계 산 부식, 2단계 자가 부식, 1단계 자가 부식 접착제순으로 감소하였고, 즉시 상아질 봉쇄그룹에서는 1단계 자가 부식 접착제와 다른 소그룹간 유의한 차이가 있었으며 (p< 0.05), 지연 상아질 봉쇄 그룹에서는 모든 소그룹간 유의한 차이가 있었다 (p < 0.05). 3. 파절 양상은 대부분 혼합성 파절을 보였으며, 1단계 자가 부식 접착제에서만 접착성 파절을 보였다.
Incidence of using esthetic composite resin in the posterior area is increasing but there were lots of inconsistent reports about their microleakage and marginal adaptation. The purpose of this study was to evaluate the differences of microleakage and marginal adaptation according to restorative techniques. 30 cavities with enamel gingival margin were prepared and restored with 3 types of composite resin [Z-100($Scotchbond^{TM}$ MP), AELITEFIL ($Onestep^{TM}$), Her culite XRV(Fuji BOND LC)] in direct technique and another 30 cavities were restored with preformed CR inlays and 3 different modern resin and resin-modified GI cements (Superbond C&B, Choice, Fuji Duet). Samples were chemically stressed in 75% ethanol for 24 hours and were thermocycled (5-$55^{\circ}C$(500 times. The degree of microleakage through proximal and gingival margins was examined by 1 % MB dye and the degree of marginal adaptation by examining the margins via SEM. The following results were obtained ; 1. In direct groups, Herculite XRV [Fuji BOND LC, 35.13 (15.50) %] group showed statistically different, less microleakage than Z-100 [$Scotchbond^{TM}$ MP, 72.91 (16.91 %] group and AELITEFIL [One-step, 93.73 (13.66) %] group (p<0.05). 2. In indirect groups, the degree of microleakage in Mean(S.D.) were: Super bond C & B [39.00 (24.35) %], Choice [57.19 (33.80) %], Fuji Duet [58.22 (40.36) %]. But there was no significant difference. 3. There was no significant difference between resin cement and resin-modified GI cement. 4. There were gaps at the interface with the tooth structure, but no gap was seen at the interface with restoration in all specimens. 5. In direct groups, Herculite XRV(Fuji BOND LC) group made little gap compared with other groups, but 40-$50{\mu}m$ thickness of bonding agent, Fuji BOND LC, looked like a cement used in indirect technique. 6. All indirect groups showed a variety of cement thickness, from less than $20{\mu}m$ to over $100{\mu}m$ and that dimension of buccal/lingual margin was less than that of gingival margin.
With the increase in number of the athletic population and elderly demographic, the demand for orthopedic splints, which are used to support a damaged body, has rapidly increased. Current splints mainly consist of inner and outer parts, which are multiple fabrics covered with polyurethane and nonwoven fabrics, respectively. However, the laminated materials with directly applied pre-polymer coating lead to a high defect rate because of the uneven thickness on the surface. Thus, this study proposes an indirect coating method using a precise clearance controller, which enables the even application of the coating material on multiple inner parts while maintaining a constant thickness. In addition, a roll-to-roll (R2R) technique is applied instead of the sewing mechanism to bond the inner and outer materials together and enhance the productivity in the final stage. In the advanced methods, there is a storage tank that contains polyurethane, a clearance controller, and pairs of rollers in the upper and lower rows. To improve the quality of the products and optimize the equipment, three controllable factors are determined: the viscosity of polyurethane, angle of the gap controller and number of pairs of rollers in the R2R system.
스마트폰, 태블릿과 같은 디지털 기기의 보급이 광범위하게 확산되면서 '접근'을 중심으로 진행되던 정보격차에 대한 이론적 논의가 정보의 효과적인 '활용'과 능동적인 '생산', '공유'로 확대되고 있다. 이러한 논의가 중요한 것은 디지털 기술의 활용 행태가 개인의 인적, 물적 네트워크에 영향을 미침으로써 사회적 불평등 구조를 재생산하거나 심화시키는 결과를 가져올 수 있기 때문이다. 본 연구에서는 개인이 맺고 있는 사회적 관계가 두 가지 유형의 사회적 자본(결속형, 가교형)을 매개로 디지털 기기의 경제적 활용과 사회참여적 활용에 미치는 영향에 대해 살펴보았다. 전문리서치 업체를 통해 수집된 740건의 설문조사 데이터에 대한 실증분석 결과, 개인의 사회적 관계가 수평적일수록 결속형 사회적 자본과 가교형 사회적 자본이 증가하는 것으로 나타났다. 그러나 개인의 사회적 관계는 두 가지 형태의 디지털 기기 활용(경제적, 사회참여적) 모두에 직접적인 영향보다는 사회적 자본을 통한 간접적인 영향을 미치는 것으로 나타났다. 특히, 가교형 사회적 자본의 경우 두 가지 형태의 디지털 기기 활용 모두에 대해 매개효과가 존재했지만, 결속형 사회적 자본은 경제적 활용에 대해서만 매개효과가 존재하는 것으로 나타났다. 도출된 결과에 대한 해석과 함께 이론적, 실무적 시사점을 제시하였다.
The lingual multibracket appliance was developed to overcome the unesthetic nature of traditional fixed orthodontic labial appliances; however, treatment with this appliance was regarded as very difficult as well as a time-consuming. Recently, these problems have been reduced because of advances in lingual bracket systems, improved indirect bonding technique and the development of more flexible wires. There has been a marked increase in the number of adults desiring orthodontic treatment over recent years and many of these patients tend to seek invisible orthodontic appliances due to esthetic reasons. Although the lingual multibracket treatment is not ideal, this form of treatment is currently the best option for the patients with esthetic concerns. Here, I would like to present a case treated successfully with lingual multibracket appliance.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.